Recommended Posts

I am using IE10 from Windows 8 RTM. I cannot press enter and go to next line. This does not work while creating or modifying a post. Anyone with this issue?

AFAIK it's a known issue here on neowin atm

I personally don't know if it's an IPB bug or just a neowin bug, if it's IPB related there's not much neowin can do till the next update

Yeah I get the thing where you can't press enter, just gotta turn off WYSIG mode (going back to plain text) then you can press enter so it might be a simple (temporary) fix for now at least.

It wasn't that way on RP or CP AFAIK.

Yeah I get the thing where you can't press enter, just gotta turn off WYSIG mode (going back to plain text) then you can press enter so it might be a simple (temporary) fix for now at least.

erm, how would I go about doing that?

I am using IE10 from Windows 8 RTM. I cannot press enter and go to next line. This does not work while creating or modifying a post. Anyone with this issue?

Not just on IE10, happens in Chrome sometimes as well. Although pressing shift + enter works in Chrome whereas it doesn't in IE10

erm, how would I go about doing that?

When you start typing here in the quick reply window, there's a little switch on the top left of the box. Click that to turn it off and you can always turn it back on without losing anything typed.

I am using IE10 from Windows 8 RTM. I cannot press enter and go to next line. This does not work while creating or modifying a post. Anyone with this issue?

I was JUST about to post about this. Been going on for weeks, and driving me NUTS!

When you start typing here in the quick reply window, there's a little switch on the top left of the box. Click that to turn it off and you can always turn it back on without losing anything typed.

oh cool, thanks :D

I was JUST about to post about this. Been going on for weeks, and driving me NUTS!

LOL, me too :p

I am using IE10 from Windows 8 RTM. I cannot press enter and go to next line. This does not work while creating or modifying a post. Anyone with this issue?

I wasn?t having this problem until a few weeks ago. You can temporarily resolve the issue by forcing IE into in a specific compatibility mode. For me the issue happens because the browser is defaulting to IE9 mode with IE10 standards.

1. Press F12 to enter Developer Mode.

2. Set Menu "Browser Mode" to "Internet Explorer 9"

3. Set Menu "Document Mode" to "Internet Explorer 9 standards"

Otherwise set both "Browser Mode" and "Document Mode" to "Internet Explorer 10" values, however the full editor will act a bit buggy when fully in IE10 render mode.

Long term, the issue can be resolved by neowin forcing IE10 into a specific render mode, or eventually Microsoft may add it to a compatibility mode update. (http://msdn.microsof...y/cc288325.aspx) Its also possible that the compatibility update for IE10 already exists, but only for RTM.

  • Like 2
This bites. they only offer IE10 for windows 8? am i to understand that Win8 won't allow for other browsers? Sorry I'm not up on the latest but is this true?

If you're joking: LOL :D

If you're serious: erm, no, Chrome, Firefox, Opera, Rockmelt, IE, and every other browser that worked in Win 7 is still supported in Win 8 :D

This bites. they only offer IE10 for windows 8? am i to understand that Win8 won't allow for other browsers? Sorry I'm not up on the latest but is this true?

No. IE10 will be released for Windows 7, and other browsers won't be allowed to access low level system API's in the RT version of Windows, they will only be allowed into the Windows 8 store if they run as fully RT code which means IE will have a significant advantage on the ARM version of Windows 8.

This bites. they only offer IE10 for windows 8? am i to understand that Win8 won't allow for other browsers? Sorry I'm not up on the latest but is this true?

windows 8 can still run any browser. only on ARM machines will you be restricted to IE (unless MS eventually decides to allow other browsers in the market)

No. IE10 will be released for Windows 7, and other browsers won't be allowed to access low level system API's in the RT version of Windows, they will only be allowed into the Windows 8 store if they run as fully RT code which means IE will have a significant advantage on the ARM version of Windows 8.

I appreciate that. If it works good and I like it, I'll definitely use it as my primary browser. I'm just surprised they haven't released a "public release" aside from Win8 public preview. but thank you

No. IE10 will be released for Windows 7, and other browsers won't be allowed to access low level system API's in the RT version of Windows, they will only be allowed into the Windows 8 store if they run as fully RT code which means IE will have a significant advantage on the ARM version of Windows 8.

how much you wanna bet there will be a "Jailbreak" of sorts for Windows RT? :p

i personally wouldn't be surprised in the least

What has that got to do with this topic?

