NIST Selects Winner of Secure Hash Algorithm (SHA-3) Competition


Recommended Posts

The National Institute of Standards and Technology (NIST) today announced the winner of its five-year competition to select a new cryptographic hash algorithm, one of the fundamental tools of modern information security.

The winning algorithm, Keccak (pronounced "catch-ack"), was created by Guido Bertoni, Joan Daemen and Gilles Van Assche of STMicroelectronics and Micha?l Peeters of NXP Semiconductors. The team's entry beat out 63 other submissions that NIST received after its open call for candidate algorithms in 2007, when it was thought that SHA-2, the standard secure hash algorithm, might be threatened. Keccak will now become NIST's SHA-3 hash algorithm.

Hash algorithms are used widely for cryptographic applications that ensure the authenticity of digital documents, such as digital signatures and message authentication codes. These algorithms take an electronic file and generate a short "digest," a sort of digital fingerprint of the content. A good hash algorithm has a few vital characteristics. Any change in the original message, however small, must cause a change in the digest, and for any given file and digest, it must be infeasible for a forger to create a different file with the same digest.

The NIST team praised the Keccak algorithm for its many admirable qualities, including its elegant design and its ability to run well on many different computing devices. The clarity of Keccak's construction lends itself to easy analysis (during the competition all submitted algorithms were made available for public examination and criticism), and Keccak has higher performance in hardware implementations than SHA-2 or any of the other finalists.

"Keccak has the added advantage of not being vulnerable in the same ways SHA-2 might be," says NIST computer security expert Tim Polk. "An attack that could work on SHA-2 most likely would not work on Keccak because the two algorithms are designed so differently."

Polk says that the two algorithms will offer security designers more flexibility. Despite the attacks that broke other somewhat similar but simpler hash algorithms in 2005 and 2006, SHA-2 has held up well and NIST considers SHA-2 to be secure and suitable for general use.

What then will SHA-3 be good for? While Polk says it may take years to identify all the possibilities for Keccak, it immediately provides an essential insurance policy in case SHA-2 is ever broken. He also speculates that the relatively compact nature of Keccak may make it useful for so-called "embedded" or smart devices that connect to electronic networks but are not themselves full-fledged computers. Examples include sensors in a building-wide security system and home appliances that can be controlled remotely.

"The Internet as we know it is expanding to link devices that many people do not ordinarily think of as being part of a network," Polk says. "SHA-3 provides a new security tool for system and protocol designers, and that may create opportunities for security in networks that did not exist before."

For more on the SHA3 competition, see http://csrc.nist.gov...a-3/index.html.

Source: NIST

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • yes AND no the "original" or plain/normal Optiplex 7010 won't be getting any more new firmware updates BUT the Optiplex SFF/SFF Plus {small form factor}, Micro/Micro Plus & Tower/Tower Plus 7010 editions DO get new updates such as this new one   and here are similar guides from the Dell web site for Dell systems: https://www.dell.com/support/kbdoc/en-us/000390990/secure-boot-transition-faq https://www.dell.com/support/kbdoc/en-us/000347876/microsoft-2011-secure-boot-certificate-expiration
    • AT&T has been spying on US citizens with the NSA for decades.. they just know how to keep it more under wraps.. the evil level is still there.
    • >Improved system sounds when using Windows in dark mode. The story behind that bug would be an interesting one.
    • Edifier S3000MKII hi-fi audiophile grade bookshelf speaker is at its lowest price now by Sayan Sen Yesterday we covered a bunch of Dolby Atmos soundbar deals with several ones from Sony, as well as from JBL, Samsung, Polk Audio, and more. You can check them out in this dedicated piece. Those are not audiophile category speakers though as they are built with home theater use in mind. If you are searching for the former then Edifier has its S3000MKII at its lowest price at the moment (purchase link under the specs table down below). This is a two-way bookshelf monitor speaker designed to produce accurate sound. While it may not produce the best high-fidelity audio possible out there, it should still be significantly better than what you will get on soundbars of this price range. As such it will do justice to high-res audio played back through it. The only thing that may feel lacking is sub-bass as Edifier claims the unit can go down to 38 Hz, which should be enough for studio monitor purposes, but not for deep room-shaking rumbling bass. Where this does excel though is in its treble reproduction. With its super-tweeter, it claims to go as high as 40 kHz in the frequency spectrum, which should offer a sense of "air"yness. This is an active speaker which means it packs its own amplfication. It has a top-notch Class D amp that may be able to rival many Class AB designs too in terms of sound reproduction quality. The technical specs of the Edifier S3000MKII are given in the table below: Specification Value RMS Output Power 256W RMS (Treble: 8W × 2, Mid-Low: 120W × 2) Tweeter Driver 107mm × 107mm Planar Magnetic Tweeter Mid-Low Driver 6.5-inch (179mm) Long-Throw Aluminum Diaphragm Driver Frequency Response 38Hz – 40kHz Signal-to-Noise Ratio ≥ 85dB (A) Bluetooth Version Bluetooth 5.0 Bluetooth Codec Qualcomm® aptX™ HD Wireless Speaker Link Proprietary 5.8GHz wireless connection between speakers Supported Hi-Res Audio Hi-Res Audio Certified, up to 24-bit/192kHz Digital Processing XMOS XU216 Digital Signal Processor Audio Inputs Balanced XLR, Optical, Coaxial, USB Type-B, Line In, Bluetooth Input Sensitivity (USB) 400 ± 50mFFs Input Sensitivity (Optical) 400 ± 50mFFs Input Sensitivity (Coaxial) 400 ± 50mFFs Input Sensitivity (Bluetooth) 450 ± 50mFFs Input Sensitivity (Balanced XLR) 1000 ± 50mV Input Sensitivity (Line In) 600 ± 50mV ADC Capability Up to 24-bit/192kHz DSP Capability Up to 24-bit/192kHz DIX Capability Up to 24-bit/216kHz DAC Capability Up to 32-bit/384kHz XMOS Processing Power Up to 2,000 MIPS Edifier S3000MKII Audiophile Active (Powered) Wireless Speakers: $799.99 (Sold by Edifier US, Shipped by Amazon US) If you do not have the kind of budget to spend on the S3000MKII, you can also check out the Edifier R1280Ts which is right now on sale at just $114 (its lowest price in a very long time). Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
    • Week One Done
      tuben earned a badge
      Week One Done
    • First Post
      OffsetAbs earned a badge
      First Post
    • Reacting Well
      OffsetAbs earned a badge
      Reacting Well
  • Popular Contributors

    1. 1
      +primortal
      442
    2. 2
      +Edouard
      200
    3. 3
      PsYcHoKiLLa
      155
    4. 4
      FloatingFatMan
      71
    5. 5
      Steven P.
      67
  • Tell a friend

    Love Neowin? Tell a friend!