Images Not Loading On Neowin? Solution Here


Recommended Posts

If Neowin loads similarly to the picture below, here is how you fix it. You can do one of two things:

1) Clear out your cache

2) Simply press CTRL+F5

This has been asked A LOT in the past few days and it's getting out of hand. Please keep it all in this one thread.

post-1798-1107545923_thumb.jpg

it hapenned to me and this option was the cause. You need to laways check "Load Images" lol

I don't know why it wasnt enabled one day, i use nightlies.

585414381[/snapback]

AFAIK, It's just CSS caching problem

What I do is set the browser cache to 0 so I never see this problem. Unless your are on dailup there is no real NEED to have a cache anyway, in my book.

Here's how: Tools/options/privacy/cache then change that value "Use up to _____ KB of disk space for cache" to 0 (zero).

Nocache.JPG

And I never see this problem, I like my webpages to be current anyway no cache stuff.

What I do is set the browser cache to 0 so I never see this problem. Unless your are on dailup there is no real NEED to have a cache anyway, in my book.

Here's how: Tools/options/privacy/cache  then change that value "Use up to _____ KB of disk space for cache" to 0 (zero).

Nocache.JPG

And I never see this problem, I like my webpages to be current anyway no cache stuff.

585430414[/snapback]

that also hurts Neowin because it has to download more each time you visit.

bangbang023: you just point out all my mistake huh? you got something against me?? LOL J/K I welcome other points of view. Your always right when you do it anyway. I'll have to reconsider this then, but it's not just because of this error that I do it. I've always done this, ever since I got on broadband. I've notice that I hardly ever get rendering errors (that others complain about, be it Fx or IE), and I'm willing to bet this setting is why, no conflicts this way. However, if you don't want everyone doing this. Your welcome to remove it. I don't want to put a burden on Neowin...last thing I want.

i have the same problem ... some image always gets left unloaded :( ... also all the image holders have changed as can be seen in the image ... any ideas what mayb wrong???

585444112[/snapback]

IIRC thats adblock that changes the placeholder.

I had it once in Firefox when I mistakenly clicked and dragged Neowin into my image block list... took me ages to figure out why Neowin wouldn't load correctly. :blush: I don't even know how I managed it... :unsure:

Yeah, me too. It's annoying as hell, but I'm not giving up CCleaner :p

585446146[/snapback]

I use ccleaner and everything looks fine for me, maybe it's the method I use. btw, I changed to the lite version skin to help with the load for Neowin per bangbang023's pointing out the load that having 0 cache can create for Neowin. Hope that evens it out some.

I use ccleaner and everything looks fine for me, maybe it's the method I use. btw, I changed to the lite version skin to help with the load for Neowin per bangbang023's pointing out the load that having 0 cache can create for Neowin. Hope that evens it out some.

585449918[/snapback]

Thanks for the consideration dude, but make sure you aren't upsetting your browsing habits at all by switching skins. You are a subscriber, afterall, so you have given to Neowin in other ways already.

Thanks for the consideration dude, but make sure you aren't upsetting your browsing habits at all by switching skins. You are a subscriber, afterall, so you have given to Neowin in other ways already.

585450045[/snapback]

Thanks bangbang023, but I'm really liking the way the pages load faster now. I tried it before, but didn't give it much of a chance.

  • 3 weeks later...
  • 1 month later...
  • 2 weeks later...

@BeLGaRaTh,

Thanks for the reply. I couldn't thank you in the original thread as it was already closed.

@bangbang023,

Trust me I searched the forum before opening the thread. I don't know why but the thread you point (actually this one) does not appear in the search results. Try and search for 'ccleaner firefox skin'.

