Recommended Posts

I have used my WRT610N for months without reboots but to save power, I turn off the router when I and all my devices sleep at night. :)

For those in the US who might be wondering, some countries have on/off switches for AC power plugs. Heard US doesn't have them? You just "plug and play"?

System Up Time : 97 Days 6 Hours 33 Minutes 38 Seconds (Now : Tue Feb 21 2012 14:44:37)

This is from the work router - RV082 v3, think that's the actual time it was last upgraded to the latest build for IPv6 and another HTTPs patch that was annoying us. Also the dual-WAN portion i think got some tweak or something. Eitherway, haven't needed to change anything just yet.

Which router? Have access to hundreds of them ;)

Here are couple that have been on a while ;)

uptime is 2 years, 8 weeks, 3 days, 9 hours, 40 minutes

System returned to ROM by power-on

System restarted at 22:27:50 est Wed Dec 23 2009

uptime is 2 years, 37 weeks, 1 day, 5 hours, 55 minutes

System returned to ROM by power-on

System restarted at 10:25:26 EDT Sat Jun 6 2009

  • 8 months later...

Router (Netgear WGR614):System Up Time 17 days 13:26:15 ( think it rebooted itself....) That's not good... I had it on for months...

Wifi Access Point (Amped Wireless AP20000G): 18day:16h:59m:46s

Re-arranged my setup the other day when I was hooking up my new external hard drive to the server. Before this it had been on for about a month or so.

Firmware: DD-WRT v24-sp2 (10/10/09) micro

Time: 21:15:56 up 2 days, 3:40, load average: 0.68, 0.42, 0.18

I set my router to reboot every Sunday just to keep things smooth. I randomly get an issue where my Xbox 360 couldn't connect to the internet, this weekly reboot seemed to stop that. I am selling my Xbox soon so might turn off the weekly reboots, to be honest it don't affect much as its like 4am on Sunday so might keep it!

Probably 3 days or something as we had Hurricane Sandy the other week, power was out longer than UPS could handle too but since it came back i've been playing with upgrades/updates for devices since my uptime was lost anyways :D

Before that however it was like close to 200 days or something.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • You do you, I've just said that it first appeared in "home" version before it will be available in "work" one. I use Edge only because it still supports MV2 uBO extension even on Android - I'll switch when they stop.
    • I imagine that was a review or something? My reviews mostly contain a lot of images and galleries, but these are all webp too, but yeah it all adds up on the page load. Would help if you were more helpful with your critique instead of bitching and moaning like a Karen 😂 Because then we might be able to fix it for you.
    • If Valve refused to let them make the case, I wonder if they've already partnered with someone else to do it? The fact that they didn't seek permission/licence before diving straight in is incredible though
    • OpenClaw now has native mobile apps on iOS and Android by Karthik Mudaliar OpenClaw, the viral open-source personal AI agent, now has its own mobile app, available on both Android and iOS. Users can pair the app with an existing OpenClaw gateway and can start using new mobile-native features that are now available on the app. The app supports all the existing features you'd already have seen on OpenClaw's TUI, as well as some more, such as real-time and background Talk mode, action approvals, sharing from iOS, and optional access to device capabilities such as camera, screen, location, photos, contacts, calendar, and reminders. These features are available on both the Android and iOS versions of the app. What's important with these apps is that they don't run OpenClaw on your phone, but are actually just companion apps that require a running OpenClaw Gateway on an existing device, on macOS, Linux, or Windows via WSL2. To pair the app with your existing OpenClaw gateway, users need to run the command "/pair qr" on the TUI or existing chat interface, which brings up a QR code. Users can then scan this QR code to pair it up with the mobile app. There's also an option to manually pair the app by entering the host and a port. Previously, OpenClaw had been available on phones via WhatsApp, Telegram, Slack, Discord, Microsoft Teams, Matrix, and others. Now, with a native mobile app, the interface is much cleaner and more focused on just the OpenClaw, of course, with the added support for camera, screen, location, and more. It's important to note that OpenClaw comes with its own security warnings. There's always a chance of prompt injection with these tools, so users are recommended to double-check authentication, tool policy, sandboxing, and execution approvals rather than prompts alone. For users well-versed with the AI harness, a native mobile app makes it easier to approve an automation, share a link, use voice, or let an agent react to phone-side context.
  • Recent Achievements

    • First Post
      rosiecharles earned a badge
      First Post
    • Reacting Well
      Juan Dela earned a badge
      Reacting Well
    • Week One Done
      Collagen Project earned a badge
      Week One Done
    • Reacting Well
      Wakeen1966 earned a badge
      Reacting Well
    • Rookie
      Almohandis went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      515
    2. 2
      +Edouard
      273
    3. 3
      PsYcHoKiLLa
      143
    4. 4
      Steven P.
      100
    5. 5
      macoman
      54
  • Tell a friend

    Love Neowin? Tell a friend!