CA Anti-Virus does what McAfee did last week


Recommended Posts

On Saturday 7/4 reports started that McAfee Anti-virus was breaking pc?s because of an Anti-Virus update that was quarantining Windows System files as viruses.

Well it seems that someone else wasn?t paying attention. As of this morning I have received numerous reports from clients reporting that their CA Antivirus is showing Virus alerts for the W32/alalum virus and the files that were being reported appeared to be Windows systems files. CA was quarantining those files as well. When this 1st started I assumed it was an isolated issue but with the client messages concerning this coming in more and more this morning, this definitely seems to be a wide spread issue.

The issue appears to have been caused by an update the was released within the past 12 hours as CA Anti-Virus is set up to check for updates every few hours if your have the auto update feature turned on.

The biggest concern is that when these files are quarantined, if you reboot, there is a good chance that your machine will not restart. I had 2 clients so far ?brick? their pc?s because of the restart. This point is made very clear as the WFP (Windows File protection) comes up saying that ?Files that are required to run windows properly have been replaced??? So far all reports (at least) from the clients I deal with show that CA Anti-virus 2007 ? 2009 are affected.

From the CA Forums ( http://homeofficeforum.ca.com/homeofficefo...read.php?t=4837 ) you will see others also reporting the same issue. I know CA only has 3% of the A/V market so this may not be as big as McAfee but I am passing this on as a public service. Here is what I've instructed my clients to do in the mean time that seems to clear this up

1) Open CA Anti-virus by double clicking the shield looking icon in the systray (That is in the lower right corner by the clock)

2) The Security Overview window will open. Under CA Anti-Virus you will see ?Open advanced settings?. Click that link.

3) Once you are there you will see the main overview window. From here click on the left side where it says Quarantine.

4) You will then see the list of files that are quarantined. Look for any file marked infected with W32/amalum (there is an additional part to the name after amalum but will be different on most pc?s). Highlight all items that are showing infected with amalum and then click on restore. (NOTE***That if you have another file in quarantine that shows something other than amalum as the Infection then that is probably an actual virus infection). Once the files are restored you can close the CA windows

A) You will be prompted to say do you want to restore. Click on ok for each message

5) At this point with no files in quarantine you should be able to hit cancel on the WFP.

6) You will be prompted for keeping changed files click yes to this message.

7) At this point restart P

So far no clients report files getting re-quarantined after the steps and reboot

(**Your situation my be different, so review your specific issue before following this information)

post-266234-1247161395_thumb.jpg

And this is why I still use Norton...never had any false positives with it.

http://community.norton.com/norton/board/m...e.id=2797#M2797

http://forum.worldwindcentral.com/archive/...hp?t-10261.html

http://community.norton.com/norton/board/m...ding&page=1

Not to be negative....but here are 3 different issues with Norton/Symantec products concerning False positives.

So no one is perfect. Your looking at products that are coded by humans, humans screw up. So until we get to the sky lab part of the story, there will always be a chance that something could be screwed up. We just hope that the software company (whomever they are) has a QA that isnt also sleeping.

If i was Symantec, i would buy some fancy security team with real good Pro?s, and erase Norton name from future press releases.

And maybe..maybee change Symantec name itself, and maybe..maybe then, we would trust their products again.

This is pure lack of Marketing department from Symantec, maybe very old peple running it.

TechGuyPA: The first link is not "false positive"

grik: Your statement would be more plausible if you'd capitalize your "I". At least give a more logical reason to your trolling. Your opinion sounds kiddish. I have used Norton/Symantec A/V for so long and I have not yet encounter one false positive on my system. But like TechGuyPA already mention, any product that is created by man will always have flaws.

Its a Marketing statment not if the real product is bad or even good. You obviously did not ynderstand the big picture.

Norton and Symantec branding are a bad image by just having that name.

You used to use Norton back in the days where it was malware and did not catch virus? And i would never say that Norton gives false positives, the image i have on that software, only by the name, is that no false or positive alerts if you know what i mean. Again i point to the fact im talking about the credibility/image behind the Name, dont confuse with anything thing that you tried to point out.

