Thinking of switching to AT&T Uverse for Internet


Recommended Posts

I thinking of switching to AT&T Uverse as it will be cheaper then what I am currently paying Comcast. Has anyone had any experience with uVerse? I am being offered the 12 mb/s connection which is equal to what I have with Comcast. I would be paying $85 +taxes /month for a year, which beats Comcast which is charging me $75 /month for internet and TV.

How is $85 a month cheaper than $75 a month?

I have directv for my TV, and only pay comcast for internet. So I can not really compare my prices to yours. But I get 20 down / 2 up with 25/4 burst and I only pay $48.95

I don't even show them offering a 12Mb plan -- performance is 20/4 and blast is 30/6 -- starter is like 6/1 and economy is 3/768k.. Then they have plans with 50 and 105, etc.

Maybe its different in FL? But again not understanding how 85 is cheaper than 75 ;)

I have Comcast and I love it! They got me a special deal for the 20 meg plan and it is fast as far as I can see. I do not like ATT so I stay far away!

Comcast is $75 /month phone is $35 /month so we are at $110 /month where we would be paying $85 /month for AT&T

When was the last time you ran a promo from comcast?? Seems like a lot more than what most people I know pay (northeast florida). Are you on the economy voice package? or the standard? In regards to uverse, I've heard mix results on service.. . if you need more info, i'll ask for you.

Best bet, if you already have the 3x bundle look into the anyroom service that should put you on a years promo, just make sure you roll back when it's done.

I have the 12 mb/s connection through Uverse and I couldn't be happier.

Comcast isn't in my area so my only other alternative is Cox Communications. (N)

I've had Uverse for 3 years and I get a consistent 12 mb/s and never had an outage whether there are storms or not. When I had Cox, there were outages all the time.

^My wife does not want VOIP, despite my reassuring her that its fine. We currently have local/long distance with AT&T ~$35 /month and Internet/TV with Comcast which is currently running $75 /month and the speed has been lagging lately, and since we live in an apartment the node is shared with everyone else who has service, so it's never consistent speed.

I guess it's not bad, my friend had U-Verse. I've had it too and even used to sell it but i'd never switch from my cable connection to that. For you speeds are lower so you don't really care but since they can't offer more than 24/3Mbps it's a no-go for me. I have 50/8Mbps now which U-Verse can't touch, even when they dream :)

As for the service itself though, it worked just fine. Seems my friend however had issues with billing but that could just be a special case. I used it at her house and it's fine, i just hate their required routers too but I love the fact that the boxes can be all networked instead of coaxial cable :) I ran everything over LAN in her house and they offer WIFI options now.

Trust me as a former AT&T employee, it will be the biggest headache of your life. Stick what what you have, it's not worth the hassle I promise. Especially in Florida, 98% of the calls I got were from there and people just hated it. Installed incorrectly, promised service but never got it, inconsistent connection and speeds and numerous billing problems.

Trust me as a former AT&T employee, it will be the biggest headache of your life. Stick what what you have, it's not worth the hassle I promise.

Care to explain what you mean?

Never had a problem with Uverse here. Speed always comes through as advertised and is a better deal than Comcast in my area. The installer was also very good considering what he had to do to run my cable. I'm surprised I wasn't charged extra. TV picture looks great, probably not quite as good as DirecTV but definitely better than I got through cable.

If I wanted 50mbps+ internet, I'd probably get Comcast, but their installers here are so terrible that I wouldn't want to risk having holes punched all over my walls.

Trust me as a former AT&T employee, it will be the biggest headache of your life. Stick what what you have, it's not worth the hassle I promise. Especially in Florida, 98% of the calls I got were from there and people just hated it. Installed incorrectly, promised service but never got it, inconsistent connection and speeds and numerous billing problems.

And as a current AT&T employee, I second this. Crappy ping, inconsistant internet speeds, awful customer support, etc...

the speed has been lagging lately, and since we live in an apartment the node is shared with everyone else who has service, so it's never consistent speed.

IDK Man... It shouldn't just start lagging. Those nodes are designed from the get-go to handle the load of that complex(just as the ones that feed any other complex or neighborhood). I would suspect that you have some type of noise issue or line problem going on, espeically with all the freaking rain we have been having.... Report it(intermittent connectivity issues), and have them come out. If it doesn't fix the problem, report it again until it does. Once it becomes escallated they will do something about it..... either based on reimbursments or by fixing the issue entierly. Either way, nothing will happen until you do that..

