Recommended Posts

This Tomato sounds interesting, but my DD-WRT router has been so rock solid I don't want to mess with it, really.

One question about Tomato:

Are there options to force particular connections (by MAC address preferably) to ONLY use OpenDNS for DNS look ups? I like how with DD-WRT I can force a few connections on OpenDNS (like the DirecTV and XBox as well as the kid's iPods and stuff) while the others default to my ISPs. I have to add entries to iptables in dd-wrt to get this functionality and would like a user friendly approach.

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/page/2/#findComment-595057719
Share on other sites

  • 2 weeks later...

Ran DD-WRT for a months but QOS is quite buggy on my dir300, guess you have to pay? to get decent QOS so went to Gargoyle(OpenWRT) and everything is great except for a slower boot time but it got the best QOS out there and Active Congestion Control is an online gamer's best friend.

Another I have noticed is DD-WRT rude mods which turned me off.

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/page/2/#findComment-595084717
Share on other sites

none of the alt. fw supports my WGR614..... might upgrade soon for USB print sharing.... so sick of people having to have me mess with networking crap everytime they wanna print cuz for some reason it screws up all the time. PRINTERS ARE EVIL!!!!

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/page/2/#findComment-595084731
Share on other sites

I have a Linksys WRT54G2 which only DD-WRT seems to support, so guess whats on it

Its currently being used as a wireless bridge (or wireless extender if you like - so easy to set up its not funny), its insanely stable regards data transfer and i havent rebooted it, or even looked physically at it since it was installed 6 months ago. Also dont understand why people whine about the GUI, straight forward if you know what youre doing. Ive seen worse on a Netgear :)

To be honest i havent, nor do i think i will, looked at updating the firmware, it just works, why fix something that aint broken

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/page/2/#findComment-595085437
Share on other sites

Note to self: You like DD-WRT and DD-WRT likes you, DO NOT flash alternate firmware ever again.

--

That took far too long to remember the TFTP commands to unbrick

For future reference (when I brick it next time)

PuTTY > update code.bin > command prompt > tftp -i 192.168.1.1 put code.bin

That's why I don't try these. I'm not comfortable enough- same thing with ROMs for my phones. Hope you're back in business with that router.

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/page/2/#findComment-595086321
Share on other sites

Ran DD-WRT for a months but QOS is quite buggy on my dir300, guess you have to pay? to get decent QOS so went to Gargoyle(OpenWRT) and everything is great except for a slower boot time but it got the best QOS out there and Active Congestion Control is an online gamer's best friend.

Another I have noticed is DD-WRT rude mods which turned me off.

Talking about the good QoS I thought this was a quality firmware I could try on my WRT610v1 that doesn't support TomatoUSB. Then I went to their site, and looked at some screenshots, and realized they even managed to make the DD-WRT interface look good, and they're QoS is just a poor mans copy of Tomato, and since I use my main WRT610v2 with tomato as the actual internet router I don't need to put this crap on it for the QoS.

why would you voluntarily put that thing on a router....

Still looking for a good replacement for DD-WRT then, since this router randomly seizes all communication with everything for a few seconds when playing TSW, and at some other times.

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/page/2/#findComment-595086557
Share on other sites

That's why I don't try these. I'm not comfortable enough- same thing with ROMs for my phones. Hope you're back in business with that router.

Yea I was back in business with it before I posted that method, I knew I could unbrick it because it used to be a locked down samknows router and I had to unlock it the same way originally

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/page/2/#findComment-595086689
Share on other sites

  • 4 months later...

And when you use pfSense you'll never go back to home routers running custom firmware. :p

hmm a nice little Linksys WRT610 on my kitchen wall that barely uses any power and does everything I need at full speed allows me full control of the network. or a big computer box with either a rear antenna that gets blocked by the case or a big antenna mounted higher on the wall with a wire, oh and I also need an extra switch for the wired equipment.

yeah, why wouldn't I want the pfsense solution...

IOS > DDWRT, Look at Cisco's end of life Aironet access points and routers which are now in the $200 price range online.

Still light-years ahead of consumer crap

And I'd still take a nice home router on my kitchen wall running Tomato over that.

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/page/2/#findComment-595426334
Share on other sites

hmm a nice little Linksys WRT610 on my kitchen wall that barely uses any power and does everything I need at full speed allows me full control of the network. or a big computer box with either a rear antenna that gets blocked by the case or a big antenna mounted higher on the wall with a wire, oh and I also need an extra switch for the wired equipment.

yeah, why wouldn't I want the pfsense solution...

If your hole network is based around crappy Wi-Fi speeds, then yes, pfSense is not for you.

You also complain about having an antenna on the wall with a wire, but insist on mounting a router on your kitchen wall...

and I'm pretty sure my little AMD E350 doesn't use that much power.