Regards

Its a Marketing statment not if the real product is bad or even good. You obviously did not ynderstand the big picture.

Norton and Symantec branding are a bad image by just having that name.

You used to use Norton back in the days where it was malware and did not catch virus? And i would never say that Norton gives false positives, the image i have on that software, only by the name, is that no false or positive alerts if you know what i mean. Again i point to the fact im talking about the credibility/image behind the Name, dont confuse with anything thing that you tried to point out.

Regards

I apologize. As explained I understand where you were going with the comment now.

All I tried to say was that in these days of get it out NOW it seems that the QA departments at most major software companies seem to be asleep at the well. The products themselves are made by people, people who can make mistakes, its up to the QA staff to double check and clean up any mistakes and thats were the issue is and that isnt happening....and it isnt just MS or Symantec or CA or MCafee, it seems to be almost all of them at one point or another.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Ocenaudio 3.19.3 by Razvan Serea  Ocenaudio is a full featured, fast and easy to use audio and music editor. It is the ideal software for people who need to edit and analyze audio files without complications. Ocenaudio also has powerful features that will please more advanced users. To assist ocenaudio development, a powerful toolset of audio editing, analysis and manipulation called Ocen Framework was created. ocenaudio is also based on Qt framework, a well known library for cross-platform development. Cross-platform support ocenaudio is available for all major operating systems: Microsoft Windows, Mac OS X and Linux. Native applications are generated for each platform from a common source, in order to achieve excelent performance and seamless integration with the operating system. All versions of ocenaudio have a uniform set of features and the same graphical interface, so the skills you learn in one platform can be used in the others. VST plugins support Ocenaudio supports VST (Virtual Studio Technology) plugins, giving its users access to numerous effects. Like the native effects, VST effects can use real-time preview to aide configuration. Real-time preview of effects Applying effects such as EQ, gain and filtering is an important part of audio editing. However, it is very tricky to get the desired result by adjusting the controls configuration alone: you must listen the processed audio. To ease the configuration of audio effects, ocenaudio has a real time preview feature: you hear the processed signal while adjusting the controls. The effect configuration window also includes a miniature view of the selected audio signal. You can navigate on this miniature view in the same way as you do on the main interface, selecting parts that interest you and listening to the effect result in real time. Multiselection for delicate editions To speed up complex audio files editing, ocenaudio includes multi-selection. With this amazing tool, you can simultaneously select different portions of an audio file and listen, edit or even apply an effect to them. For example, if you want to normalize only the excerpts of an interview where the interviewee is talking, just select them and apply the effect. Eficient edition of large files With ocenaudio, there is no limit to the length or the quantity of the audio files you can edit. Using an advanced memory management system, the application keeps your files open without wasting any of your computer's memory. Even in files several hours long, common editing operations such as copy, cut or paste happen almost instantly. Fully featured spectrogram Besides offering an incredible waveform view of your audio files, ocenaudio has a powerful and complete spectrogram view. In this view, you can analyze the spectral content of your audio signal with maximum clarity. Advanced users will be surprised to find that the spectrogram settings are applied in real time. The display is updated immediately when altering features such as the number of frequency bands, window type and size and dynamic range of the display. Ocenaudio 3.19.3 changelog: Fixes issues with MP4 files with more than 8 channels Fixes incorrect VBR detection for some CBR MP3 files Other bug fixes and improvements Download: Ocenaudio 64-bit | Portable | ~40.0 MB (Freeware) Download: Ocenaudio for Linux and Mac OS View: Ocenaudio Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • DiskGenius 6.2.0.1829 - All Versions: Free, Lite & Portable by Razvan Serea DiskGenius is a full-featured partition manager, which is designed to optimize disk usage for Windows users. It will efficiently help you recover lost data, resize/split partition, backup files, edit hex data, check bad sectors, manage virtual disks, erase data, etc.. Create a system image backup for current Windows with simple clicks to