Recommended Posts

Tomato is the way to go, i was a big fan of DD-WRT for a couple of years however switched to Tomato in 2008 and never looked back.

It's running rock sold on my Asus RT-N16 and copes with my recently upgraded 100mbit internet with ease.

Got my router running IPV6 & Open VPN, plus updating a domain in-case my IP ever changes.

IPV6:

24xm8mg.png

Open VPN:

nn5t8n.png

I also quite like how you can check your bandwidth usage history:

novzic.png

It can even act as a print server / nas, although i have a server for tasks like that. It will probably handle and networking related task you wish to do at home with ease anyway (Y)

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/#findComment-595040855
Share on other sites

DD-WRT is still very much alive, many updates this year alone, they just haven't updated the main router database for ages so the builds it finds for your router are ancient

New builds are on the FTP here

ftp://ftp.dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/2012/

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/#findComment-595051559
Share on other sites

:angry: Just decided to give OpenWRT a try and bricked my WRT160NL

Time to dig out the old RS232 TTL again

Note to self: You like DD-WRT and DD-WRT likes you, DO NOT flash alternate firmware ever again.

--

That took far too long to remember the TFTP commands to unbrick

For future reference (when I brick it next time)

PuTTY > update code.bin > command prompt > tftp -i 192.168.1.1 put code.bin

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/#findComment-595052259
Share on other sites

I've got v.1 the broadcom chipset.

Can't see it on their list, but if its anything like DD-WRTs list it might not have been updated

Are you running a custom firmware now ?

DD-WRT is supported

ftp://ftp.dd-wrt.com...19519/broadcom/

Instructions

http://www.dd-wrt.com/wiki/index.php/Linksys_WRT350N

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/#findComment-595052379
Share on other sites

DD-WRT is clunky. I tried both the latest and stable builds and it was shaving off 30Mbps from my maximum connection speed. Their team seems to be sitting back counting donations giving people false hope of their new router being supported. I even sent them a couple routers to them in Germany and here we are a year later and still no word back from them or support for the routers I sent.

I decided to give Tomato a go and never really looked back since.

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/#findComment-595052393
Share on other sites

Can't see it on their list, but if its anything like DD-WRTs list it might not have been updated

Are you running a custom firmware now ?

DD-WRT is supported

ftp://ftp.dd-wrt.com...19519/broadcom/

Instructions

http://www.dd-wrt.co...Linksys_WRT350N

Yea actually runnin the most recent build from 7/20 i wanted to try Tomato to see if it's better but i want to be sure its supported.

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/#findComment-595052399
Share on other sites

I've always been a DD-WRT user and still want to be but the support for my E4200 and newer features (Broadcom in general) seems to be lacking lately. I still checked even now after seeing this thread to see what's been going on and still slow/nothing. I slapped Tomato USB Toastman build on there recently and that thing is flying with more features working than what was offered with DD-WRT. I definitely get faster WLAN to LAN speeds as i've copied files and done tests and it's a big difference, I'd see 12MB/s LAN to WLAN but now that's 30MB/s! WLAN to LAN was always in the 25MB/s range but now that's also 30MB/s :)

IPv6 stuff for those that care or have it (mainly Comcast in the USA) will know that it works too and works great i'm told. DD-WRT doesn't have IPv6 support really, definitely not DHCPv6-PD!

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/#findComment-595052809
Share on other sites

I've always been a DD-WRT user and still want to be but the support for my E4200 and newer features (Broadcom in general) seems to be lacking lately. I still checked even now after seeing this thread to see what's been going on and still slow/nothing. I slapped Tomato USB Toastman build on there recently and that thing is flying with more features working than what was offered with DD-WRT. I definitely get faster WLAN to LAN speeds as i've copied files and done tests and it's a big difference, I'd see 12MB/s LAN to WLAN but now that's 30MB/s! WLAN to LAN was always in the 25MB/s range but now that's also 30MB/s :)

IPv6 stuff for those that care or have it (mainly Comcast in the USA) will know that it works too and works great i'm told. DD-WRT doesn't have IPv6 support really, definitely not DHCPv6-PD!

