Recommended Posts

So, I had Windows 8 blow up in my face yesterday. Still not sure what happened or what caused it, but the test system self destructed forcing me to do a disk scan and "Refresh" (More on that later). Everything is back to working order, however Windows 8 is and isn't connected to my network... I'm not sure what's going on here, but I have Windows telling me it is, but isn't connecting to my Ethernet LAN. I tried IPConfig, reseating my NIC, and re-installing the drivers to no avail. Any ideas?

Link to comment
https://www.neowin.net/forum/topic/1089367-windows-8-network-adapter-troubles/
Share on other sites

I'd do a reinstall. If you system "self destructed" it is likely something got corrupted.

If you did an ipconfig /release and a rewnew, did a /flushdns , reinstalled your drivers, tried resetting the nic, and are indeed getting a valid IP from your ISP or router, I am not sure what else you can try.

Well, at this point, a re-install would be more trouble than it's worth. If there's nothing else I can do, it would be more worthwhile to blow the installation away and use it for storage. :/

What exactly were your issues before, what was the symptom of "self destruct".

Try manually assigning all parameters of the connection. Manually assign the ip, gateway and dns servers.

There were no symptoms. I had to restart my machine so I could boot into Windows 7, and when I booted back into Windows 8, nothing worked, nothing started, and Windows was telling me my drive needed scanned for errors.

what's the IP address that gets assigned to it? is it in your expected range?

192.168.1.2.

have you tried a system restore? I don't know if it would help much more then your system refresh did, but it's worth a try.

I cannot for the life of me find System Restore anymore. I think (Don't quote me on this though) that the new "Refresh your PC" feature replaces system restore. But get this, it totally reformats your system and removes your x64 apps. :angry: However, it did nothing for my issue, and left me with a even more busted Windows 8 installation.

I cannot for the life of me find System Restore anymore. I think (Don't quote me on this though) that the new "Refresh your PC" feature replaces system restore. But get this, it totally reformats your system and removes your x64 apps. :angry: However, it did nothing for my issue, and left me with a even more busted Windows 8 installation.

ouch...

System Restore is still there, search for "System Restore" on your Start Menu, then go to Settings and click "Create a restore point." then click the button that says "System Restore..." :p

ouch...

System Restore is still there, search for "System Restore" on your Start Menu, then go to Settings and click "Create a restore point." then click the button that says "System Restore..." :p

Well this sucks. I have ZERO restore points! Why the **** is Windows 8 not making restore points automatically?

Well this sucks. I have ZERO restore points! Why the **** is Windows 8 not making restore points automatically?

yeah, I've noticed this ever since the DP...it seems to be some kind of space saving feature -.- in the DP or CP (I don't remember which one) even to get to system restore you had to enable it in the add/remove windows features window. oh well, there goes my only suggestion :\

I'm sorry to say this but you lost your restore points at the refresh. Windows 8 does create restore points when you add or remove software (I have several and I've never changed a restore setting)

Unfortunately, it seems "refresh" is the default answer to fix people's Windows 8 PCs. If you ask a question on the forums about Windows 8 problem, you're going to get told to refresh the PC. That's great for your metro apps, which will automatically reinstall, but desktop apps get wiped, with little warning (other than a "Your apps will be removed)

Windows 8 does create restore points when you add or remove software (I have several and I've never changed a restore setting)

I don't have any pointers to fix your network adapter, I'm sorry to say :-\

What IP address are you getting?

check to see if Windows 8 is still installed on C drive, if the bootloader has messed up then it can cause problems like you are having

The OS isn't going to automagically change which drive is installed on, and if it did it wouldn't boot at all. Especially if the boot loader is messed up like you are thinking.

The OS isn't going to automagically change which drive is installed on, and if it did it wouldn't boot at all. Especially if the boot loader is messed up like you are thinking.

i have seen this happen a few times to be sure. windows makes a small hidden partition in front of the main OS partition, for whatever reason sometimes that hidden partition can become unhidden and C drive. yes most of the time it will just blue screen on boot if this happens but sometimes it will boot to windows just with lots of problems.

check to see if Windows 8 is still installed on C drive, if the bootloader has messed up then it can cause problems like you are having

I can boot into it no problem. It recognizes all my drives, but it just has trouble with going online to some sites. Metro apps don't even work at all.