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/page/2/#findComment-595426412
Share on other sites

Hmm.. that was weird, I believe I specifically mentioned my wired network as well.. you know like the wire that goes from the router to my media bench, where I have my HTPC/Server, networked BD/surround receiver, networked satellite tuner, Xbox 360, and a TV and WiiU connected over wireless. Then I have another wire going upstairs to my second WRT 610 (got it free) that's used as an upstairs Access point, and a switch for the computers and devices on the second floor office/computer room.

All this with a nice anonymous looking 610 on my kitchen wall right above the ADSL modem.

As opposed to the PFsense alternative which would be Modem+big ugly computer box on the floor+ wired antenna on the wall.

to give me the same performance as my 2.4Ghz and 5Ghz 610 I would in fact need two wireless cards and two antennas on the wall. and then I wouldn't get the range and performance of the excellent Linksys MIMO antennas.

Also, as for Crappy WiFi speeds. well I have an two N networks on both 5 and 2.4 Ghz, and this copies as fast as the HDD's in the computers can handle anyways for internal network speed, as for internet speeds, the N network is faster in any case.

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/page/2/#findComment-595426438
Share on other sites

I guess you're right and I'm wrong. (can't be arsed to argue with you over the Internet to be fair)

DD-WRT > pfSense... after all, it's the size that counts. Who wants a HUGE big ugly ITX box standing on the floor.

And for the record, I'm not a mind reader... but thanks for sharing with us your network as a hole.

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/page/2/#findComment-595426464
Share on other sites

"big ugly computer box on the floor"

What?? Who says your router has to be "next" to the modem? And who says it has to be big? Here is a case for 3 nic alix board, its 6.5x6x1 inches -- thats smaller than you 610 ;) (2.6 x 12 x 10 inches)

post-14624-0-40599300-1357054629.png

You clearly have some sort of box "I have my HTPC/Server" That box could be a VM host and pfsense could run in a VM - which just a wire from your modem.. Why you would have your modem in the kitchen is beyond me in the first place.

Your "router" could be where ever you want it to be - to say they have to be in the kitchen is crazy talk, or that they have to big big boxes?? I run multiple machines, my NAS and my router (pfsense) and its all on a N40L that is only 10.5" x 8.3" x 10.2" -- which is also smaller than your router ;) Just a bit thicker ;) It has 4 drives in it currently and only uses like 55 watts. Have it plugged into my killawatt so lets see has used in the last 6392 hours, 358Kwh -- what is that 266 days, and I pay about 12.5 cents per kwh so your talking 17 cents a day roughly to run my NAS, my router and all my play VMs - ubuntu, centos, freebsd, w7, 2k8, w8, etc. etc..

Your router might be able to do everything you want it to do - but sorry its not up to what I like to do on my network. The gateway/firewall between your network and the public internet has little to do with a wireless network. That you want to combine them into one simple little box with few actual networking features -- happy for you. But if looking for wireless coverage and speed - then that hangs off your wired network as AP, not also providing gateway/firewall/nat functions, etc.. Their little cpu/memory not really up to much of anything really.

But sorry it does not have to be a big box, nor does it have to be a power hungry box, nor does it have to sit next to where your modem is -- in your case the kitchen.

BTW - this thread is from jul/aug 2012 ;)

