• 0

Preview images inside zip (or rar) without extracting

Asked by deadman36g,

 Share

Question

14 answers to this question

Recommended Posts

  • 0
Proficient

JRosenfeld

Posted
Posted (edited)

Just open the zip file in Winzip, double click on the image file (or right click on it, click open). It should open in whatever app the file extension is associated with. Or you can right click, click open with and select any other suitable app. (I have Winzip 11, not sure about earlier versions; Winzip pro has a built in image viewer, but I don't have that).

Edited by JRosenfeld
  • 0
Explorer

blogsdna

Posted
Posted

Yah it would be doing that way but its like you dont have to actually click on each images to have preview rather this application will do it for you. as well it says its fastest image loading app so delay will be very less i guess.

  • 0
Proficient

JRosenfeld

Posted
Posted
The files still get extracted to a tmp file I believe...

Yes, but the folder and file that are created in the temp folder are automatically deleted when you close both the app in which the file is viewed and the Winzip window that you opened it from.

You can also set the working folder Winzip uses for its temp folder in its options.

  • 0
Grand Master

Andrew Lyle Global Moderator

Posted
  • Global Moderator
Posted

impossible, without some form of extraction, since it requires an unzipping of sort to view the files.

The whole point on "Zipping" is to reduce file size, and make it easier to transfer, and it re-writes the files into smaller bytes, making them unviewable / readable, that the human brain can understand

  • 0
Grand Master

+Xinok Subscriber²

Posted
  • Subscriber²
Posted

Pismo File Mount http://www.pismotechnic.com/pfm/ap/

This program can mount zip archives as folders, so you can view the pictures directly without extracting them. It doesn't support RAR archives though.

  • 0
Grand Master

+Nik Louch Subscriber²

Posted
  • Subscriber²
Posted

^^^ No - it DOES still extract them.

Look, the thumbnail is created by the OS reading the file - the full image file. It's not stored in header information, so whether it's extracted to memory, filesystem temporarily or filesystem properly - it is STILL extracted. No other way is possible.

  • 0
Grand Master

+Xinok Subscriber²

Posted
  • Subscriber²
Posted
^^^ No - it DOES still extract them.

Look, the thumbnail is created by the OS reading the file - the full image file. It's not stored in header information, so whether it's extracted to memory, filesystem temporarily or filesystem properly - it is STILL extracted. No other way is possible.

I think you're being too technical. JPEG, GIF, and PNG files all have to be "extracted" because they're all compressed. The point is, you can do this in memory without extracting to the hard drive, which I think is all the OP wanted.

Plus, some image files have embedded thumbnails. So rather than extracting the full image file, only the embedded thumbnail needs to be extracted.

  • 0
Grand Master

Copernic Reporter

Posted
  • Reporter
Posted
On 9/6/2008 at 11:39 PM, deadman36g said:

Is there anything I can use to preview images inside a .zip file without extracting the images?

Seer, there's also a free version available. Or you can also try https://pooi.moe/QuickLook/

 

2020-02-01_144610.png

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to question listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Posts

    • The official Funny Pictures thread

      By +Edouard · Posted

    • what other retro software do yall use

      By Som · Posted

      My father still uses a programme written in dbase3. Still manages to work with a little help from dosbox. 
    • Microsoft hides these secret Windows 11 performance boost settings available on every PC

