Recommended Posts

Tomato is the way to go, i was a big fan of DD-WRT for a couple of years however switched to Tomato in 2008 and never looked back.

It's running rock sold on my Asus RT-N16 and copes with my recently upgraded 100mbit internet with ease.

Got my router running IPV6 & Open VPN, plus updating a domain in-case my IP ever changes.

IPV6:

24xm8mg.png

Open VPN:

nn5t8n.png

I also quite like how you can check your bandwidth usage history:

novzic.png

It can even act as a print server / nas, although i have a server for tasks like that. It will probably handle and networking related task you wish to do at home with ease anyway (Y)

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/#findComment-595040855
Share on other sites

DD-WRT is still very much alive, many updates this year alone, they just haven't updated the main router database for ages so the builds it finds for your router are ancient

New builds are on the FTP here

ftp://ftp.dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/2012/

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/#findComment-595051559
Share on other sites

:angry: Just decided to give OpenWRT a try and bricked my WRT160NL

Time to dig out the old RS232 TTL again

Note to self: You like DD-WRT and DD-WRT likes you, DO NOT flash alternate firmware ever again.

--

That took far too long to remember the TFTP commands to unbrick

For future reference (when I brick it next time)

PuTTY > update code.bin > command prompt > tftp -i 192.168.1.1 put code.bin

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/#findComment-595052259
Share on other sites

I've got v.1 the broadcom chipset.

Can't see it on their list, but if its anything like DD-WRTs list it might not have been updated

Are you running a custom firmware now ?

DD-WRT is supported

ftp://ftp.dd-wrt.com...19519/broadcom/

Instructions

http://www.dd-wrt.com/wiki/index.php/Linksys_WRT350N

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/#findComment-595052379
Share on other sites

DD-WRT is clunky. I tried both the latest and stable builds and it was shaving off 30Mbps from my maximum connection speed. Their team seems to be sitting back counting donations giving people false hope of their new router being supported. I even sent them a couple routers to them in Germany and here we are a year later and still no word back from them or support for the routers I sent.

I decided to give Tomato a go and never really looked back since.

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/#findComment-595052393
Share on other sites

Can't see it on their list, but if its anything like DD-WRTs list it might not have been updated

Are you running a custom firmware now ?

DD-WRT is supported

ftp://ftp.dd-wrt.com...19519/broadcom/

Instructions

http://www.dd-wrt.co...Linksys_WRT350N

Yea actually runnin the most recent build from 7/20 i wanted to try Tomato to see if it's better but i want to be sure its supported.

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/#findComment-595052399
Share on other sites

I've always been a DD-WRT user and still want to be but the support for my E4200 and newer features (Broadcom in general) seems to be lacking lately. I still checked even now after seeing this thread to see what's been going on and still slow/nothing. I slapped Tomato USB Toastman build on there recently and that thing is flying with more features working than what was offered with DD-WRT. I definitely get faster WLAN to LAN speeds as i've copied files and done tests and it's a big difference, I'd see 12MB/s LAN to WLAN but now that's 30MB/s! WLAN to LAN was always in the 25MB/s range but now that's also 30MB/s :)

IPv6 stuff for those that care or have it (mainly Comcast in the USA) will know that it works too and works great i'm told. DD-WRT doesn't have IPv6 support really, definitely not DHCPv6-PD!

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/#findComment-595052809
Share on other sites

I've always been a DD-WRT user and still want to be but the support for my E4200 and newer features (Broadcom in general) seems to be lacking lately. I still checked even now after seeing this thread to see what's been going on and still slow/nothing. I slapped Tomato USB Toastman build on there recently and that thing is flying with more features working than what was offered with DD-WRT. I definitely get faster WLAN to LAN speeds as i've copied files and done tests and it's a big difference, I'd see 12MB/s LAN to WLAN but now that's 30MB/s! WLAN to LAN was always in the 25MB/s range but now that's also 30MB/s :)

IPv6 stuff for those that care or have it (mainly Comcast in the USA) will know that it works too and works great i'm told. DD-WRT doesn't have IPv6 support really, definitely not DHCPv6-PD!

