Better Sound In EMU10 Based Cards


Recommended Posts

EDIT: Sorry for not updating it and finish the guide. I had a car accident last weekend and was in the hospital for the week. I will finish it tomorrow and explain how to congifure the settings, and such. Thanks for those who read it and commented on it.

EDIT 2: Guide Finished, Enjoy!

Well, I have read tons of guides here on Neowin, but never seen one for sound. I have seen some Winamp ones, but not for sound cards and its drivers. So I decided to write a guide of my own, based on my own experiences and ideas. Althought this might be good for some, others might hate it. This is my first shot at a guide, so please feel free to comment on it, wether it be negative or positive.

As we all know, Creative cards are very popular. I can say Ive always owned a creative card and I know most of the members here on Neowin have one. Wether it be a Sound Blaster Live! or an Audigy 2ZS or whatever. Also, many of us like to get the best from our hardware. We softmod our treasured pieces of equipment for bettery funcionality, stability, etc etc. We try the best drivers, configure them to our tastes and so forth.

Well, A few months back I came across these drivers for EMU10 based cards. They are called the Kx Project drivers, which can be found at their website.

I have personally used this for my SB Live! 5.1 for about a year, give or take. And I have never had a single complaint. They are very easy to install, stable, and provide lots of configuration opportunities to get the best out of your sound card. Now please note, these drivers are intended more on the music area of sound. They do not do anything for things such as THX and EAX enhancements in gaming. So these might NOT be very attractive for hardcore gamers who want to feel every BANG they get in Battlefield 2. These are more for the music junkie who either edits, makes or otherwise listens to music on theyre computers most of the time.

Installation:

The installation for these drivers is very straight forward. You dont have to be a l33t computer user to use them. For one the drivers, as stated above, can be found at the website by going into the downloads section. The latest stable version of the drivers available is 5.10.0.3537. They are intended for SBLive, EMU APS, Audigy, Audigy2 and SB 512 cards, although I have read they work on others as well. Please make sure to download the full version. Once downloaded you just have to install them, and once installed they will take you to the main application to install the drivers. See below for some screenshots..

:NOTE: I advice uninstalling previous Creative Live drivers, as they might or might not interfere with the Kx drivers:

The main download section, make sure to download the ones circled into a place on your computer where you can find them

untitled8fw.jpg

Once downloaded, just double click the icon and it will be pretty self explanatory

untitled8yv.jpg

After the program has installed, it will take you to the following window. In this part you will click install and click yes to any prompts it will give you. Once done, just accept to reboot.

untitled7dw.jpg

Congratulations, you have successfully installed the Kx Project drivers. Now on to configuration and usage.

Configuration:

These drivers have alot of things you can play with. These are just some of the main ones I personally use to improve audio with my music. More information on other settings, and plugins, can be found at the forums the Kx project site has at Driverheaven.

Once installed, you will find the following icon in your taskbar. Please right click it and select Kx Mixer

untitled5ph.jpg

Once done with that, you will be taken to the main Kx mixer. Here you can enable 5.1 audio, change the volume levels for each individual speaker, the bass levels, recording levels, enable Surround audio (Low, Medium, High settings) and many other things

untitled29en.jpg

At this screen you have a variety of settings. These are all very dependant on how you have your speakers placed, the type of music you listen to, and your personal taste in how your music sounds. I like my music to have a balance between good, bumpin, bass and a surround sound effect. Heres how Ive set up mine for this.

post-13266-1124128122.jpg

As I said before, its all dependant on where and how youve set up your speakers. Also, on how many you have as well. Take note these drivers take anything from SB Live! to Audigy2 and above, so the combination of speakers can be 4.1 - 7.1. Heres how Ive setup the speakers in my room, just to give you an idea of why Ive setup my speaker volumes the way I did.

post-13266-1124129099_thumb.jpg

Another note I should add in to how Ive setup my speaker settings in the drivers is this...In the first screen of the Kx mixer I have my Master Mixer at 100% and the Wave at about 15%. I do this because if I go too high with the wave, I get alot of distortion with music and games. Also in this same screen, I have the "Toggle front Swap and read mode" option checked, which should be done by default when you install these drivers. Along with that, in the back of my SB Live! instead of pluging the green into the green colored part on my computer, I switch them up. I put the black into the green, and green into the black. This adds better sound for me, but like I said before, its all dependant on taste. In the same screen where Ive mentioned these settings, you can enable 2.1, 4.1, or 5.1 audio. To access this setting, you can also just right click the Kx project icon on the taskbar and go to Add-Ons>Surround + [8]. Here you can do alot of things. My setup in that specific area is 5.1, for Surround I have copy, and I check off Subwoofer Output as well as Bass redirection. The bottom part I put all the way up to 320hz and voila.

Also, one added thing. Open Kx mixer and go to the icon where it says AC 97, in this screen go to the 3DSE area. Here you can choose Low, Normal or High levels of 3DSE. This all depends on your taste as well as your speakers. Some speakers might sound a bit awful when put in high, so normal should fit most users. I have mine set to normal, and I get good bass and speaker output. I listen to a variety of music, alot of which is spanish, but also I listen to old school punk and things of the sort. But were all different, so as I continue to repeat, configure them to YOUR taste. Put on Winamp, and let your favorite song play, during the playtime edit your speakers to how you like them.

I hope you guys find this guide useful in someway. Im sorry if I didnt get into TO much detail, but I pretty much covered the basics for an everyday user who listens to music. If youd like to learn more about the musician based areas of the Kx project drivers, please visit theyre website or the forum they have on driverheaven. It has a wealth of information for anyone whod like to learn how to use the drivers more in depth. Also if youd like to a DSP guide, contact _R2D2 here on Neowin, and as he stated on a post, he'll look into making one.