      By hellowalkman · Posted

      Microsoft hides these secret Windows 11 performance boost settings available on every PC by Sayan Sen Windows enthusiasts often look for ways to extract as much performance out of their systems as possible, and it's often the case that they try and do so while trying to minimize the heat and power consumption. This is especially relevant in the case of mobile Windows PCs since laptops and notebooks tend to get hot and management of that heat and power is harder in such a form factor. As such users often turn to techniques like under-volting which can be used to squeeze out the maximum capabilities of a chip while also maintaining lowered power levels. There are official apps from AMD and Intel with the likes of Ryzen Master and XTU (Extreme Tuning Utility). While these are quite handy, most enthusiasts probably prefer to dig into the BIOS and play around with settings there like Curve Optimizer on Ryzen, which lets users set various frequency-voltage scaling values. These are essentially called P-States. If you are not familiar with them, Processor Power Management is done through Advanced Configuration and Power Interface (ACPI) P-states and C-states. While P-states or performance pwoer states handle CPU voltage-frequency scaling, C-states deal with CPU sleep states so that some of the CPU functions, which are not necessary at that moment, can be disabled. The P-states and C-states work together to make the processor run more efficiently. It helps the OS and apps determine which cores can be parked and which should be boosted. Of course not every user is an enthusiast or knows the technicalities and integrities of how things like overclocking or undervolting work. Thankfully for them Windows itself offers something pretty cool, though it is hidden by default on all systems. By default, Windows only has two P-States, "Minimum Processor State" and "Maximum Processor State." However, this can be changed with a Registry trick to expand the options under a secret "Processor performance boost mode" dropdown. This essentially enables the HWP or hardware P-States available on a device, and these are not controlled just by the OS itself as the underlying hardware gets involved too. In total there are five Processor Performance Boost Mode profiles that control how Windows requests and allows CPU turbo/boost behavior under the different power policies. They are: Disabled: In this mode, processor boosting is effectively turned off. The CPU will avoid entering turbo or boost frequencies and instead operate closer to its base frequency ceiling. This can significantly reduce power consumption and heat output, but at the cost of reduced burst performance and responsiveness in short workloads. Enabled: This is the standard behavior where boost functionality is allowed under normal conditions. The processor can opportunistically increase frequency when workload demands it, balancing performance gains with power and thermal constraints as managed by the system. Aggressive: Aggressive mode favors performance more heavily, allowing the CPU to enter higher boost states more readily and sustain them longer. This should in theory improve responsiveness under bursty or heavy workloads but increases power draw and thermal output compared to the default enabled behavior. Efficient Enabled: This mode still allows boosting, but with a stronger bias toward energy efficiency. The system attempts to use boost more selectively, avoiding unnecessary frequency spikes when the performance gain is marginal. Efficient Aggressive: This is a hybrid approach where boost is still performance-responsive, but the system continuously weighs efficiency more heavily than in Aggressive mode. It aims to deliver noticeable performance improvements while reducing wasted power in less demanding scenarios. Here's how to enable the Processor performance boost mode: Open Registry Editor: Press Win+R, type regedit, and click OK. Go to: HKLM\SYSTEM\CurrentControlSet\Control\Power\PowerSettings\54533251-82be-4824-96c1-47b60b740d00\be337238-0d82-4146-a960-4f3749d470c7 (where HKLM stands for HKEY_LOCAL_MACHINE_) Modify the value of Attributes from 1 to 2 (you can find modify option by right-clicking) After that, exit Registry, you should now be able to see the new "Processor performance boost mode" dropdown menu: As you can see there are now five new P-States or CPPC states or power profile available that help define the boost mode processor setting on your PC. Wrapping it up here's a quick run-down of the settings as defined by Microsoft itself. Setting Description Disabled The corresponding P-state-based behaviour is disabled. Collaborative Processor Performance Control (CPPC) behaviour is disabled. Enabled The corresponding P-state-based behaviour is enabled. CPPC behaviour is Efficient Enabled. Aggressive The corresponding P-state-based behaviour is enabled. CPPC behaviour is Aggressive. Efficient Enabled The corresponding P-state-based behaviour is Efficient. CPPC behaviour is Efficient Enabled. Efficient Aggressive The corresponding P-state-based behaviour is Efficient. CPPC behaviour is Aggressive. Aggressive At Guaranteed Windows calculates the desired extra performance above the guaranteed performance level, and asks the processor to deliver that specific performance level. Efficient Aggressive At Guaranteed Windows always asks the processor to deliver the highest possible performance above the guaranteed performance level. In the next part we shall be comparing these settings to explore how much of a benefit or regression they can provide in terms of performance and power efficiency. If you decide to change the values on your system and are experiencing problems like crashes or an overheating PC, make sure to revert the steps back to the original state.
    • EA Sports UFC 6 review: Brutal, satisfying, and surprisingly accessible to newcomers

      By Nick H. · Posted

      Bugger, you beat me to it!
    • EA Sports UFC 6 review: Brutal, satisfying, and surprisingly accessible to newcomers

      By +Good Bot, Bad Bot · Posted

      I think he means you haven't reviewed previous UFC games. Of course it doesn't matter... Every time you just report on something that involves the President even if just simply what happened you guys usually get accused of being anti-Trump. We live in fun times.

  • Recent Achievements

    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
    • One Month Later
      agatameier earned a badge
      One Month Later

  • Popular Contributors

    1. 1
      +primortal
      518
    2. 2
      +Edouard
      198
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      ATLien_0
      93
    5. 5
      Steven P.
      78
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!