mkv-->PowerDVD


Recommended Posts

I need to convert a .mkv (HD content inside) file to something that will play in power DVD (.TS, mpeg2, etc). anyways, I did that through both TsMuxer and VLC. Now, when I go to play in PowerDVD I get video, but no audio. My settings for PowerDVD are in HDMI, but it says I'm not connected via audio when the video is playing. However, when I play via VLC, I get audio. I need PowerDVD for the 24p playback decoding...any suggestions?

Link to comment
https://www.neowin.net/forum/topic/847320-mkv-powerdvd/
Share on other sites

Not really it might unnecessarily transcode AAC > AC3 but it shouldn't take longer than a few minutes depending on the file size.

Its not video transcoding.

ok it just got done, and now the video won't play. it basically loads and freezes.

is there any reason not to use x264? my file has that and DTS

Edited by UNCcrombie
Link to comment
https://www.neowin.net/forum/topic/847320-mkv-powerdvd/#findComment-591869396
Share on other sites

Renaming a file obviously does nothing, so everything is kept as it is. The splitter is for Windows to know how to read the MKV container. The reason you need to rename the files is because PDVD doesn't know that format. Fortunately for you, you are running on a sophisticated OS and not on some silly hardware (as opposed to what some idiots here want you to believe :rolleyes:), so renaming it allows PDVD to use Windows for decoding. It will then play just fine, because PDVD can decode h264, DTS, DD (AC3), etc. :)

Link to comment
https://www.neowin.net/forum/topic/847320-mkv-powerdvd/#findComment-591869500
Share on other sites

Renaming a file obviously does nothing, so everything is kept as it is. The splitter is for Windows to know how to read the MKV container. The reason you need to rename the files is because PDVD doesn't know that format. Fortunately for you, you are running on a sophisticated OS and not on some silly hardware (as opposed to what some idiots here want you to believe :rolleyes:), so renaming it allows PDVD to use Windows for decoding. It will then play just fine, because PDVD can decode h264, DTS, DD (AC3), etc. :)

can't it read the container since VLC is installed? or does this add it from a windows standpoint?

Link to comment
https://www.neowin.net/forum/topic/847320-mkv-powerdvd/#findComment-591869506
Share on other sites

The splitter gives information to Windows on how to read the MKV container. For example, Windows has its own AVI splitter. PDVD doesn't know how to read MKV files, but Windows does, it will use Windows to "split" the MKV into streams.

VLC has nothing to do with this, VLC is a standalone player that has all the splitters and decoders built into it, but they are there only for VLC, not PDVD or Windows. Haali MKV Splitter is not a player, but a tool for Windows, and subsequently players using Windows to play media files.

Link to comment
https://www.neowin.net/forum/topic/847320-mkv-powerdvd/#findComment-591869518
Share on other sites

The splitter gives information to Windows on how to read the MKV container. For example, Windows has its own AVI splitter. PDVD doesn't know how to read MKV files, but Windows does, it will use Windows to "split" the MKV into streams.

VLC has nothing to do with this, VLC is a standalone player that has all the splitters and decoders built into it, but they are there only for VLC, not PDVD or Windows. Haali MKV Splitter is not a player, but a tool for Windows, and subsequently players using Windows to play media files.

ok I'll give this a shot tonight and let you know. thanks!

Link to comment
https://www.neowin.net/forum/topic/847320-mkv-powerdvd/#findComment-591871252
Share on other sites

ok I'll give this a shot tonight and let you know. thanks!

still not working. video is very jumpy. still no audio and this time I was just trying to watch it on my computer. here's my output from power DVD:

Player information:

Current drive: D:

Hardware Information:

Processor: Intel® Core2 Duo CPU P8700 @ running at 2526 MHz

3DNow! technology: Not Detected

Enhanced 3DNow! technology: Not Detected

3DNow! professional technology: Not Detected

IA MMX technology: In Use

IA sStreaming SIMD extensions: In Use

IA SSE 2: In Use

Video accelerator: DirectX VA (not in use)