keep the operating system under protection. DiskGenius key features: Partition Management - It can create format, resize, extend, backup, split, hide and clone partition, both MBR and GPT are supported. Disk and partition conversion - Convert dynamic disk to basic, convert virtual disk format and convert MBR to GPT, convert primary partition to logical. File recovery - It can recover files deleted or emptied form recycle bin, recover files from damaged partition or disk and recover files by file type and supports file preview and file filter. Partition recovery - It is the best partition recovery program in that it can recover files from damaged, corrupted and RAW partitions, search for lost partition and recover files from it, besides, it can fix partition table. RAID recovery - It can reconstruct Virtual RAID and recover files from it, and all RAID types are supported. Sector Editor - A Hex editor is embedded to help users edit raw hex data and recover data manually. Backup and Restore - It can backup and restore partition including system partition, hard disk and partition table. Bad Tracks - It can check and repair bad sectors for all storage devices; check hard disk S.M.A.R.T. information. Delete files permanently - It can delete files permanently so that they can't be recovered by any data recovery software. Virtual Disk - It supports virtual disks, including VMware, Virtual PC and Virtual Box. Create WinPE bootable disk and you can manage disk partition when system crashes or there is no operating system on your computer. Support FAT12/FAT16/FAt32/exFAT/NTFS/EXT2/EXT3/EXT4 file system format. DiskGenius 6.2.0.1829 changelog: Add the "Disk Speed Test" feature. Add the "Windows Boot Repair and Conversion" feature. Add the BMB21-2019 erase standard to the "Erase Sectors" feature. Add support for restoring an individual partition from a PMFX disk image file. Enhanced The "Verify Or Repair Bad Sectors/Blocks" feature displays disk read speed in the detection window during scanning. The "Quick Partition" dialog box allows users to quickly select the number of partitions by pressing the numeric keys 1, 2, 7, 8, or 9. The "Set Volume Name" dialog box supports selecting preset volume labels provided by the software. The "Copy Sectors" feature supports resuming copy tasks after modifying the number of skipped bad sectors. Add the "TRIM Optimization" option to the format dialog box. The "Clone Partition" and "Clone Disk" features perform TRIM optimization on target partitions or disks before cloning. Add support for Not Equal To search conditions (prefixed with "!") when searching hexadecimal data in the sector editor. Optimize the display of capacity values in the program interface to show two decimal places. Add a minimize button to dialogs that may require long processing time. Enhance support for the ReFS file system. Enhance support for newer HIF and MP4 formats when recovering files by type. Enhance support for the EXT4 file system. Enhance compatibility of the "File Recovery" feature with special data structures. Fixed Fixed the issue that the selected file system type automatically reverted to NTFS after changing it to exFAT or EXT4 in the "Quick Partition" dialog box. Fixed inaccurate Unicode string search results in the "Sector Editor" feature. Fixed the issue that exceptions might occur when adding multiple disks in the "Erase Sectors" feature. Fixed the issue that insufficient target disk space was incorrectly reported in some cases when cloning, backing up, or restoring disks. Fixed the issue that folder modification timestamps were not preserved when copying files from ReFS partitions. Fixed the issue that Excel-format reports generated by features such as file copying or bad sector checking could not be opened when the report contained more than one million rows. Fixed the issue that folders were not displayed in the exclude-folder dialog box when backing up partitions to image files. Fixed the issue that the "Erase Sectors" feature could not be executed in some cases. Download: DiskGenius 6.2.0.1829 | 63.9 MB (Freeware, paid upgrade available) Download: DiskGenius Portable 64-bit | 40.0 MB Download: DiskGenius Portable 32-bit | 36.0 MB Download: DiskGenius Lite 64-bit | 13.4 MB Download: DiskGenius Lite 32-bit | 11.6 MB View: DiskGenius Home Page | DiskGenius Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Really? Use a better search engine https://www.google.com/search?...ourceid=chrome&ie=UTF-8
  • Recent Achievements

    • Week One Done
      agatameier earned a badge
      Week One Done
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      ssd21345 earned a badge
      Week One Done
    • Contributor
      MarkHughes4096 went up a rank
      Contributor
    • Dedicated
      jordanspringer earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      513
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      144
    4. 4
      ATLien_0
      95
    5. 5
      Steven P.
      75
  • Tell a friend

    Love Neowin? Tell a friend!