If you have any questions or comments, or would like me to add in anything else to the guide, feel free to contact me. Otherwise, Enjoy your new sound drivers :yes:

Edited by Daviesbad04
Link to comment
https://www.neowin.net/forum/topic/347770-better-sound-in-emu10-based-cards/
Share on other sites

I've been using kX drivers for my SB Live! 5.1 for quite a long time now and its great!

I recommand it!

Tril from the DH forums had wrote a Noise Sharpening DSP for kX quite some time ago.

Its the same as the Noise Sharpening plugin of Foobar but this DSP covers systemwide not only the music player.

Noise Sharpening brings out the detail of the music.

  • 2 weeks later...

I use KX for my Dell SBlive.

They are primarily made for people who makes music\audiophiles, as you can do almost anything with the dsp, like using the hardware-based effects as effect sends in Cubase.

The best thing is the asio-drivers. I get 10ms with my card. Not bad for a SBlive.

If someone wants a DSP-guide, let me know, and I'll make one.

Yea, this isnt excellent for gaming and using full effects on games and such. I personally use this for listening to music because it gives you greater options to change each and every speaker individually.

586380689[/snapback]

And it also makes live more easy for us musicians.

You have greater controls over the inputs, you can give cubase fx-sends to the hardware based effects (reverb, delay, chorus, vocoder, and distortion), and there are nowdays plugins as drummachines and (digital remakes of) analog synths.

And as I said, really low latency asio-drivers.

Yea, thats pretty much the aim for these drivers. The music enthusiast, wether it be a listener or a musician. It adds effects, among other plug ins and low latency asio-drivers. I personally dont use any of those, but I am a music enthusiast and most of the time I spend on the computer, Im listening to music. And the original creative drivers didnt give me as much option on how I listened to my music, as these drivers do.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • How old is this tip? Seems 15-20 years old? Processor states for the CPU under Windows power options has been a thing for a long, long time. It certainly isn't new or hidden... Also, with laptops it doesn't make any difference what OS you are running, all of them are configured for battery longevity over performance, for obvious reasons.
    • I can't believe Starmer is still there...his party lost so big. He's a stubborn coot, but this is largely unenforceable, so I would imagine he'll be resigning soon. A key here is for parents to buy their kids phones sans Internet access--and set up the Internet at home, where mom and day can, you know, act like parents instead expecting the government to raise their kids.
    • EA launches in-game advertising platform for brands to "connect with audiences" by Pulasthi Ariyasinghe The gaming giant Electronic Arts is exploring more ways to inject real-life brands into its games. Announced today as EA Advertising, the new platform is attempting to make it easier for brands to reach out for deals with the company and put their products inside titles like EA Sports FC, Madden, NHL, Skate, or The Sims. EA revealed that its EA Sports side of the company brings in "hundreds of millions of players across console, PC, and mobile" every year. Fan engagement of these titles was also touted as being "extraordinary," with 23,000 NFL seasons worth of games being played in Madden NFL daily, while EA Sports FC sees over a billion matches a day. “Players come to EA’s games and live experiences every day to play, watch, create and connect,” said David Tinson, Chief Experiences Officer at Electronic Arts. “That gives brands a meaningful opportunity to show up in ways that add value and respect the player experience, while maintaining authenticity in the worlds our teams are building. With EA Advertising, we’re helping brands become part of those moments in ways that are relevant and built for players.” Using the new program EA Advertising, brands will be able to inject their products into games in real-time via dynamic placement. EA says partners will have access to everything from stadium signage in sports games and targeted adverts to in-game content custom-made for the brands. These are described as additions designed to "enhance, not disrupt" experiences. "In these interactive gameplay environments, brands become part of the game itself, reflecting how players engage with advertising in real-world contexts," adds the company "Brands can activate across live environments, tailoring placements to meet campaign objectives, and update campaigns with ongoing optimization informed by aggregated engagement insights." Current real-world brand partnerships EA has built into its games include Visa (EA Sports FC and College Football), Lowe's (EA Sports FC, Madden NFL, and College Football), Red Bull (EA SPORTS FC), Xfinity and Peacock (EA SPORTS FC), and Mountain Dew’s (College Football).
    • Will be surprised if there isn't a new ver of youtube just for labelled educational content
    • UK to ban under-16s from social media following a six-week trial with teenagers by Paul Hill Credit: Pexels A few months ago, Neowin reported that the UK was trialing a social media ban with 300 teenagers for six weeks, that testing has come to an end, and Prime Minister Keir Starmer has announced that the country will ban under-16s from social media. Starmer said that this technology is making children unhappy and making it easier for bullies to harass and abuse them. He continued to talk about the addictive nature of social media, saying that it uses an infinite scroll designed to lock users in for hours. He said this interferes with children doing their homework, reading, playing with friends outside, and going to bed on time. Tackling the idea that nothing can be done about social media, Starmer said: The government’s action won’t stop at social media either, the PM said. It plans to take action on gaming services and livestreaming platforms. Right now, he said, strangers can contact any child unchecked. He said this wouldn’t happen in real life, and the government is going to stop it from happening online, too. The Labour government has overseen the introduction of the Online Safety Act, a big change to the internet which includes age verification on adult websites. This has led to a fair bit of backlash, but overall, the government is pushing ahead with these changes.
  • Recent Achievements

    • Week One Done
      Jeroen Wilms earned a badge
      Week One Done
    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      511
    2. 2
      +Edouard
      200
    3. 3
      PsYcHoKiLLa
      136
    4. 4
      ATLien_0
      91
    5. 5
      Steven P.
      84
  • Tell a friend

    Love Neowin? Tell a friend!