Multispeaker audio device: Speakers (High Definition Audio (not in use)

S/PDIF output device: Not Detected

Hardware support:

DXVA1 Mpeg2 Support Profile: BSP:(X) IDCT:(X) MC:(O) (via VMR)

DXVA1 H.264 Support Profile: BSP: (X) BSP_Intel: (X) MC: (X) MC_ATI: (X) MC_NV: (X)

DXVA1 VC-1 Support Profile: BSP: (X) BSP_Intel: (X) IDCT: (X) MC: (X)

DXVA2 Mpeg2 Support Profile: BSP: (X) IDCT: (O) MC: (X)

DXVA2 H.264 Support Profile: BSP: (O) BSP_Intel: (X) MC: (X) MC_ATI: (X)

DXVA2 VC-1 Support Profile: BSP: (O) BSP_Intel: (X) IDCT: (X) MC: (X)

Link to comment
https://www.neowin.net/forum/topic/847320-mkv-powerdvd/#findComment-591871516
Share on other sites

You mind running your MKV file through MediaInfo? PDVD should be able to decode almost anything thrown at it? I don't think the MKV is the problem here.

General

Complete name : C:\Users\John\Desktop\9.2009.Bluray.1080p.x264.DTS.dxva-AToM\Movie\9.2009.Bluray.1080p.x264.DTS.dxva-AToM.mkv

Format : Matroska

File size : 4.31 GiB

Duration : 1h 19mn

Overall bit rate : 7 781 Kbps

Movie name : 9 nine 2009 Bluray 1080p x264 DTS dxva-AToM

Encoded date : UTC 2009-11-12 11:03:17

Writing application : mkvmerge v2.9.7 ('Tenderness') built on Jul 1 2009 18:43:35

Writing library : libebml v0.7.7 + libmatroska v0.8.1

Video

ID : 1

Format : AVC

Format/Info : Advanced Video Codec

Format profile : [email protected]

Format settings, CABAC : Yes

Format settings, ReFrames : 4 frames

Muxing mode : Container [email protected]

Codec ID : V_MPEG4/ISO/AVC

Duration : 1h 19mn

Bit rate : 6 116 Kbps

Width : 1 920 pixels

Height : 1 080 pixels

Display aspect ratio : 16:9

Frame rate : 23.976 fps

Resolution : 24 bits

Colorimetry : 4:2:0

Scan type : Progressive

Bits/(Pixel*Frame) : 0.123

Stream size : 3.38 GiB (79%)

Writing library : x264 core 76 r1271 496d79d

Encoding settings : cabac=1 / ref=4 / deblock=1:-1:-1 / analyse=0x3:0x113 / me=umh / subme=10 / psy=1 / psy_rd=1.0:0.0 / mixed_ref=1 / me_range=48 / chroma_me=1 / trellis=2 / 8x8dct=1 / cqm=0 / deadzone=21,11 / chroma_qp_offset=-2 / threads=12 / nr=0 / decimate=1 / mbaff=0 / bframes=5 / b_pyramid=0 / b_adapt=2 / b_bias=0 / direct=3 / wpredb=1 / keyint=240 / keyint_min=24 / scenecut=40 / rc_lookahead=40 / rc=crf / mbtree=1 / crf=16.0 / qcomp=0.60 / qpmin=10 / qpmax=51 / qpstep=4 / vbv_maxrate=38000 / vbv_bufsize=30000 / ip_ratio=1.40 / aq=1:1.00

Audio

ID : 2

Format : DTS

Format/Info : Digital Theater Systems

Codec ID : A_DTS

Duration : 1h 19mn

Bit rate mode : Constant

Bit rate : 1 510 Kbps

Channel(s) : 6 channels

Channel positions : Front: L C R, Surround: L R, LFE

Sampling rate : 48.0 KHz

Resolution : 24 bits

Stream size : 856 MiB (19%)