Also, while speeds are strained during peak times, it should still stay a pretty consistent expierience(not gradually getting worse). Remember that just because your apartment is good-to-go, the kid on the first level may have thought it was a good idea to electrical-tape together some cable instead of buying a splitter and is screwing the whole complex up...

I only bring that up because when I lived in maryland this guy did something similiar in my building.. so I called and complaiend for about a month until they figured it out! Ever since they had done that my service was perfect (also got a credit on my bill yup yup)....

Well Comcast decided to lower the bill back to the level it was at before! Now the issue I have is according to Comcast, I'm supposed to be on a 20 megabit connection, however, after running a series of Speedtests, the highest speed I obtained was ~14, with an over all average of approx 11. I plan on checking this again in the morning and calling them if the issue persists!

You sure its not just say a limit because of your router -- what router do you have.. Some older models just can not pump out move that low teens.

This could be true. I know my very old linksys router couldn't pump it. Got an N router with n adapters and all was well again.

I am happy with my u-verse install. I got the 24/3 Max Turbo plan for a promotional price of $45/month. I speedtest at those speeds, download at about 3MB/s.

The only downside is the router / gateway is provided by them. No matter what you do, since there is no true bridge mode, you will be limited to that. It has a limit of 1024 NAT sessions.

I have U-verse for Internet and TV. The TV service is great. I have a wireless box in the living room. Internet is great as well. I have 24mbps down and it's always consistent. Never had an outage.

HOWEVER, depending on where you are located you may get terrible TV service. I don't know the details of the tech they use differently from location to location, but I can tell you positively they will install the service even if it will be terrible. Like I said, I have U-verse and it's installed optimally. Some family a couple miles down also have U-verse and they installed it completely differently. I have IP-TV in my house but they require Coaxial because of the type of cabling they had to run to the house - it can't support the bandwidth.

Also, ping times are lower and I have weird disconnects on some online games at times.

Honestly, it's the TV service being great and bundling with wireless phones that keeps me with them. I'd probably get Comcast otherwise.

I am happy with my u-verse install. I got the 24/3 Max Turbo plan for a promotional price of $45/month. I speedtest at those speeds, download at about 3MB/s.

The only downside is the router / gateway is provided by them. No matter what you do, since there is no true bridge mode, you will be limited to that. It has a limit of 1024 NAT sessions.

Ah yes, and there is this. The router they provide sucks and you need to use it :/ I have a group of static IPs though which allows me to alleviate their router as much as possible and direct all traffic to mine.

You sure its not just say a limit because of your router -- what router do you have.. Some older models just can not pump out move that low teens.

