Recommended Posts

This Tomato sounds interesting, but my DD-WRT router has been so rock solid I don't want to mess with it, really.

One question about Tomato:

Are there options to force particular connections (by MAC address preferably) to ONLY use OpenDNS for DNS look ups? I like how with DD-WRT I can force a few connections on OpenDNS (like the DirecTV and XBox as well as the kid's iPods and stuff) while the others default to my ISPs. I have to add entries to iptables in dd-wrt to get this functionality and would like a user friendly approach.

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/page/2/#findComment-595057719
Share on other sites

  • 2 weeks later...

Ran DD-WRT for a months but QOS is quite buggy on my dir300, guess you have to pay? to get decent QOS so went to Gargoyle(OpenWRT) and everything is great except for a slower boot time but it got the best QOS out there and Active Congestion Control is an online gamer's best friend.

Another I have noticed is DD-WRT rude mods which turned me off.

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/page/2/#findComment-595084717
Share on other sites

none of the alt. fw supports my WGR614..... might upgrade soon for USB print sharing.... so sick of people having to have me mess with networking crap everytime they wanna print cuz for some reason it screws up all the time. PRINTERS ARE EVIL!!!!

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/page/2/#findComment-595084731
Share on other sites

I have a Linksys WRT54G2 which only DD-WRT seems to support, so guess whats on it

Its currently being used as a wireless bridge (or wireless extender if you like - so easy to set up its not funny), its insanely stable regards data transfer and i havent rebooted it, or even looked physically at it since it was installed 6 months ago. Also dont understand why people whine about the GUI, straight forward if you know what youre doing. Ive seen worse on a Netgear :)

To be honest i havent, nor do i think i will, looked at updating the firmware, it just works, why fix something that aint broken

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/page/2/#findComment-595085437
Share on other sites

Note to self: You like DD-WRT and DD-WRT likes you, DO NOT flash alternate firmware ever again.

--

That took far too long to remember the TFTP commands to unbrick

For future reference (when I brick it next time)

PuTTY > update code.bin > command prompt > tftp -i 192.168.1.1 put code.bin

That's why I don't try these. I'm not comfortable enough- same thing with ROMs for my phones. Hope you're back in business with that router.

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/page/2/#findComment-595086321
Share on other sites

Ran DD-WRT for a months but QOS is quite buggy on my dir300, guess you have to pay? to get decent QOS so went to Gargoyle(OpenWRT) and everything is great except for a slower boot time but it got the best QOS out there and Active Congestion Control is an online gamer's best friend.

Another I have noticed is DD-WRT rude mods which turned me off.

Talking about the good QoS I thought this was a quality firmware I could try on my WRT610v1 that doesn't support TomatoUSB. Then I went to their site, and looked at some screenshots, and realized they even managed to make the DD-WRT interface look good, and they're QoS is just a poor mans copy of Tomato, and since I use my main WRT610v2 with tomato as the actual internet router I don't need to put this crap on it for the QoS.

why would you voluntarily put that thing on a router....

Still looking for a good replacement for DD-WRT then, since this router randomly seizes all communication with everything for a few seconds when playing TSW, and at some other times.

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/page/2/#findComment-595086557
Share on other sites

That's why I don't try these. I'm not comfortable enough- same thing with ROMs for my phones. Hope you're back in business with that router.

Yea I was back in business with it before I posted that method, I knew I could unbrick it because it used to be a locked down samknows router and I had to unlock it the same way originally

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/page/2/#findComment-595086689
Share on other sites

  • 4 months later...

And when you use pfSense you'll never go back to home routers running custom firmware. :p

hmm a nice little Linksys WRT610 on my kitchen wall that barely uses any power and does everything I need at full speed allows me full control of the network. or a big computer box with either a rear antenna that gets blocked by the case or a big antenna mounted higher on the wall with a wire, oh and I also need an extra switch for the wired equipment.

yeah, why wouldn't I want the pfsense solution...

IOS > DDWRT, Look at Cisco's end of life Aironet access points and routers which are now in the $200 price range online.

Still light-years ahead of consumer crap

And I'd still take a nice home router on my kitchen wall running Tomato over that.

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/page/2/#findComment-595426334
Share on other sites

hmm a nice little Linksys WRT610 on my kitchen wall that barely uses any power and does everything I need at full speed allows me full control of the network. or a big computer box with either a rear antenna that gets blocked by the case or a big antenna mounted higher on the wall with a wire, oh and I also need an extra switch for the wired equipment.

yeah, why wouldn't I want the pfsense solution...

If your hole network is based around crappy Wi-Fi speeds, then yes, pfSense is not for you.