Anyway, cheers to whoever suggested the dev mode trick. I am forcing IE10 to run in IE9 mode and enter button now works to go to next line.

interesting.. I never knew that existed. did you have to add a /devmode to the command line or is that in the settings?

I appreciate that. If it works good and I like it, I'll definitely use it as my primary browser. I'm just surprised they haven't released a "public release" aside from Win8 public preview. but thank you

My guess is that IE10 will be released for 7 at the same time that Windows 8 reaches general release. The improvements aren't as big as from IE8 to IE9 so I wouldn't call it a must have but in UI terms not much has changed so there won't be much for you to adapt to, just a few under the hood improvements mainly :)

how much you wanna bet there will be a "Jailbreak" of sorts for Windows RT? :p

i personally wouldn't be surprised in the least

Oh I have no doubt people will try it, but unfortunately that will be of no value if the major browser vendors cease development on their browsers because of the restrictiveness of all of this.

Personally I have a feeling the antitrust folks may yet have something to say about it but yeah I'm sure people will try to hack them.

interesting.. I never knew that existed. did you have to add a /devmode to the command line or is that in the settings?

As I recall at one time it had to be enabled, but that was a very long time ago now I think. On at least IE9 and IE10 you just hit F12 or look under the Tools menu.

This is also what to use if you want to alter IE's user agent strings on the fly under the Developer Mode Tools menu.

Oh I have no doubt people will try it, but unfortunately that will be of no value if the major browser vendors cease development on their browsers because of the restrictiveness of all of this.

Personally I have a feeling the antitrust folks may yet have something to say about it but yeah I'm sure people will try to hack them.

I doubt they'll cease development, they'll probably even release versions to the market eventually, and it's when that happens that a "Jailbreak" of sorts will come in handy.

i expect a tweak to eventually release similar to this tweak that just released recently for iOS http://www.iphonehacks.com/2012/07/nitrous-enables-faster-nitro-javascript-engine-for-third-party-apps.html

I doubt they'll cease development, they'll probably even release versions to the market eventually, and it's when that happens that a "Jailbreak" of sorts will come in handy.

i expect a tweak to eventually release similar to this tweak that just released recently for iOS http://www.iphonehac...party-apps.html

I have a feeling that they will release neutered versions that comply with the RT guidelines just to get in the store. Which would mean there would be little advantage to a jailbreak. Of course that wouldn't stop developers trying to port the code themselves so you still have a good point