Language : English

Text #1

ID : 3

Format : ASS

Codec ID : S_TEXT/ASS

Codec ID/Info : Advanced Sub Station Alpha

Language : Swedish

Text #2

ID : 4

Format : ASS

Codec ID : S_TEXT/ASS

Codec ID/Info : Advanced Sub Station Alpha

Language : English

Text #3

ID : 5

Format : ASS

Codec ID : S_TEXT/ASS

Codec ID/Info : Advanced Sub Station Alpha

Language : Greek

Text #4

ID : 6

Format : ASS

Codec ID : S_TEXT/ASS

Codec ID/Info : Advanced Sub Station Alpha

Language : Norwegian

Text #5

ID : 7

Format : ASS

Codec ID : S_TEXT/ASS

Codec ID/Info : Advanced Sub Station Alpha

Language : Portuguese

Text #6

ID : 8

Format : ASS

Codec ID : S_TEXT/ASS

Codec ID/Info : Advanced Sub Station Alpha

Language : Romanian

Link to comment
https://www.neowin.net/forum/topic/847320-mkv-powerdvd/#findComment-591871728
Share on other sites

Don't know, everything seems normal. Renaming the MKV to AVI and opening in Power DVD should work (works for me and a lot of other people). Just to make sure, you installed this, right: http://haali.su/mkv/

yup. i'm just confused as to why i only get audio with VLC. i dont even get it with WMP

Link to comment
https://www.neowin.net/forum/topic/847320-mkv-powerdvd/#findComment-591873496
Share on other sites

^Guess I should read the whole topic next time :p

I would just dump PDVD, but I don't really understand why it's necessary for you (24p what?) so maybe you can't. I do have PDVD installed but only so I can use its video codec in KMPlayer for MPEG2 hardware acceleration.

i needed something for 24p playback so i didnt have any judder when playing blu ray .mkv files

Link to comment
https://www.neowin.net/forum/topic/847320-mkv-powerdvd/#findComment-591888142
Share on other sites

I do have PDVD installed but only so I can use its video codec in KMPlayer for MPEG2 hardware acceleration.

Why not just use the Microsoft codecs found in Windows 7 (and I think Vista). They already have hardware acceleration capabilities, and no need for having PDVD installed.

BTW, using EVR as a renderer in The KMPlayer or Media Player Classic Homecinema will remove any sort of "judder".

Link to comment
https://www.neowin.net/forum/topic/847320-mkv-powerdvd/#findComment-591904088
Share on other sites

