Some Older Linksys Routers allow UPnP Configurable from the net


Recommended Posts

Some Older Linksys Routers allow UPnP Configurable from

update the firmware or disable UPnP immediately!

Routers from various manufacturers support UPnP (Universal Plug and Play) on their WAN interfaces, which apparently makes it possible for attackers to reconfigure them remotely via the internet and, for example, misuse them as surfing proxies or to infiltrate internal LANs. The problem was discovered by IT security specialist Daniel Garcia, who has developed the Umap tool to demonstrate the problem; the tool is available to download free of charge.

Umap detects UPnP-enabled end devices such as DSL routers and cable modems on the internet by directly retrieving the devices' XML descriptions. The required URLs and ports for some models are hard-coded into the tool. This enables the software to bypass the usual restriction that only allows UPnP to search for compatible hardware via multicast in local networks. Garcia says that entire device series by Edimax, Linksys, Sitecom or Thomson (SpeedTouch) respond to UPnP requests on their WAN interfaces.

Since UPnP isn't designed to include any authentication, the XML description can always be retrieved. Garcia said that, by performing an internet scan, he managed to detect 150,000 potentially vulnerable devices within a short period of time. Once initial contact has been made, the scanner sends such UPnP commands as AddPortMapping or DeletePortMapping to the devices via SOAP requests. LAN devices usually use these commands to access the internet via NAT. However, the devices from the manufacturers in question allow the port to be opened ? and redirected to any other LAN device ? via the WAN interface. Umap attempts to guess the internal IP address that is required to do so.

http://www.h-online.com/security/news/item/UPnP-enabled-routers-allow-attacks-on-LANs-1329727.html

Keeping upnp on because it's convenient, and keeping the firewalls on only computers because there's no reason to not have them on.

And overly sensationalist.

What if you were behind a linksys router, had UPnP and had folder shares setup on your network. Then a guy on the net configures your UPnP to allow folder shares accessible on the net?

***WARNING!*** Linksys Routers UPnP is Configurable from the net

disable UPnP immediately!

For some reason this story isn't getting much press. Personally I think this is huge. I had a hard enough time just finding a site that talked about it.

maybe because it's not that big of a deal?

Anyone that has set all their shares to public, is an idiot.

Someone wants to get on my network feel free, you'll get to see that I have shares, but that's it.

The fact a someone on the net can configure your router from the outside and even see your shares should make you feel uneasy. Regardless if they can actually open the shares,

This isn't really a huge deal, because, as it was said before, there are plenty of computers out there not even behind a router. However having your ports open for anyone on the internet isn't a good idea. You could always be caught with a slightly outdated software or exploited with a zero day.

any newb knows not to enable UPnP....</joke>

Joking aside....what a bummer! I mean, I sit behind a netgear router as my primary gateway...a linksys I'm using as a switch...then a linksys I'm using as an access point, with multiple workstations on wifi...even a ps3...and still, don't have to worry about it. Life goes on....(least, for me anyway)

There's probably a large number of people that use Linksys routers with custom firmware. Newer firmware versions have a feature that says "UPnP clients are allowed to add mappings only to their IP". I'd imagine this would protect you from the kind of vulnerability talked about in the article.

Linksys will more than likely fix this in a firmware update. But now many "Average user" upgrade the firmware of their routers?

How many "Average user" also install custom firmware?

So my guess would be we have millions of average users with linksys routers out there that are non the wiser to this issue.

basically what I am getting at is that there are fewer with this issue than you think. Many routers do not enable upnp out of the box....I believe that there are more out there that do not than there are that do. I have run into less than a handful that have had this enabled out of the box. It is the gaming users (xbox, ps3, and possibly the wii users) that have this feature enabled...perhaps being that you have more experiance on the home side than I do in recent years you see different, but I am pretty sure that you have to enable this feature on most or all routers.

basically what I am getting at is that there are fewer with this issue than you think. Many routers do not enable upnp out of the box....I believe that there are more out there that do not than there are that do. I have run into less than a handful that have had this enabled out of the box. It is the gaming users (xbox, ps3, and possibly the wii users) that have this feature enabled...perhaps being that you have more experiance on the home side than I do in recent years you see different, but I am pretty sure that you have to enable this feature on most or all routers.

Having to enable it, doesn't that defeat the purpose it was created for? I can see why home user routers would be on by default, and I could also see why business class routers would have it off by default.

how so? disabled for the majority, if you need it you enable it.

Ya, but they are Made for the 'Home users" Home users barely know where the address bar is, let alone how to log into their router and enable UPnP :cool:

I don't disagree with. If you need it turned on its a VERY easy thing to do. For the the home user, a not such an east thing to do.

Ya, but they are Made for the 'Home users" Home users barely know where the address bar is, let alone how to log into their router and enable UPnP :cool:

very true and that is why you see many routers that have no wireless security and upnp disabled because they kept the defaults.

point being that although it is a flaw, the majority isn't succumed to this flaw being that they don't even know how to get in to it to check it's ip or if it is connected to the internet. the ones who this flaw is subject to are the people who know enough to enable it for whatever reason and should be keeping up on their security and updates.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • TCL's Bang & Olufsen soundbar is 40% off on Amazon by Ivan Jenic The TCL Design Series A65K is currently $299.99, down from $499.99. That's 40% off and $200 saved on a soundbar tuned by Bang & Olufsen, which is not a combination you'd normally expect at this price point (purchase link below). Bang & Olufsen doesn't typically show up in the sub-$500 category. The Danish audio brand is known for speakers that cost several times more, so having their acoustic tuning on a $300 soundbar is very appealing. TCL handles the hardware, B&O handles the sound engineering, and the result is what the company calls "accessible luxury." Still, accessible luxury isn’t full-fledged luxury, so don’t expect wonders. But this is a decent soundbar, nevertheless. The A65K is a true 3.1.2 channel system with nine physical drivers, including genuine up-firing height speakers for Dolby Atmos and DTS:X. Many soundbars at this price simulate overhead effects through virtual processing, rather than actual hardware. So, you’re getting the real deal. The design is unusually slim for a system with Atmos compatibility. The bar is just under 2 inches deep and should fit beneath most TV screens. The wireless subwoofer is also compact at roughly 14 x 14 x 5 inches. Total output is 460W, and you can connect to the soundbar via HDMI eARC, Bluetooth 5.3, or USB. There are also eight sound modes through the TCL Home app and an AI calibration capability. Although it’s worth mentioning that AI capabilities in most of these devices are inconsistent, to say the least, and that shouldn’t be the biggest selling point. Still, at $299.99, the A65K is a strong buy for anyone who wants a soundbar that sounds and looks noticeably better than what this price range usually offers. And the Bang & Olufsen branding surely sounds nice - pun intended. TCL Design Series Bang & Olufsen A65K - $299.99 | 40% off on Amazon Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • And he paid Joe Rogan $30M for podcasts. Terrible company.
    • I sure hope the AI does not give out wrong info during education
    • That is $130 more than I paid for my 4TB a year ago. How is this a deal?
  • Recent Achievements

    • Apprentice
      jahara21 went up a rank
      Apprentice
    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
  • Popular Contributors

    1. 1
      +primortal
      530
    2. 2
      +Edouard
      264
    3. 3
      PsYcHoKiLLa
      149
    4. 4
      Steven P.
      98
    5. 5
      macoman
      60
  • Tell a friend

    Love Neowin? Tell a friend!