Windows Vista SP1 RC Refresh 2


Recommended Posts

Windows Vista Service Pack 1 RC Refresh 2 is available to Beta testers through Windows Update. Experience the WU installation path for Windows Vista SP1 by following 4 simple steps and give us your feedback to improve our quality.

Notice: The following Windows Vista Service Pack 1 (SP1) builds represent RC Refresh 2 code. These builds incorporate all tested changes up to Microsoft's RC Refresh 2 date. Please note that these builds are provided for additional beta testing purposes only and may not be distributed. These builds are provided to you "as is" and are subject to change. Your right to use these builds will expire upon Microsoft's commercial release of SP1 to the public.

Systems running on Windows Vista RTM typically require two or three updates before SP1 can be installed. These updates are permanent on your Windows Vista systems. Windows Update will detect your system configuration and offer the prerequisite packages that are applicable to your system. Based on the state of your system, Windows Update will offer you all the applicable prerequisite packages and SP1 in a sequential order. For details, please see the instructions below.

If you already installed the Service Pack to your machine, you must uninstall the previous build before installing RC Refresh 2.

Here are 4 simple steps to get SP1 on your machine.

On Vista RTM

1. Download the script to your machine and run it on elevated prompt after removing ".remove" from the filename.

? To run the script on elevated prompt, after you download the script, right click on the file and select "Run as administrator" option.

? The script sets a registry key on your system. The registry key is required for WU server to recognize your machine as a valid target for Vista SP1.

? After running the script, Windows Update automatic updates will automatically update your machine over the next several days with the appropriate prerequisites and then offer the Service Pack. If you would like to install SP1 quicker you can manually do the next few steps to speed up the process.

2. Install all pending "Important" updates and the pre-requisite updates for SP1. You may have to repeat this several times to get fully up to date.

? Check for updates on Windows Update. Go to Control Panel ? System and Maintenance ? Windows Update and check for updates by clicking on "Check for Updates" in the top left of the task pane.

? You will be offered all previously released Windows Vista updates that you may not have installed on your system. Install all applicable updates.

? If you have Windows Vista Ultimate, or Windows Vista Enterprise, Update for Windows (KB935509) should be in this list. If you have any other version, Update for Windows KB938371 should show up in this list. Reboot your machine when prompted. If you do not have Vista Ultimate or Enterprise, Update for Windows KB938371 should show up first and KB935509 is not required.

? If you reboot and rescan on Windows Update right away, sometimes times you may not see all updates. This may be caused by the installer service completing the install of the prior update. Please wait 5-10 minutes and scan again. (This delay should not be required for the final SP1 release.)

3. Install Update for Windows (KB937287).

? Update for Windows (KB937287) it does not require a reboot. This is the "installer" code for the service pack.

4. Install Windows Vista Service Pack 1 (KB936330).

? Wait for 10-15 minutes prior to checking for updates again, to enable the installer to complete it's self installation.

? Check for updates on Windows Update again. Windows Vista Service Pack 1 IKB936330) should be available.

Don't forget to post your mini-review in the newsgroups and complete the install survey located here: http://connect.microsoft.com/windows/Surve...x?SurveyID=5418.

Regards,

The Windows Beta Team

@echo off

well  lo0ks like those guys hate the fact that i give them access to the build
so...
enjoy the blank space now

for all the ppl

you can say thanks to the haters

Enjoy

For the admins:

i dont know if i can post the code or not

so if i cant please edit the thing

Edited by SaT117
Link to comment
https://www.neowin.net/forum/topic/615753-windows-vista-sp1-rc-refresh-2/
Share on other sites

lol, well I am sure that helped a few non-beta testers download the thing. Oh well. I really enjoyed RC1, it actually improved my network speed quite a bit compared to the first build.

yea its super fast and stable now :)

right now i have to uninstall the R1

to i can test the R2

i hope they made it faster :)

Erm, I really doubt it in this case. SP1 is already a public beta, and I doubt they really have many qualms with this since it promotes their product and really isn't anything secretive or anything that can defame them or put them in a bad light.

Erm, I really doubt it in this case. SP1 is already a public beta, and I doubt they really have many qualms with this since it promotes their product and really isn't anything secretive or anything that can defame them or put them in a bad light.

This release ISN'T a public release. Don't use a past release as an excuse to say the leak of this one doesn't hurt anything.

It hurts the people that actually want to test stuff and report bugs. The more people leak stuff, the groups they choose to test them get smaller and smaller and they'll choose people who've been testing software for them longer than others.

That's how it can hurt things. It can make it take longer to test and get the final versions out.

To the OP:

You knew you were breaking an NDA, that's if you're even part of the test group which I doubt you are. Either way you should know these e-mails always say not to say anything about them. You knew what you were doing posting it here so stop trying to argue with anyone who doesn't like what you're doing.