You also complain about having an antenna on the wall with a wire, but insist on mounting a router on your kitchen wall...

and I'm pretty sure my little AMD E350 doesn't use that much power.

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/page/2/#findComment-595426412
Share on other sites

Hmm.. that was weird, I believe I specifically mentioned my wired network as well.. you know like the wire that goes from the router to my media bench, where I have my HTPC/Server, networked BD/surround receiver, networked satellite tuner, Xbox 360, and a TV and WiiU connected over wireless. Then I have another wire going upstairs to my second WRT 610 (got it free) that's used as an upstairs Access point, and a switch for the computers and devices on the second floor office/computer room.

All this with a nice anonymous looking 610 on my kitchen wall right above the ADSL modem.

As opposed to the PFsense alternative which would be Modem+big ugly computer box on the floor+ wired antenna on the wall.

to give me the same performance as my 2.4Ghz and 5Ghz 610 I would in fact need two wireless cards and two antennas on the wall. and then I wouldn't get the range and performance of the excellent Linksys MIMO antennas.

Also, as for Crappy WiFi speeds. well I have an two N networks on both 5 and 2.4 Ghz, and this copies as fast as the HDD's in the computers can handle anyways for internal network speed, as for internet speeds, the N network is faster in any case.

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/page/2/#findComment-595426438
Share on other sites

I guess you're right and I'm wrong. (can't be arsed to argue with you over the Internet to be fair)

DD-WRT > pfSense... after all, it's the size that counts. Who wants a HUGE big ugly ITX box standing on the floor.

And for the record, I'm not a mind reader... but thanks for sharing with us your network as a hole.

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/page/2/#findComment-595426464
Share on other sites

"big ugly computer box on the floor"

What?? Who says your router has to be "next" to the modem? And who says it has to be big? Here is a case for 3 nic alix board, its 6.5x6x1 inches -- thats smaller than you 610 ;) (2.6 x 12 x 10 inches)

post-14624-0-40599300-1357054629.png

You clearly have some sort of box "I have my HTPC/Server" That box could be a VM host and pfsense could run in a VM - which just a wire from your modem.. Why you would have your modem in the kitchen is beyond me in the first place.

Your "router" could be where ever you want it to be - to say they have to be in the kitchen is crazy talk, or that they have to big big boxes?? I run multiple machines, my NAS and my router (pfsense) and its all on a N40L that is only 10.5" x 8.3" x 10.2" -- which is also smaller than your router ;) Just a bit thicker ;) It has 4 drives in it currently and only uses like 55 watts. Have it plugged into my killawatt so lets see has used in the last 6392 hours, 358Kwh -- what is that 266 days, and I pay about 12.5 cents per kwh so your talking 17 cents a day roughly to run my NAS, my router and all my play VMs - ubuntu, centos, freebsd, w7, 2k8, w8, etc. etc..

Your router might be able to do everything you want it to do - but sorry its not up to what I like to do on my network. The gateway/firewall between your network and the public internet has little to do with a wireless network. That you want to combine them into one simple little box with few actual networking features -- happy for you. But if looking for wireless coverage and speed - then that hangs off your wired network as AP, not also providing gateway/firewall/nat functions, etc.. Their little cpu/memory not really up to much of anything really.

But sorry it does not have to be a big box, nor does it have to be a power hungry box, nor does it have to sit next to where your modem is -- in your case the kitchen.

BTW - this thread is from jul/aug 2012 ;)