  • 1 month later...
  • 2 weeks later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Who is paying for this 30x scale-up? Its sounds expensive.
    • Millions of users to benefit from Windows 11's new performance boost on Adobe Photoshop by Sayan Sen Despite the advent of AI-generated imagery, Adobe's Photoshop remains one of the most popular tools on this planet. Adobe does not have a publicly reported total user count but it's probably not wrong to assume there are millions. As of 2025, Adobe Creative Cloud has had approximately 41 million paid subscribers, many of whom likely use Photoshop. In addition, more than 166,000 companies worldwide are apparently also using the app. These figures are according to a very recent report by SQ Magazine. Out of them, it is fair to assume that many are probably running Windows. As such, there is good news for these users as Microsoft has announced Photoshop is getting a big 20% performance boost on x86-64 (AMD64) systems and a 13% bump-up on Arm devices. This is definitely great news for them as many have complained about the slow performance and general sluggishness of Photoshop on Windows 11 ever since the advent of the latter back in 2021. If you are wondering how Microsoft managed to do this, the answer lies in a combination of compiler-level optimizations and a technology called Sample Profile Guided Optimization (SPGO). According to Microsoft, Adobe worked closely with the company’s Visual C++ team and adopted the latest MSVC toolchain enhancements together with SPGO to squeeze more performance out of Photoshop’s CPU-bound workloads. Unlike traditional Profile Guided Optimization (PGO), which requires developers to create special instrumented builds and run lengthy training workloads, SPGO gathers performance data directly from optimized release binaries. This means Adobe could collect real-world usage information which gives a major advantage to this technique, as companies could leverage data collected from actual customer workloads rather than only relying on synthetic benchmark runs. In theory, this should allow optimizations to better reflect how users interact with software in the real world. Thanks to this, there are improvements to code layout, function inlining, hot-and-cold code separation, and other low-level tweaks that help processors execute instructions more efficiently. Essentially the compiler is better able to identify “hot” code paths, those which are most frequently executed, and optimize them accordingly.
    • "The 2TB Samsung 990 PRO NVMe SSD hits lowest price in over three months¨ I'd prefer to see the lowest price in over a year
    • Glad these prices are starting to come down, but that is still crazy. I bought the 2TB 9100 Pro (slightly more expensive version with PCIe 5.0) last year for $240.
    • The 2TB Samsung 990 PRO NVMe SSD hits lowest price in over three months by Sayan Sen Yesterday, we covered a really good deal wherein you can get a 4TB TeamGroup T-FORCE G50 NVMe PCIe Gen4 SSD for a low price of just $400 with a special discount coupon. That's just $100 per TB, making it a very good offer during these hard times. The deal is still live, so you can check it out in its dedicated article here if you do not want to miss out. Meanwhile, if you don't have that kind of budget but still wish to buy an SSD for a good price, the 2TB variant of the TeamGroup SSD at $280 its lowest price in over three months. Meanwhile, those seeking 2TB but faster performance can check out Samsung's 990 PRO, which has hit the lowest price also in the last quarter or so, as it's on sale for $370 (purchase links under the specs table down below). Thus, you want a faster drive, get the 990 Pro, or you want more capacity, grab the TeamGroup 4TB linked in the first para. The 990 PRO is a PCIe Gen4 NVMe SSD and still one of the fastest drives available today for under $500. Speaking of fast, sequential reads and writes are rated at 7450 MB/s and 6900 MB/s, respectively. The random throughputs for reads and writes are 1400K IOPS and 1550K IOPS, respectively. The 990 PRO is based on Samsung's 7th Gen V-NAND flash, and it too is TLC. It packs 2 gigs of LPDDR4 DRAM cache, which helps the random performance. The endurance rating for this is 1200 TBW (terabytes written), which should be sufficient for most users. The Samsung 990 PRO is compatible with the PlayStation 5, but if you are going to use the 990 PRO on a PC, check out the Samsung Magician app that lets you track your drive's health, update its firmware, customize various settings, and more. The tech specs are given below: Specification TeamGroup T-FORCE G50 2TB Samsung 990 PRO 2TB Interface PCIe 4.0 x4, NVMe 1.4 PCIe Gen 4.0 x4, NVMe 2.0 Form Factor M.2 2280 M.2 2280 Controller InnoGrit Controller Samsung In-house Controller NAND Flash 3D TLC 3D TLC DRAM Cache None (HMB supported) 2GB LPDDR4 Sequential Read (Max) 5,000 MB/s 7,450 MB/s Sequential Write (Max) 4,500 MB/s 6,900 MB/s Random Read (4K) Up to 600,000 IOPS Up to 1,400,000 IOPS Random Write (4K) Up to 700,000 IOPS Up to 1,550,000 IOPS TBW (Endurance) 1,300 TBW 1,200 TBW MTBF 3,000,000 hours 1,500,000 hours Operating Temperature 0°C to 70°C 0°C to 70°C Storage Temperature -40°C to 85°C -40°C to 85°C Shock Resistance 1,500G / 0.5ms 1,500G / 0.5ms Heatsink Patented Graphene Heat Spreader No Get them at the links below: Samsung 990 PRO SSD 2TB (MZ-V9P2T0B/AM): $369.99 (Sold and Shipped by Amazon US) TEAMGROUP T-Force G50 2TB SSD (TM8FFE002T0C129): $279.99 (Sold by TeamGroup, Shipped by Amazon US) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • First Post
      Jocimo earned a badge
      First Post
    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
    • Week One Done
      Prasann earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      519
    2. 2
      +Edouard
      174
    3. 3
      PsYcHoKiLLa
      90
    4. 4
      Steven P.
      81
    5. 5
      ATLien_0
      70
  • Tell a friend

    Love Neowin? Tell a friend!