Some Older Linksys Routers allow UPnP Configurable from the net


Recommended Posts

Some Older Linksys Routers allow UPnP Configurable from

update the firmware or disable UPnP immediately!

Routers from various manufacturers support UPnP (Universal Plug and Play) on their WAN interfaces, which apparently makes it possible for attackers to reconfigure them remotely via the internet and, for example, misuse them as surfing proxies or to infiltrate internal LANs. The problem was discovered by IT security specialist Daniel Garcia, who has developed the Umap tool to demonstrate the problem; the tool is available to download free of charge.

Umap detects UPnP-enabled end devices such as DSL routers and cable modems on the internet by directly retrieving the devices' XML descriptions. The required URLs and ports for some models are hard-coded into the tool. This enables the software to bypass the usual restriction that only allows UPnP to search for compatible hardware via multicast in local networks. Garcia says that entire device series by Edimax, Linksys, Sitecom or Thomson (SpeedTouch) respond to UPnP requests on their WAN interfaces.

Since UPnP isn't designed to include any authentication, the XML description can always be retrieved. Garcia said that, by performing an internet scan, he managed to detect 150,000 potentially vulnerable devices within a short period of time. Once initial contact has been made, the scanner sends such UPnP commands as AddPortMapping or DeletePortMapping to the devices via SOAP requests. LAN devices usually use these commands to access the internet via NAT. However, the devices from the manufacturers in question allow the port to be opened ? and redirected to any other LAN device ? via the WAN interface. Umap attempts to guess the internal IP address that is required to do so.

http://www.h-online.com/security/news/item/UPnP-enabled-routers-allow-attacks-on-LANs-1329727.html

Keeping upnp on because it's convenient, and keeping the firewalls on only computers because there's no reason to not have them on.

And overly sensationalist.

What if you were behind a linksys router, had UPnP and had folder shares setup on your network. Then a guy on the net configures your UPnP to allow folder shares accessible on the net?

***WARNING!*** Linksys Routers UPnP is Configurable from the net

disable UPnP immediately!

For some reason this story isn't getting much press. Personally I think this is huge. I had a hard enough time just finding a site that talked about it.

maybe because it's not that big of a deal?

Anyone that has set all their shares to public, is an idiot.

Someone wants to get on my network feel free, you'll get to see that I have shares, but that's it.

The fact a someone on the net can configure your router from the outside and even see your shares should make you feel uneasy. Regardless if they can actually open the shares,

This isn't really a huge deal, because, as it was said before, there are plenty of computers out there not even behind a router. However having your ports open for anyone on the internet isn't a good idea. You could always be caught with a slightly outdated software or exploited with a zero day.

any newb knows not to enable UPnP....</joke>

Joking aside....what a bummer! I mean, I sit behind a netgear router as my primary gateway...a linksys I'm using as a switch...then a linksys I'm using as an access point, with multiple workstations on wifi...even a ps3...and still, don't have to worry about it. Life goes on....(least, for me anyway)

There's probably a large number of people that use Linksys routers with custom firmware. Newer firmware versions have a feature that says "UPnP clients are allowed to add mappings only to their IP". I'd imagine this would protect you from the kind of vulnerability talked about in the article.

Linksys will more than likely fix this in a firmware update. But now many "Average user" upgrade the firmware of their routers?

How many "Average user" also install custom firmware?

So my guess would be we have millions of average users with linksys routers out there that are non the wiser to this issue.

basically what I am getting at is that there are fewer with this issue than you think. Many routers do not enable upnp out of the box....I believe that there are more out there that do not than there are that do. I have run into less than a handful that have had this enabled out of the box. It is the gaming users (xbox, ps3, and possibly the wii users) that have this feature enabled...perhaps being that you have more experiance on the home side than I do in recent years you see different, but I am pretty sure that you have to enable this feature on most or all routers.

basically what I am getting at is that there are fewer with this issue than you think. Many routers do not enable upnp out of the box....I believe that there are more out there that do not than there are that do. I have run into less than a handful that have had this enabled out of the box. It is the gaming users (xbox, ps3, and possibly the wii users) that have this feature enabled...perhaps being that you have more experiance on the home side than I do in recent years you see different, but I am pretty sure that you have to enable this feature on most or all routers.