Unless you a corporate TAP tester you're never going to test stuff that actually matters so I am not sure why people think they are very important or part of a select group because they are MS beta tester, everyone is - get over it and stop being NDA police.

because like where I work, there are lots of very ridiculous rules that defy common sense at many places.. and there are people like me who like to use common sense, and there are others who say that rules are rules, and that's it.. of course they pay me to follow their nazi-like rules, so I do follow them. :)

Unless you a corporate TAP tester you're never going to test stuff that actually matters so I am not sure why people think they are very important or part of a select group because they are MS beta tester, everyone is - get over it and stop being NDA police.

lol...how else can these kidos be '1337'..i bet they wear 'im a beta tester' (written in magic marker) tee-shirts to school and when pulled over by police for speeding tell them..."but im a MS beta tester"....not only does MS give us a good OS but they give these kido's a worth of being something online because real life is too difficult for them to handle.

A fine example of someone who insted of sayin Thanks says crap

if u dont like it just close the window

and i bet that even with the comment

u alrdy use it

gezz...

what a haters

Exactly. There will always be whiners out there. Thanks though for the info on getting this installed!

Uninstalled the old SP1 RC refresh.

Ran the SP1_rcr2RK file, and found Install Update for Windows (KB937287).

Installed that, been about 20 min now, haven't seen any other updates or the SP yet. Any ideas?

Just keep refreshing...

I've installed it on my 32-bit version, and am currently installing it on my 64-bit version. It does take a little while for the service pack to show up.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Threads scales past half a billion users, brings deeper community and feed controls by Fiza Ali Meta has announced Threads crossing a major milestone of 500 million monthly active users. And, at the heart of this growth sits something simple: communities. From books to basketball, parenting to music, Threads says its rise has been powered by people clustering around shared interests and, in turn, giving the platform its identity. In response, the platform is expanding its Communities feature beyond beta and introducing a set of new tools designed to make participation easier and more engaging. A redesigned Communities Hub will now appear in the main navigation menu, allowing users to jump between groups without leaving their feed. Each community will also receive a distinct Community Icon, giving them clearer visual identity and making them easier to recognise across the platform. Then there’s Community Progress, which is a kind of live gauge showing how close a topic is to becoming a full-fledged community, alongside guidance on how users can contribute to its development. In addition, Meta is also expanding its Community Champions programme, recognising more users who actively contribute to community engagement. And then things go more local; Local Communities is already available in 100 countries, including North America, South America, Asia, and Europe but are now rolling out with native-language tags starting in Japan, South Korea, and Taiwan. The platform is also expanding Live Chats to more communities in the coming weeks, adding features such as co-hosting and the ability to quote moments directly into users’ feeds. Beyond communities, Meta is tightening the loop between users and their feeds. Earlier this year came "Dear Algo," a feature that lets people tell Threads what they want more or less of. Now it’s being paired with a new tool, "Your Algo." It allows people to adjust how frequently certain topics appear, with options lasting one, three, or seven days. Meta says these preferences remain private and can be managed alongside “Dear Algo” in a unified settings hub. The rollout begins in the US, Canada, UK, Australia, and New Zealand. Finally, the company says these changes are part of an ongoing effort to refine Threads based on user feedback and that further updates will continue as the platform evolves.
    • You pay just $100 per TB with this rare 4TB PCIe Gen4 NVMe SSD deal by Sayan Sen SSDs and GPUs are incredibly hard to get nowadays due to high pricing. Discounts are quite rare which is why we report on them as soon as we spot a good deal. For example AMD's new 9070 GRE was finally up for sale at a very good price of just $500 thanks to a special coupon. Sadly that deal is gone but if you happen to be looking for a 4TB NVMe SSD and can spend around $400 there is a really good offer on sale that you should not miss out on as TeamGroup's 4TB G50 model is on sale for that that price which means you are only paying $100 per TB, a very good deal in the current market (purchase link under the specs table down below). The TeamGroup T-FORCE G50 NVMe SSD is a PCIe Gen4 drive and as such it promises to deliver sequential read speeds of up to 5,000 MB/s, helping accelerate game loading, file transfers, and everyday computing tasks. Since this is a 4TB drive you can use it for a gaming library to take advantage of things like DirectStorage. The SSD features an InnoGrit controller and SLC caching technology to support consistent performance. An ultra-thin, patented graphene heatsink is included to aid in heat dissipation. Get it at the link below: Team Group T-FORCE G50 4TB Internal SSD (TM8FFE004T0C129): $449.99 + $50 off w/ promo code SSF69668, limited offer => $39.99 (Sold and Shipped by Newegg US) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • I agree. I also think Phil stayed too long. They should definitely fire whoever thought all a console platform needed was Call of Duty, Elder Scrolls, and Fallout to survive. Asha and crew are still saying they need more Elder Scrolls and Fallout games. They simply don't get it.
  • Recent Achievements

    • One Year In
      Console General earned a badge
      One Year In
    • One Year In
      Twozo Technologies earned a badge
      One Year In
    • One Month Later
      Twozo Technologies earned a badge
      One Month Later
    • Week One Done
      Twozo Technologies earned a badge
      Week One Done
    • Veteran
      branfont went up a rank
      Veteran
  • Popular Contributors

    1. 1
      +primortal
      522
    2. 2
      +Edouard
      200
    3. 3
      PsYcHoKiLLa
      110
    4. 4
      Steven P.
      89
    5. 5
      Nick H.
      71
  • Tell a friend

    Love Neowin? Tell a friend!