This topic is now closed to further replies.
  • Posts

    • Onkyo Dolby Atmos AV receivers are really solid deals by Sayan Sen Recently we covered great deals on several soundbar models from the likes of Sony, JBL, Samsung and others for really good prices (the lowest in several months). Aside from that we also reported on the Edifier S3000MKII, a hi-fi two-way bookshelf monitor that's available for only $800. Today we bring a list of AV receivers from Onkyo that are available at great prices including the Onkyo NR7100, RZ30, and 8470 (purchase links under the specs table down below). The Onkyo TX-NR7100 and Onkyo TX-RZ30 are both 9.2-channel AV receivers designed for immersive home theater setups but they occupy slightly different tiers within Onkyo’s lineup with the RZ30 positioned as the more advanced model. The TX-NR7100 is a THX Certified 9.2-channel receiver offering up to 100 W per channel (8 ohms, 2 channels driven). It supports Dolby Atmos, DTS:X, and IMAX Enhanced formats, with flexible configurations such as 5.1.4 or 7.1.2 speaker layouts. A key highlight is its built-in Dirac Live Room Correction which should help optimize sound based on your room and its acoustics. In comparison, both models share several core capabilities though the RZ30 is geared toward enthusiasts seeking more precise calibration and system flexibility, while the NR7100 is positioned as a slightly more accessible, value-focused option with strong all-round performance. The technical specs of the RZ30 and NR7100 9.2 AVRs are given in the table below: Specification Onkyo TX-RZ30 Onkyo TX-NR7100 Power Output (FTC, 2ch driven) ~100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) 100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) Dynamic / Peak Power 9 × 170 W (6Ω, 1kHz, 1% THD, 1ch driven) 220 W/ch (6Ω, 1kHz, 10% THD, 1ch driven) Frequency Response 5 Hz – 100 kHz (+1/-3 dB) 10 Hz – 100 kHz (+1/-3 dB) THD 0.08% 0.08% Room Correction Dirac Live (full bandwidth) Dirac Live (with AccuReflex support) Immersive Audio Dolby Atmos, DTS:X, IMAX Enhanced Dolby Atmos, DTS:X, IMAX Enhanced Speaker Layout Support Up to 7.2.2 / 5.2.4 / 9.2 processing Up to 7.2.4 / 5.2.4 / 9.2 processing HDMI Inputs / Outputs 6 inputs / 2 outputs (eARC) 6 inputs / 2 outputs (Main + Sub/Zone 2) HDMI 2.1 Support 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC Video Formats HDR10+, Dolby Vision, HDCP 2.3 HDR10+, Dolby Vision, HDCP 2.3 Streaming / Network Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Get them at the links below: Onkyo TX-RZ30 9.2-Channel AV Receiver: $797.00 (Sold and shipped by Electronic Expo) Onkyo TX-NR7100 9.2-Channel AV Receiver: $699.00 (Sold and shipped by Adorma) Onkyo TX-8470 2 Ch Stereo Receiver: $449.00 (Sold and Shipped by Adorma) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links or authorized dealer links (at the time of article publishing); ensure that you purchase from such links only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • A different thing with Russia. When you say is it better, depends on things. It is better that we don't have the E.U making rules and laws that have nothing to do with them. Is the trading part better? No, that is really mucked up, but then we knew that was going to happen and we would have make agreements, like we do with other parts of the world. Freedom of movement is certainly better, but could be improved, we still need more control over our borders. do you live in the U.K?
    • So what am I quoting from them? I never listened to what Farage or his cronies said. I wanted the U.K to leave the E.u years before the referendum and it had nothing to do with Farage and his cronies. So what country do you live in? Did we work much better together? We were always at logger heads with the E.U because we disagreed with them so much. Maggie was always on at them. I would have thought the E.U was glad to get rid of us as we stopped the integration or made it a two tier. Now without us they can integrate more. I would not have voted out if it was just a trading block and we can still work together on somethings.
    • MPC-BE 1.9.0 by Razvan Serea Media Player Classic - BE is a free and open source audio and video player for Windows. Media Player Classic - BE is based on the original "Media Player Classic" project (Gabest) and "Media Player Classic Home Cinema" project (Casimir666), contains additional features and bug fixes. The BE mod (Black Edition Mod) is a skinned version of Media Player Classic Home Cinema, much better looking than the plain old MPC. MPC-BE 1.9.0 changelog: Splitters Fixed crashes in some situations. AudioSplitter Added support for the RF64 format. Fixed reading of channel layout for some WavPack files. Added support for ID3 tags for Wave64 files. Unknown Wave64 chunks are now ignored. AviSplitter Added support for 'y408' video. Improved support for 'HEVC' video. FLVSplitter Added support for VVC video. MP4Splitter Improved handling of corrupted files. MatroskaSplitter Expanded support for V_UNCOMPRESSED video codecs. Fixed support for frame rotation (ProjectionPoseRoll). Improved support for "V_MS/VFW/FOURCC / HEVC". MpcDvdVideoDecoder Fixed conversion to YUY2. Fixed display of menus for some DVD-Videos. RoQVideoDecoder Output in NV12 and YV12 formats is allowed. Full range is used. MPC Video Decoder RGB32 format will be output as a top-down bitmap