Yea for them being at sp2 i would expect more features to be implemented. They support a wide range of routers but feature wise they need to be updating them and making them stable... seems like Tomato is similar in that department..not a lot of motivation to really push for updated better features.

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/#findComment-595052883
Share on other sites

Mine is from 1/12/08 if it works why worry. I haven't rebooted or had a problem since forever.

Same here, I haven't rebooted mine since I installed DD-WRT (2 years or a little more), but I guess I am gonna have to do so, I lost the password which is never happened before. lol

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/#findComment-595057663
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Valve finally confirms Steam Machine prices, starts at $1049 for 512GB option by Pulasthi Ariyasinghe The $1,428 option The Steam Hardware lineup that Valve announced last year is slowly starting to roll out. Following the recent Steam Controller launch, Valve has now confirmed the price of the Steam Machine, its all-in-one console-like solution for PC gaming in the living room. There are currently four variants being presented, with only the storage and the included controller being the biggest differences. All of the Steam Machines have the same internals consisting of a semi-custom AMD Zen 4 CPU with six cores and 12 threads, an RDNA 3 28CU GPU, 16GB of DDR5 memory, and 8GB of GDDR6 VRAM, all inside the familiar box Valve has been showing off for months now. The Steam Machine base model starts at $1,049. This has a 512GB NVMe SSD but does not come with a Steam Controller. Keep in mind that storage can be expanded with the microSD card slot too. Next, the $1,128 model has the exact same storage as the previous one but it does come with the new Steam Controller. If you need the Steam Machine to have more storage for games and apps than that, then the 2TB tiers are also available. The $1,349 Steam Machine has no controller once again, but it does ship with two extra faceplates (red fabric and solid walnut) to replace the standard black one. The final option costs $1,428, and it adds the controller back into the bundle. The Steam Machine ships with the Linux-based SteamOS. The box has a 1 Gigabit Ethernet port, DisplayPort 1.4, and HDMI 2.0, as well as one USB-C and four USB-A ports. Keep in mind that when purchasing standalone, the Steam Controller has a $100 price tag. With the above bundles, that drops to $80. It's a rather expensive machine for the internals it is touting, though the design and small form factor do help it somewhat. However, at the same time, the lack of upgradability hurts it. Valve says the ongoing parts shortages and massive price hikes for memory were the leading causes for this price. "The overall effect is that our original goal for the price of Steam Machine is no longer viable," added the company. "So the prices we're sharing today reflect the state of the world for manufacturing; or, more accurately, it reflects the price of the components as we've secured them over the past 6 months." Valve wants interested gamers to reserve it now to get the chance to pre-order a Steam Machine starting June 25, with shipping starting on June 29. Head here to sign up. The invites to buy it will be sent in a randomized order.
    • What the press release doesn’t mention, however, is how much water the natural gas plant itself will consume, Natural gas plants use about 2,803 gallons of water per megawatt-hour produced, which is significantly less than coal-fired plants that use around 19,185 gallons per megawatt-hour. Overall, natural gas plants are more water-efficient, using 584% less water than traditional power plants on average. AI generated
  • Recent Achievements

    • Dedicated
      tuben earned a badge
      Dedicated
    • Week One Done
      mnsgroup earned a badge
      Week One Done
    • Conversation Starter
      sumytbe earned a badge
      Conversation Starter
    • One Year In
      B4dM1k3 earned a badge
      One Year In
    • One Year In
      DarkWun earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      516
    2. 2
      +Edouard
      203
    3. 3
      PsYcHoKiLLa
      97
    4. 4
      Michael Scrip
      82
    5. 5
      neufuse
      67
  • Tell a friend

    Love Neowin? Tell a friend!