So who's to blame here? Crap cleaner or firefox? :blink:

  • 2 weeks later...
  • 1 month later...
  • 4 months later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I sort of agree with you on that. I had a telescope - a real hefty thing, although only around 500CHF - that got me so fascinated about the stars and planets. I would stare for hours, amazed that I could see the craters of the moon or the rings of Saturn in "realtime" (quotations because, y'know, speed of light and whatnot). A friend of mine has a telescope like the one mentioned in the review, and the pictures are amazing to look at. But there is something missing for me. I may as well just go to NASA's website and look through their gallery.
    • As opposed to catching bad press because it's the engine's fault? You didn't really think this through did you? lol
    • I think it depends on what you're looking for to do, and the time you have to spare. With my Dwarf 3, I easily spend 3-4 hour sessions; half an hour driving to an un-light polluted place, another half hour unpacking and setting up the smart scope + tripod for equatorial tracking, then 15 more minutes mucking around with settings and shooting calibration frames, spending a few hours shooting, merging with past photo sessions, etc. It's crazy how time flies and I often get home later than I expected. It's something I still need to set aside a good part of an evening to do, all in all. For one session, where you often need like four for best results when it comes to deep space objects. Even with a smart scope like Dwarf 3, regular non-astro photography is still way more approachable to people getting into photography. I find this is a time consuming niche no matter how I go about it. With practice, I can probably begin cutting time here but I think where smart scopes find their home is among people who love to shoot the night sky but don't have the spare time to go deep with the "navigator level" attunement to the night sky itself in addition to everything else. Having said this, _if_ you have even more time to spend on this hobby, it will probably be even more rewarding to do it more by hand and learn the skies and the details of how it all works.
    • I misread the title and thought Teams itself would be redesigned. Imagine having this one as a native WinUI app.
    • Dell, HP PCs ran into endless reboot, BitLocker recovery loops but Windows 11 isn't to blame by Sayan Sen Last month Neowin reported on a major issue on Dell systems wherein a bug in its official support tool was leading to endless blue screen of death (BSOD) and restarts. Following our report, Dell officially acknowledged its SupportAssist-related crash issue, confirming that the culprit is not Microsoft's operating system but rather a faulty version of its own remediation software. In a newly published support advisory, Dell stated that version 5.5.16.0 of Dell SupportAssist Remediation and Alienware SupportAssist Remediation can trigger blue screen errors and unexpected system restarts. The company notes that the problematic component operates independently of the main SupportAssist application, meaning users should not remove the primary SupportAssist software when troubleshooting the issue. According to Dell, the crashes are linked specifically to the SupportAssist Remediation service, which is bundled with SupportAssist OS Recovery Tools, and as such it has since released an updated version, 5.5.16.1, which is said to resolve the problem. Affected users are advised to first verify whether version 5.5.16.0 is installed by checking the Installed Apps section in Windows Settings. If so, Dell recommends updating SupportAssist OS Recovery Tools through either SupportAssist's "Update Software" feature or Dell Command Update. Dell also advises users to back up important data before performing the update and to ensure systems remain connected to power throughout the installation process. If you are still having issues though make sure to report to the Dell support forum. As it turns out though Dell is not the only PC maker currently dealing with update-related headaches as HP is also facing a separate but probably equally frustrating issue involving recent Windows Secure Boot updates that were released with recent Windows 11 Patch Tuesdays. Similar to Dell, HP also put up its own support article where it explains the issue. The company says that affected devices could hit a brick wall when booting as they run into a BitLocker recovery loop after the April 2026 updates. The problem appears to affect systems wherein the new UEFI Secure Boot CA 2023 certificates fail to apply properly. As such affected users will find themselves entering their recovery key over and over again despite the system otherwise functioning normally. HP says such PCs should be updated to the latest available BIOS version and configured with the necessary Secure Boot certificates before installing Microsoft's Windows 11 Patch Tuesday updates. Systems that are already experiencing the problem may require BIOS configuration changes to restore normal boot behavior. Admins can find information regarding that in the support article here on HP's official website.
  • Recent Achievements

    • One Month Later
      DJC50PLUS earned a badge
      One Month Later
    • Week One Done
      DJC50PLUS earned a badge
      Week One Done
    • Proficient
      Eric Biran went up a rank
      Proficient
    • Dedicated
      Conjor earned a badge
      Dedicated
    • Week One Done
      Windows Guy earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      493
    2. 2
      PsYcHoKiLLa
      246
    3. 3
      Steven P.
      72
    4. 4
      +Edouard
      69
    5. 5
      neufuse
      68
  • Tell a friend

    Love Neowin? Tell a friend!