Yea for them being at sp2 i would expect more features to be implemented. They support a wide range of routers but feature wise they need to be updating them and making them stable... seems like Tomato is similar in that department..not a lot of motivation to really push for updated better features.

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/#findComment-595052883
Share on other sites

Mine is from 1/12/08 if it works why worry. I haven't rebooted or had a problem since forever.

Same here, I haven't rebooted mine since I installed DD-WRT (2 years or a little more), but I guess I am gonna have to do so, I lost the password which is never happened before. lol

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/#findComment-595057663
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • FotoSketcher Studio 4.30 by Razvan Serea FotoSketcher Studio is a free creative tool that instantly turns your photos into artwork. With just a few clicks, you can apply styles like pencil sketches, watercolor, oil painting, ink drawings, cartoons, and abstract effects. Powerful yet simple sliders let you adjust every detail to match your vision, from subtle enhancements to bold artistic transformations. You can also improve your images with tools for contrast, sharpness, color, and brightness, plus add frames and text. It supports JPEG, PNG (including transparency), BMP, and WebP formats for both opening and exporting. Available for Windows (64-bit) and macOS (Apple Silicon and Intel), FotoSketcher also offers batch processing, manual retouching, and custom effects for advanced users. Completely free, including commercial use, with no ads or spyware. FotoSketcher Studio 4.30 changelog: New LUTs effect In the Photo Lab category you will find a new LUTs (Lookup Tables) effect for custom colour grading. It comes with 18 presets built right into the application (Cinematic, Kodachrome, Golden hour, Portrait and more), each with a live preview so you can see the look before applying it. Right-click the preview to compare with your original image. And if you have your own .cube files, you can load those from disk too. New "Stylize" category Added a brand-new Stylize category with four new effects. Three of them (Mosaic, Circles and Triangles) are built on the same space-filling idea, turning your photo into tiled mosaics, clusters of circles, or a low-poly triangle look. The fourth, Cartoon, is a bit different: it gives a clean graphic style with defined lines and solid colours. A little tip - set the colour intensity to 0 and Cartoon draws a pure outline drawing with no fill. Combined with the "Do not erase background" option, you can run it on top of any other effect to add crisp contours in two quick steps. Auto-Enhance and Full Reset Two small but handy additions. Auto-Enhance (just press E) tries to optimise your source photo - exposure, white balance, local contrast - for a 'dehazed', natural-looking starting point. And Full Reset clears everything back to a clean slate in one step (working image, history, LUT, script, brushes and sliders) without having to close and reopen the program. Press Ctrl+Shift+N, or right-click the exit button. Scripts The script engine has been updated to support all the new effects, with a few new commands and improved help. If you would like some inspiration, the recent scripting tutorial on this blog walks through several ready-made example scripts. The usual improvements The interface now uses new colour accents for better readability, the history gallery has had a few tweaks, and you can now open .webp images directly. On top of that, this release includes some performance improvements and a good number of bug fixes. Download: FotoSketcher Studio 4.30 | 55.9 MB (Freeware) Download: FotoSketcher Studio for macOS | 119.0 MB View: FotoSketcher Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • I have a Motorola, one of the lower end ones, it works fine. It is possible to get rid of the Gemini app and also to disable googles assistant , but A.i is still apps. I try to avoid all LLM A.I, is i can, I use no Ai duck duck go.
  • Recent Achievements

    • Conversation Starter
      sumytbe earned a badge
      Conversation Starter
    • One Year In
      B4dM1k3 earned a badge
      One Year In
    • One Year In
      DarkWun earned a badge
      One Year In
    • Dedicated
      Almohandis earned a badge
      Dedicated
    • Dedicated
      JuvenileDelinquent earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      519
    2. 2
      +Edouard
      189
    3. 3
      PsYcHoKiLLa
      87
    4. 4
      Michael Scrip
      81
    5. 5
      Steven P.
      72
  • Tell a friend

    Love Neowin? Tell a friend!