Netgear WNDR 3300, so I am sure it's not the router

This topic is now closed to further replies.
  • Posts

    • OpenClaw now has native mobile apps on iOS and Android by Karthik Mudaliar OpenClaw, the viral open-source personal AI agent, now has its own mobile app, available on both Android and iOS. Users can pair the app with an existing OpenClaw gateway and can start using new mobile-native features that are now available on the app. The app supports all the existing features you'd already have seen on OpenClaw's TUI, as well as some more, such as real-time and background Talk mode, action approvals, sharing from iOS, and optional access to device capabilities such as camera, screen, location, photos, contacts, calendar, and reminders. These features are available on both the Android and iOS versions of the app. What's important with these apps is that they don't run OpenClaw on your phone, but are actually just companion apps that require a running OpenClaw Gateway on an existing device, on macOS, Linux, or Windows via WSL2. To pair the app with your existing OpenClaw gateway, users need to run the command "/pair qr" on the TUI or existing chat interface, which brings up a QR code. Users can then scan this QR code to pair it up with the mobile app. There's also an option to manually pair the app by entering the host and a port. Previously, OpenClaw had been available on phones via WhatsApp, Telegram, Slack, Discord, Microsoft Teams, Matrix, and others. Now, with a native mobile app, the interface is much cleaner and more focused on just the OpenClaw, of course, with the added support for camera, screen, location, and more. It's important to note that OpenClaw comes with its own security warnings. There's always a chance of prompt injection with these tools, so users are recommended to double-check authentication, tool policy, sandboxing, and execution approvals rather than prompts alone. For users well-versed with the AI harness, a native mobile app makes it easier to approve an automation, share a link, use voice, or let an agent react to phone-side context.
    • Google pitches Spanner as one database for all AI agents with these new featues by Karthik Mudaliar Google Cloud is introducing new features within Spanner, its distributed database, as a place where enterprises should keep their data, using which AI agents could make smarter and better decisions. In a detailed blog post, Google highlighted quite a few features coming to Spanner, including relational data, graph relationships, vector search, key-value access, full-text search, and operational analytics together in one database architecture. Google says that today's systems aren't well-made for AI agents. There could be data that is present in one system, search indexes in another, embeddings in a vector database, and relationship data in a graph database. This fragmentation isn't great for AI agents to do their jobs because they don't have access to all of this data in one place. This is where Google is positioning Spanner as a solution. Spanner is already a globally distributed relational database with strong consistency, and Google wants its customers to see it as a broader data layer for AI applications. The company introduced something called Spanner Graph, along with integrated vector search, full-text search, a Cassandra-compatible key-value endpoint, and a columnar engine for analytical queries on operational data. Google also added that its ScaNN-powered vector search can support indexes with more than 10 billion vectors, while the columnar engine can make some analytical scans up to 200 times faster. All of this isn't just exclusive to the Google Cloud Platform, and there's support for multi-cloud as well. This comes via Spanner Omni, which Google says is a downloadable, containerized version of Spanner that can run on Kubernetes and in environments outside Google Cloud, including Microsoft Azure and AWS, and even on-premises infrastructure as well as edge deployments. Google says that customers who are interested in the full-featured edition should contact the company, and there's no word on commercial availability or separate pricing. Those interested can read the full blog by Google Cloud, which details these features individually.
    • Kalmuri 4.2.5 by Razvan Serea Kalmuri is your all-in-one, portable screen capture and recording solution designed for speed, simplicity, and flexibility. Whether you need a full-screen snapshot, a custom area, a scrolling webpage, or smooth video recording, Kalmuri delivers with ease. Capture text instantly from images with built-in OCR, keep floating images on top for quick reference, and use the precise color picker for perfect design matching. Customize hotkeys to work your way and share results instantly with built-in upload options. Kalmuri runs without installation, making it ideal for USB use, and offers an intuitive interface that’s easy to learn. Kalmuri key features: Video recording support (designation of whole screen and area) Whole screen, active program, window control, area application Extract text from images using optical character recognition (OCR). Support for PNG, JPG, WEBP, BMP, GIF file formats MP4 video recording powered by FFmpeg for high-quality results Full web page capture Share the captured image on the web Color extraction function Printer output Hotkey settings Adjustable via keyboard for area capture (Arrow key, Ctrl+Arrow key, Shift+Arrow key) File name format (sequential, datetime) Free to use it at work, at home, in government offices, at school, etc. Using Kalmuri portable for video recording Kalmuri’s portable version doesn’t include FFmpeg, which is required for video recording. Without it, you’ll get an “error FFmpeg.exe not found” message. To fix this, download FFmpeg from the provided link, extract it, and place FFmpeg.exe in Kalmuri’s folder. Kalmuri will then recognize it automatically, allowing you to start recording in high quality instantly. Kalmuri 4.2.5 changelog: Fixed an intermittent crash when using Area Capture Improved stability for Area Capture and screen recording Resolved a capture issue that could occur right after startup Download: Kalmuri 4.2.5 | 24.2 MB (Freeware) Download: Kalmuri Portable 4.2.5 | 2.1 MB View: Kalmuri Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • They have lots of info on me, I have a facebook account and have done so for years, it was the thing to have then. My phone number is not on it. I don't have the Facebook app on my phone these days, just the messenger part, and only for a couple of people to contact me, most will text me via SMS or phone. I agree, Meta, like others, even without an account will know something about me. Just have to try and keep some things private Also, never saw the need for Whatsapp, people used to ask for me to join it, but as I said to them, I have SMS and a phone, use that, or email
  • Recent Achievements

    • First Post
      rosiecharles earned a badge
      First Post
    • Reacting Well
      Juan Dela earned a badge
      Reacting Well
    • Week One Done
      Collagen Project earned a badge
      Week One Done
    • Reacting Well
      Wakeen1966 earned a badge
      Reacting Well
    • Rookie
      Almohandis went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      516
    2. 2
      +Edouard
      273
    3. 3
      PsYcHoKiLLa
      143
    4. 4
      Steven P.
      98
    5. 5
      macoman
      54
  • Tell a friend

    Love Neowin? Tell a friend!