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/page/2/#findComment-595426514
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Liene PixCut S1 Starter Kit gets a whopping 31% discount on Prime Day by Steven Parker Liene reached out to us to share another Prime Day exclusive deal that starts today on Amazon. It gives buyers a massive 31% off on the cost of this color sticker printer and cutting machine. It's basically an all-in-one sticker maker for DIY crafts, custom labels and gifts. It utilizes thermal dye-sublimation at 300 dpi, and offers precise "AI" auto-cutting. Here are some more of its highlights: All-in-One Convenience - Print and Cut in One Step. Say goodbye to the hassle of using separate machines. The PixCut S1 seamlessly integrates high-resolution photo printing and precise die cutting into one streamlined device. With just a few clicks on the user-friendly app, you can edit, print, and cut directly from your smartphone via Bluetooth. Create stickers in just 2 minutes! This all-in-one solution saves you time and effort, making your creative projects more enjoyable and efficient. AI Image Extraction & Precision Cutting - Unleash your creativity with the AI image extraction feature that automatically recognizes and extracts subjects from your photos. Then watch as the high-precision cutting system, guided by the same AI technology, perfectly follows every edge with pinpoint accuracy. This seamless AI-to-cut workflow ensures flawless results every time. Turn any moment into custom stickers with professional edges in minutes - just masterpieces made simple. High-Resolution Prints - Vivid and True-to-Life Colors. Utilizing thermal dye-sublimation technology, the PixCut S1 delivers stunning 300 dpi high-resolution prints with 16.7 million colors. Whether you're printing photos, stickers, or labels, you can expect vibrant, true-to-life color effects that make your creations stand out. Every detail is captured with precision, providing professional-quality results every time. AI Lab - Bring Your Imagination to Life. Upload a photo, pick a style from the Liene Photo App, and watch AI bring your vision to life instantly. Turn selfies into an anime character, a fantasy hero, or a festive holiday illustration — all with stunning realism. One style, endless versions of you. Print your AI art as custom stickers, unique gifts, or social media posts — perfect for avatars and DIY projects. No design experience required. Your creativity is just one click away from magic. Durable Stickers - Create Long-Lasting Creations .Thanks to the four-layer thermal dye-sublimation technology, the photopaper is automatically laminated during printing. Stickers produced by PixCut S1 are durable, waterproof and scratch-resistant, ensuring they remain vibrant and intactover time. Perfect for creating custom stickers, labels, and more that last. No Subscription. Just Pure Creativity. With the Liene app, available on mobile, tablet, and desktop. Unlock 40,000+ free images, fonts & elements (and growing), plus 2000+ ready-to-use templates for phone skins, lens stickers, ID cards, labels, name tags, journaling, and more. No paywalls, no hidden fees, just pure creativity. Turn any idea into a custom creation in minutes. Your imagination has no limits, neither should your software. This deal is for the Starter Kit, so what do you get? What's in the box PixCut S1 Photo Sticker Printer and Cutter x 1 Photo Sticker Cutter Ink Cartridge x 1 (36 sheets) Photo Paper 4"x6" (18 sheets) Sticker Paper 4"x7" (White) x 18 sheets Blade x 1 (Pre-installed) So in short everything you need to get printing and cutting. The Liene PixCut S1 has a 4.3 star rating after more than 1,000 reviews from customers, but we can't promise the landing page always sold this particular model, so do check out the reviews before purchasing. In any case Prime members are covered with a 30 day return or replacement should things not work out so great. Liene Pixcut S1 for $205.99 (was $299.99) 31% off Use code 15PIXCUT6 during checkout Although this is a Prime Day discount, the above code will stay live until June 30. Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • https://www.tenforums.com/tuto...b-results-windows-10-a.html Check the comment dates. Some of them are as old as 2016.
    • I wonder how many are laid off for cost savings, and this being blamed on AI to make it sound less scary and bad, for a more positive "modern, with the times" spin for investors? Because Oracle is down 14% the past year. We're looking at a company struggling here. If AI would actually be working out so well for them that they can do massive layoffs, surely this would've been reflected the past year in their stock value?
    • AI is the beginning, wait until real robots replace more jobs, specifically jobs that require physical work.
    • AI is indeed eliminating jobs, and Oracle just proved it by Hamid Ganji There’s no question that AI has become the hottest trend in workplaces, and every company is trying to adopt AI-driven solutions across its operations. While some industry leaders repeatedly say AI won’t lead to massive layoffs, recent data suggest that AI is actually one of the main reasons some companies are reducing their workforce. According to Oracle’s annual regulatory filing, the company has laid off about 21,000 employees, or 13% of its workforce, amid increasing AI adoption. “The adoption and deployment of AI technologies across our operations have resulted, and may continue to result, in reductions to our workforce,” Oracle said in the filing. The software giant now has approximately 141,000 full-time employees, a notable decrease from 162,000 during the same period last year. Restructuring expenses, including severance payments, cost Oracle $1.84 billion in fiscal 2026. Additionally, around 49,000 Oracle employees were based in the U.S., while approximately 92,000 were employed internationally. Like many other companies, Oracle has fully embraced AI and concentrated much of its efforts on the technology. The company is also a key participant in the United States’ $500 billion Stargate Project, which aims to build multiple AI data centers across the country. When it comes to AI adoption and its impact on the workforce, opinions remain divided. NVIDIA CEO Jensen Huang, whose company has been one of the biggest beneficiaries of the AI boom, recently said in an interview that attributing job cuts to AI is a “lazy” narrative. “The narrative that connects AI to job loss, for many of the CEOs that are doing it – it is just too lazy. AI has just arrived, how is it possible they're already losing jobs?” Huang said. However, statistics and recent reports tell a different story. According to Layoffs.fyi, 196 tech companies have laid off about 119,800 employees so far this year. Reducing staff and replacing roles with AI agents could become one of the most significant trends in the job market in the years ahead.
  • Recent Achievements

    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      464
    2. 2
      +Edouard
      177
    3. 3
      PsYcHoKiLLa
      97
    4. 4
      Michael Scrip
      89
    5. 5
      neufuse
      70
  • Tell a friend

    Love Neowin? Tell a friend!