Having to enable it, doesn't that defeat the purpose it was created for? I can see why home user routers would be on by default, and I could also see why business class routers would have it off by default.

how so? disabled for the majority, if you need it you enable it.

Ya, but they are Made for the 'Home users" Home users barely know where the address bar is, let alone how to log into their router and enable UPnP :cool:

I don't disagree with. If you need it turned on its a VERY easy thing to do. For the the home user, a not such an east thing to do.

Ya, but they are Made for the 'Home users" Home users barely know where the address bar is, let alone how to log into their router and enable UPnP :cool:

very true and that is why you see many routers that have no wireless security and upnp disabled because they kept the defaults.

point being that although it is a flaw, the majority isn't succumed to this flaw being that they don't even know how to get in to it to check it's ip or if it is connected to the internet. the ones who this flaw is subject to are the people who know enough to enable it for whatever reason and should be keeping up on their security and updates.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I can agree that it is being used in a small capacity. I worked for a company where their engineers still used XP, and when asked why it was because their sensor software wasn't compatible with newer operating systems and the software was discontinued so they couldn't upgrade the software. Given that the sensors were still in use by companies, they had to continue using XP to support the sensor, otherwise the price to the company would have gone into the millions or billions. Our response was simple: Ok, you can keep the XP machine. But we're removing it from the network. "But then it can't access the Internet or folder shares!" Yup, kinda the point. If someone wants to continue using an unsecure OS they can do, I have no problem with that. But it should be isolated. Simple. I had a fight with a guy in the engineering department for weeks before he finally relented. But we digress.   What do I plan on doing to commemorate the anniversary? Nothing. I have fond memories of the OS, but at the end of the day it's just an OS. If I had some time I might see if I could install it on my Raspberry Pi for a laugh. But my reflex memory with today's OS ideas would probably get me frustrated and I'd uninstall it after 5 mins.
    • Shutter Encoder 20.2 by Razvan Serea Shutter Encoder is one of the best video converter software and image, audio available today. It has been designed by video editors in order to be as accessible and efficient as possible. It is one of the few free professional tools. Based on FFmpeg, it has the largest codec library available. You can thus convert your files into many different formats. Complete settings for the most advanced Shutter Encoder has a panel containing a large number of settings, in order to define your own choices based on your files and perfect your video or audio output. Well-thought-out settings, with parameters predefined to create files quickly and easily. List of functions Without conversion: Cut without re-encoding, Replace audio, Rewrap, Conform, Merge, Extract, Subtitling, Video inserts Sound conversions: WAV, AIFF, FLAC, MP3, AAC, AC3, OPUS, OGG Editing codecs: DNxHD, DNxHR, Apple ProRes, QT Animation, GoPro CineForm, Uncompressed YUV Output codecs: H.264, H.265, VP9, AV1, OGV Broadcast codecs XDCAM HD422, AVC-Intra 100, XAVC, HAP....and much more. Shutter Encoder 20.2 changelog: Added "Intel Quick Sync" hardware acceleration for Linux Added 'Identify speakers' option for "Audio transcription" function Improved installer package Improved video player performance Improved timecode display with drop-frame videos Improved naming convention for surround audio files Fixed splash screen freeze Fixed bug with file hanging Fixed bugs with presets loading Fixed bugs with video player's buffer Fixed bug with 'Total length of file' option Fixed bugs with 'Record screen/device' option Fixed bug with "XAVC" & "XAVC Long GOP" functions Rollback to XPDF tool for PDF conversion Removed unused binary architecture for Mac Various corrections Various improvements Download: Shutter Encoder 20.2 | 166.0 MB (Open Source) Download: Shutter Encoder Portable | 185.0 MB Links: Shutter Encoder Home Page | FAQ / Tips | macOS | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • did you give it permission to do so? its probably on the ToS. After that South Park episode I'm paying attention to them lol
    • Ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha   No
    • I already have AI "Scareware blocker" on my private profile, it's in "Settings > Privacy, search, and services > Security". I've disabled it because I know what scareware is and don't need AI to tell me.
  • Recent Achievements

    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      534
    2. 2
      +Edouard
      265
    3. 3
      PsYcHoKiLLa
      152
    4. 4
      Steven P.
      99
    5. 5
      macoman
      66
  • Tell a friend

    Love Neowin? Tell a friend!