by default. Added support for the "IID_MediaSideDataDOVIMetadataV2" interface. Removed support for the deprecated "IID_MediaSideDataDOVIMetadata" interface. Fixed retrieving the name of the video adapter when using NVDEC. Fixed crashes in some situations. MPC Video Converter Added support for AYUV video format. MpcAudioRenderer Improved input format validation. Optimized retrieval of supported formats for exclusive mode. Added the "Keep audio device active when paused" setting. Fixed crashes and freezes in various situations. Subtitles Added the ability to open the properties of an external subtitle renderer in the "Subtitles" settings panel. Fixed external subtitle connections for VSFilter. Fixed a crash when rendering PGS/SUP subtitles when using AVX2. YouTube Improved support for yt-dlp. The built-in YouTube parser is no longer used. Player The HTTP read strategy has been changed. If the playlist contains one entry, more key combinations can be used to control the player (jump through chapters, adjust volume). Improved support for reading ASX playlists. The translation of the MediaInfo report for Chinese, Korean and Japanese has been removed. Added blocking of 32-bit filter "PICVideo Lossless JPEG Decompressor" (pvljpg20.dll), because it crashes. Added blocking of the system filter "AVI Decompressor", which will eliminate the crash of VFW codecs. Fixed a rare crash when using the "/slave" key. Fixed a crash when getting a list of fonts for OSD. Added the ability to load an external audio file using hotkeys. Fixed opening a network path starting with \?\UNC. The "Determine duration when adding" playlist setting now works for YouTube video URLs. The "Online media services" settings panel has been redesigned. Added a "Merge files using FFmpeg" option to the file saving dialog. This option is activated when playing multiple streams obtained using yt-dlp. Added loading of local .dpl playlists ("DAUMPLAYLIST"). Fixed a hang when the user closes the player during the URL opening process. Various interface fixes. Installer Updated MPC Video Renderer 0.10.5. Updated MPC Script Source 0.2.17. Added MPC Image Source 0.3.6. Translations Updated Japanese translation (by tsubasanouta). Updated Chinese (Traditional) and Dutch translation (by beter). Updated Romanian translation (by Andrei Miloiu). Updated Hungarian translation (by mickey). Updated Turkish translation (by cmhrky). Updated German translation (by Klaus1189). Updated Chinese (Simplified) translation (by wushantao). Updated Italian translation (by mapi68). Updated Korean translation (by Hackjjang). Updated Chinese (Traditional) (by udfbe). Updated libraries dav1d 1.5.3-6-g04b69f9; ffmpeg n8.2-dev-1857-g4653e68aab; libpng git-v1.6.55-9-g7d52a8087; Little-CMS git-lcms2.18-26-gf739cda; MediaInfo git-v26.05-38-g702c9b7fd; ZenLib git-v0.4.41-91-g073f297; zlib 1.3.2. Download: MPC-BE 64-bit | Portable MPC-BE 64-bit | ~20.0 MB (Open Source) Download: MPC-BE 32-bit | Portable MPC-BE 32-bit Link: Media Player Classic - BE Home Page Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Apple reportedly looks to blacklisted Chinese memory chips as RAM prices climb by Karthik Mudaliar Image via Apple Apple is reportedly trying to get a clearance from the Trump administration to buy memory from ChangXin Memory Technologies (CXMT) to get some relief from soaring DRAM prices. As per a report by the Financial Times, Apple approached the Commerce Department more than a month ago and also spoke to other officials and allies in Washington. For starters, CXMT is a company that's already been placed on the Pentagon's list of Chinese military companies. The Chinese company is the country's top DRAM maker. For Apple, the timing is certainly awkward but not surprising. Tim Cook had recently warned that Apple would have to raise prices because AI companies are buying up large amounts of memory for data centers, and just like that, Apple raised MacBook and iPad prices. Micron also recently revealed that customers have committed billions of dollars to secure memory supply years in advance, which shows us how aggressive securing infrastructure has become. This gives suppliers such as Samsung, SK Hynix, and Micron more leverage, while pushing hardware makers to look for alternatives. CXMT is one of those alternatives, but not the simplest one. Apple has spent many years trying to diversify parts of its supply chain away from China, especially for final assembly, while still depending heavily on Chinese manufacturing and suppliers. Even domestic brands from China are moving towards CXMT and YMTC instead of relying on Samsung, Micron, and SK Hynix. For Apple, though, it would invite more scrutiny than local Chinese companies. For now, this is more like a lobbying effort rather than a confirmed supply deal. There's no official statement from either of the parties. What is clearer, though, is the pressure behind such a request. AI demand has certainly made hardware a bottleneck, and companies are trying everything they can to bring things back to normal, even if that means making politically sensitive choices. Source: Financial Times
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      493
    2. 2
      +Edouard
      227
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      Steven P.
      75
    5. 5
      FloatingFatMan
      70
  • Tell a friend

    Love Neowin? Tell a friend!