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/page/2/#findComment-595426514
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Meta announces a major leadership change at WhatsApp by Pradeep Viswanathan Meta has announced a major leadership change at WhatsApp, with Will Cathcart stepping down after seven years of leading the world's largest messaging platform. CRED CEO and founder Kunal Shah will take over as the next global head of WhatsApp. CRED is an Indian fintech company focused on creditworthy consumers. As part of the transition, Meta is also making a minority investment in CRED through its Series H funding round. Meta CEO Mark Zuckerberg said Will Cathcart will remain at Meta and move into a new role focused on building new products from the ground up. Cathcart led WhatsApp during a major growth phase, helping the app reach more than 3 billion users worldwide. He also played a key role in expanding WhatsApp’s business offerings while keeping privacy and end-to-end encryption central to the product. Meta’s Chief Product Officer, Chris Cox, said Kunal Shah was selected after a search for a leader who understands WhatsApp’s global scale and future potential. In a leaked internal memo, Cox described Shah as a “serial founder” and one of India’s most respected entrepreneurs, adding that he brings “entrepreneurial energy” and a strong product mindset to the role. As part of the Series H funding round, CRED is raising ₹8,550 crore, or about $900 million, in a round led by Meta. The funding values CRED at ₹43,239 crore, or about $4.5 billion, on a post-money basis. It is important to note that this investment will not give Meta access to CRED customer information. Kunal posted the following on X regarding his new role at Meta: Although Kunal Shah will be stepping away from his operating role as CRED CEO, he will retain his personal shareholding in the company.
    • It wouldn't be hard for me to turn off my TV, if I had one. For one thing, I never scroll Instagram. The only reason I have an account is because Meta created one when it merged the account systems for its various services.
    • OpenAI's new GPT-5.5-Cyber tops Claude Mythos 5 in vulnerability benchmark by Pradeep Viswanathan OpenAI today announced a major expansion of Daybreak, a cybersecurity initiative designed to help defenders find, validate, and fix software vulnerabilities earlier in the development process. The availability of powerful AI models has definitely changed the cybersecurity landscape by making vulnerability discovery much faster. However, the bigger bottleneck for the industry is now patching those vulnerabilities. Impacted software teams need to validate the discovered issues, understand their impact, develop fixes, test them, and deploy patches. Back in March, OpenAI launched a preview of Codex Security, which uses agentic reasoning with automated validation to discover high-impact issues and actionable fixes specific to the codebase. Since then, it has scanned more than 30 million commits across over 30,000 codebases; more than 70,000 findings were marked as fixed by human reviewers, while over 500,000 findings were automatically determined to be fixed. Now, OpenAI is releasing an updated Codex Security plugin that can run deep scans, review recent code changes, generate security reports, trace attack paths, validate findings, and create codebase-specific patches for human review. It can also triage findings from existing scanners, advisories, bug bounty reports, and ticketing systems. OpenAI says the plugin can export results to vulnerability management systems and integrate with workflows using SARIF files, CodeQL queries, the Codex CLI, and the Codex app. Back in May, OpenAI announced the preview of GPT-5.5-Cyber, a new model built on top of the recently released GPT-5.5, designed for specialized cybersecurity work. Today, OpenAI launched the full version of GPT-5.5-Cyber through a limited release for verified defenders. On CyberGym, GPT-5.5-Cyber scored 85.6%, compared with 81.8% for GPT-5.5 and 83.8% for Claude Mythos 5. It also scored 39.5% on ExploitGym, compared with 25.95% for GPT-5.5, and 69.8% on SEC-bench Pro, compared with 63.1%. OpenAI also announced the new Daybreak Cyber Partner Program, which will allow security vendors and service providers to use GPT-5.5 with Trusted Access for Cyber in their products and services. Accenture, Akamai, Cisco, Cloudflare, CrowdStrike, IBM, Palo Alto Networks, Proofpoint, SentinelOne, Wiz, Zscaler, and others were listed as initial partners for this program. OpenAI is also launching Patch the Planet with Trail of Bits, HackerOne, Calif, researchers, and maintainers. More than 30 open-source projects have committed to participate, including cURL, Go, Python, Sigstore, and pyca/cryptography.
    • AMD confirms 26.6.2 FSR driver breaks on many Windows PCs by Sayan Sen Earlier today AMD released a major graphics driver update as it brings support for FSR 4.1 to Radeon RX 7000 series GPUs. The new update, version 26.6.2, also brings support for Assassin's Creed Black Flag Resynced and more. And while the driver technically supports Windows 10 version 21H2 and newer, the tech giant has confirmed that there is a major issue with the new driver on non-Windows 11 PCs as it fails to launch properly on such systems. The error message says, "The version of AMD Software that you have launched is not compatible with your currently installed AMD graphics driver." Therefore on the surface it looks like a compatibility problem. AMD has also confirmed that the device manager will display the yellow bang or yellow exclamation sign alongside your GPU under the Display adapters dropdown. Here is what the Radeon team's official advisory recommends to affected users: "Users Running Windows 10 and AMD Software: Adrenalin Edition 26.6.2 May Encounter Yellow Bang in Device Manager Affecting AMD Radeon RX Series Graphics ... Our Engineers are currently investigating this issue and will provide a fix once it is available. Affected users may revert to AMD Software: Adrenalin Edition 26.6.1 as a temporary workaround." As such you should revert back to the previous 26.6.1 driver which was released earlier this month. In case you were looking to play Assassin's Creed Black Flag Resynced and DOOM: The Dark Ages | Revelations you will probably have to wait a while if you want the driver to support those games officially. You can find the support article here on Microsoft's website.
  • Recent Achievements

    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
    • Dedicated
      tuben earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      508
    2. 2
      +Edouard
      208
    3. 3
      PsYcHoKiLLa
      98
    4. 4
      Michael Scrip
      89
    5. 5
      neufuse
      71
  • Tell a friend

    Love Neowin? Tell a friend!