I'm sorry to say this but you lost your restore points at the refresh. Windows 8 does create restore points when you add or remove software (I have several and I've never changed a restore setting)

Unfortunately, it seems "refresh" is the default answer to fix people's Windows 8 PCs. If you ask a question on the forums about Windows 8 problem, you're going to get told to refresh the PC. That's great for your metro apps, which will automatically reinstall, but desktop apps get wiped, with little warning (other than a "Your apps will be removed)

Windows 8 does create restore points when you add or remove software (I have several and I've never changed a restore setting)

I don't have any pointers to fix your network adapter, I'm sorry to say :-\

What IP address are you getting?

ah, this is good to know :D yeah, I'm pretty unhappy with how now the default answer to all Windows problems is "try a Refresh" (which is replacing the slightly less destroying Reboot answer :p)

can you ping your gateway?

Seriously surprised it took this long for someone to mention that...

Can you post the results of these commands...

ping 192.168.2.1

ipconfig /all (from Windows 8 and Windows 7)

route -print (from Windows 8 and Windows 7)

Also, have you installed an AntiVirus or Firewall? And have you tried to disable your firewall to see if that makes any change?

can you ping your gateway?

Seriously surprised it took this long for someone to mention that...

Can you post the results of these commands...

ping 192.168.2.1

ipconfig /all (from Windows 8 and Windows 7)

route -print (from Windows 8 and Windows 7)

Also, have you installed an AntiVirus or Firewall? And have you tried to disable your firewall to see if that makes any change?

Too late. I found myself with some extra time and forced myself into a re-install. I'm assuming since I had partial Internet connectivity that I could ping my gateway, but I never bothered trying. I know I did do a IPCONFIG /RELEASE and IPCONFIG /RENEW.

OK ... I appear to be having a very similar problem to the one Dot Matrix has been experiencing, and it's only just kicked in

this evening. Ironically, on the very day that thousands of internet connections are due to go belly up because of the FBI

throwing the kill switch on the DNS servers they seized from the DNSChanger malware muppets!

I don't want to have to refresh/reset/reinstall Windows unless all possible solutions are tried and don't resolve the issue.

The situation is this ... my main OS on my main PC is Windows 8 Release Preview, on a dual boot, alongside Windows XP.

The internet, and all network connections on my media centre PC downstairs are fine. The same goes for our webserver.

All three computers (and my XBox360) are set to static IP rather than DHCP. The router is on 198.168.1.1, my main PC

is on 198.168.1.3, the webserver is on 198.168.1.4, and the media centre PC is on 198.168.1.7.

The network settings on the main PC:

IP address: 198.168.1.3

Subnet mask: 255.255.255.0

Default Gateway: 198.168.1.1

Preferred DNS server: 198.168.1.4

Alternative DNS server: 198.168.1.1

These settings have always worked with no problems, adverse or otherwise, ever since they were first setup.

Now ... the network connection with Windows 8 on the main PC is live, and says there is internet access. Indeed, the Activity

section of the connection status window, shows data is being sent and received. I can access all the shared folders on the

other computers on the network from the main PC, and can access them via Remote Desktop Connection.

Yet not one single web browser or internet application on this install of Windows 8 can get any internet action!

With the Windows XP installation on the main PC, no problem. All systems go. Full, unfettered, internet access.

I could, for the time being drop back to Windows XP for a while. While it does work fine for such a long in the tooth OS,

it is still very old, and to be honest, I do prefer Windows 8 ... much like quite a few other folks around here.

Guys, on a side note if you're not using 3rd party DNS server(s) - you should start.

Whether it is Google's (8.8.8.8) & (8.8.4.4) or OpenDNS (208.67.222.222) & (208.67.220.220)

There are DNS testing utilities that can tell you what the fastest ones are for your specific connection also.

