Minneapolis: Bridge collapses into Mississippi River


Recommended Posts

Bridge Collapses Into Miss. River

A freeway bridge spanning the Mississippi River collapsed during evening rush hour Wednesday, sending many cars into the water.

Tons of concrete collapsed and there were injuries, authorities said. Survivors were being carried up the riverbank.

Some people were stranded on parts of the bridge that weren't completely submerged.The entire span of the Interstate 35W bridge collapsed about 6:05 p.m. where the freeway crosses the river near University Avenue in Minneapolis.

Source: ABC News ;CNN

Could this be part of a terrorist attack? How old was the bridge?

Not an attack. The bridge was built in 1967, and was under some re-construction work (mostly on the road surface, potholes and such). I read one report that a structural engineer indicated that it seemed to be a steel failure, not a concrete failure, and that the bridge had passed both of its previous two inspections in the past two years.

EDIT: Minnesota born and raised here. My condolences to the families of those who died.

I found this image of the interstate W35 bridge before it collapsed... it looks pretty flimsy for a bridge if you ask me:

http://www.mymotormaid.com/news/bridge.html

Wow, that's significantly higher off the ground than I thought it would be (for some reason). That'd be a hell of a ride (if you survived it).

I'm hearing and reading 3 people dead so far. 50-ish cars involved? Oy... interesting to see a bridge that destroyed just from a collapse.

It was a 40-year-old arch bridge, it's not going to be nearly as durable as something like a suspension bridge. Oddly enough, the bridge was actually undergoing some renovation just before it collapsed, I wonder if that in any way compromised the foundations of the bridge.

Not an attack. The bridge was built in 1967, and was under some re-construction work (mostly on the road surface, potholes and such). I read one report that a structural engineer indicated that it seemed to be a steel failure, not a concrete failure, and that the bridge had passed both of its previous two inspections in the past two years.

EDIT: Minnesota born and raised here. My condolences to the families of those who died.

ahh ok. Just checking. Stange this had collapsed.it was Bulit in 1967 should have stayed. Now a local bridge, located in portland oregon, was bulit in 1925

20040913%20Span%20from%20NE%20medium.jpg

The Sellwood Bridge. Already showing cracks, they had to limet the bridge to 10 tons, causing the busses and trucks to go else ware. They are working on a way to get enough money to replace the bridge. The bridge, the only closest way to get to Oaks Park. A Local amusment park just on the other side of the river. I do bleive the Sellwood bridge is the oldest in the city of portland. Only time untill this one colpases.

I found this image of the interstate W35 bridge before it collapsed... it looks pretty flimsy for a bridge if you ask me:

http://www.mymotormaid.com/news/bridge.html

Yeah, wheres the support? theres NO support...

Yet the bridge has passed two inspections in the last two years. Perhaps they have been using clerks who only look for obvious cracks and not professional engineers to do the inspections.
Yeah, I think those were 'state' inspections. It seems that a federal inspection rated the bridge with a score of 50 (scale of 1 to 120). I guess it makes you wonder how close to "fail" those other "pass" ratings were...

I live in a Southern suburb of Minneapolis and, as someone who has driven over this bridge numerous times, it makes me shiver to think about what was going through people's heads when they flipped into the water. One woman told her story of immediately rolling her window down and swimming out. The water is only 8 to 10ft (2-1/2 to 3m) deep in that area.

What really scares me is what would have happened had I been on there and I had my son in the car. Could I have gotten him out in time? Would we both be dead? I scares the hell out of me just to think of that happening.

My condolences to all who are affected by this. I'm sure I know someone who will have lost someone in this tragedy.

This was unbelievable yesterday (still is). I live about 15 minutes from that bridge and had to use it quite a bit when I worked at my last job. I only wish the best to those involved and their families and friends.

The local news said engineers expect that a replacement bridge will not be up until 2009-2010.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • It is silly there is no simple way to check whether this profile has been activated. CFRs are normal, but trying to even hide the fact if it's on / off seems silly, especially for something so user-facing. Surely Microsoft is "proud" of their engineering efforts on this one and ought to display it somwhere in the GUI.
    • Many Linux distros are not known for excellent battery life, so I'm not sure that is the best example. A more apt example may be Apple, but Apple's CPUs are simply far more efficient than Intel & AMD at single-threaded tasks like these, so "boosting" is not as power-hungry and less heat-inducing. Not to mention Apple will hardly engage P-cores for basic UI tasks; they use a pretty complicated QoS scheme to only activate P-cores for more serious workloads like HTML / JS execution or decompression or application launch. Microsoft is (smartly) doing it for launch, but also for UI tasks, which is the more nonsensical part: why ... do Windows 11's UIs need modern CPUs to boost? It should load so quickly that there's not even time for the CPU to boost.
    • I've not seen any controlled testing and, judging by Microsoft's mentality, within a year, they'll have added so much more bloat, it'll undo any perceptible latency benefit and we'll have boosted the CPU clocks for nothing.
    • It depends: heat soak is a thing. Initially on cold boot-up, the heatsinks & heatpipes are at ambient temp. After heatsinks & heatpipes warm up (through normal usage), they don't immediately cool to ambient temp when the load goes away. So their baseline is higher and the trigger point for fans is much less stress. Add a few more CPU spikes → it's too hot to stay at the same fan RPM → fans get triggered to start up up much sooner / get triggered to ramp much more quickly.
    • Can LibreOffice just shut up and worry about themselves and stop comparing themselves? Do we see Microsoft complaining about euro office?
  • Recent Achievements

    • One Year In
      slackerzz earned a badge
      One Year In
    • One Year In
      highriskpaym earned a badge
      One Year In
    • One Month Later
      highriskpaym earned a badge
      One Month Later
    • Week One Done
      highriskpaym earned a badge
      Week One Done
    • Week One Done
      FBSPL earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      501
    2. 2
      PsYcHoKiLLa
      198
    3. 3
      +Edouard
      157
    4. 4
      Steven P.
      84
    5. 5
      ATLien_0
      74
  • Tell a friend

    Love Neowin? Tell a friend!