This topic is now closed to further replies.
  • Posts

    • Apple Watch Series 11 GPS just crashed to 30% off in this fast-moving Prime Day deal by Karthik Mudaliar The Apple Watch Series 11 is available for $279, down from its $399 list price, saving buyers $120, or 30%. Amazon labels the offer as selling fast, so the current price may not remain available for long. This GPS model features a 42mm aluminum case, an Always-On Retina LTPO3 OLED display capable of reaching up to 2,000 nits, and an Ion-X glass surface with improved scratch resistance. Apple rates Series 11 for up to 24 hours of normal use or up to 38 hours in Low Power Mode, with fast charging providing up to eight hours of use from a 15-minute charge. Health and fitness tools include sleep scoring, temperature sensing, ECG support, heart-rate alerts, workout tracking, sleep apnea notifications, and hypertension notifications, where available. The watch also carries IP6X dust resistance and 50-meter water resistance. This configuration is best suited to iPhone owners who want comprehensive health tracking, notifications, contactless payments, and workout data without stepping up to a larger or cellular-equipped model. The smaller case should also appeal to buyers who prefer a lighter watch, while the S/M band fits wrists measuring 130mm to 180mm. With the current generation now significantly below its usual retail price, this is a strong time to replace an aging Apple Watch or buy a first model without compromising on Apple’s newest health and display features. Grab the discounted Apple Watch Series 11 (sold and shipped by Amazon) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • The laptop in the bedroom is an Acer with i7-10510U CPU. Acer's website states they will not be upgrading it so I had little choice other than disable secure boot. I know next to nothing on these matters so hopefully it will be fine.
    • GitHub removes manual model selection from Copilot free and student plans by Karthik Mudaliar GitHub is removing the ability to manually select an AI model from its Copilot Free and Student plans, making its automatic routing system the default and only way to choose a model. This means users on these tiers will no longer be able to deliberately select a particular OpenAI, Anthropic, Google, or Microsoft model for a task. In its announcement, GitHub said Copilot Auto will dynamically choose what it considers the best model for each request. Free and Student accounts will retain access to models from multiple families, although the available selection will continue to depend on the restrictions attached to each plan. GitHub did not identify a fixed pool of models that Auto will always use, and its documentation warns that model availability can change over time. GitHub describes Auto as more than a random fallback system. On supported surfaces, its task-optimization technology evaluates the complexity of a request alongside real-time information about model health and availability. Straightforward prompts can be routed to faster and less expensive models, while more demanding coding tasks may be sent to higher-cost reasoning models. The company says this approach should reduce rate limiting, latency, and failed requests. Auto generally selects one model along natural prompt-caching boundaries rather than repeatedly switching models during a session, as GitHub found that mid-session changes increased costs without producing sufficient improvements in output quality. Users can still check which model generated a response. In Copilot Chat, the information appears when hovering over an answer, while Copilot CLI and the Copilot cloud agent display the selected model alongside their output. Auto is available in Copilot Chat, Copilot CLI, and the cloud agent, with the exact implementation and release status varying between supported development environments. The latest restriction follows several months of adjustments to Copilot’s individual plans. GitHub temporarily halted new Pro, Pro+, and Student subscriptions in April as it sought to manage demand and service reliability. It later introduced token-based billing and began gradually reopening individual-plan registrations on June 17. Alongside the picker change, GitHub is retiring the “Preview” label from Microsoft-developed models. It argues that the label is no longer necessary because Auto handles model routing and models are continuously updated behind the scenes.
    • Look up 'inflation' kid. Ask an AI for the numbers between both games.
  • Recent Achievements

    • One Year In
      Philsl earned a badge
      One Year In
    • Dedicated
      Scoobystu earned a badge
      Dedicated
    • First Post
      Tom Schmidt earned a badge
      First Post
    • One Month Later
      D0nn13 earned a badge
      One Month Later
    • Rookie
      +ChiefOfNeo went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      461
    2. 2
      +Edouard
      177
    3. 3
      PsYcHoKiLLa
      124
    4. 4
      Michael Scrip
      79
    5. 5
      Xenon
      76
  • Tell a friend

    Love Neowin? Tell a friend!