Recommended Posts

wifi-signal-boost-6.jpg

I love a good hack, especially one that requires me to throw back a cold one before hand (or during). This simple wifi boost has actually been shown to increase signal strength by at least 2 to 4 bars. And, well, I will drink to that.

These instructions came to us via WikiHow and we think they are most definitely worth checking out. But here is the most important question: what kind of beer will you use?

For this project you are going to need scissors, a utility knife, some adhesive putty and an empty beer can. More than one empty beer can is acceptable but don?t kid yourself, the router only needs the one.

wifi-signal-boost-7.jpg

The first step is to wash out your empty beer can, unless of course said beer is a can of <your beer of choice>. If it is American beer -- which tastes like pee -- promptly go drink a better beer. You really should be ashamed of yourself.

wifi-signal-boost-0.jpg

Once the can has dried, you will want to remove it?s pull tab.

wifi-signal-boost-1.jpg

Only perform this next step if you have not been drinking. Using the utility knife, saw off the bottom of the can. Chances are your can will not have a red dotted line. If you see one, put down the knife?you?ve had too much beer.

wifi-signal-boost-2.jpg

wifi-signal-boost-3.jpg

You?ll notice in the above step that the can?s pull tab has returned. Clearly, there are only two possible reasons for this. One, you are really drunk and you never removed the tab in the first place. Or ? the more likely answer ? beer cans can regenerate themselves.

wifi-signal-boost-4.jpg

It?s the home stretch! You just need to attach your modded beer can to the wifi router. Hopefully no other parts of the can have actually grown back. You now have beer-fi!

wifi-signal-boost-5.jpg

So, what kind of beer did you use?

http://dsc.discovery...a-beer-can.html

I tried it since the wifi signal in my house sucks (and its a small house too). Didn't do anything as far as I could tell, but mine was a half-arsed attempt using the hole in the top to keep it in place.

I tried it since the wifi signal in my house sucks (and its a small house too). Didn't do anything as far as I could tell, but mine was a half-arsed attempt using the hole in the top to keep it in place.

Maybe you used the wrong can, a coca cola can?

Will a Monster energy can work? :)

Out of all seriousness, I have read about some of these hacks, (Pringles Can bring back any memories?), which supposedly boost the signal. All the can is doing is reflecting the signal more directly. But if you stop and think about it, wouldn't that reduce the signal in the opposite direction? For example, I am in a small (650 sq ft) apartment. My router is running DD-WRT and sits in a a cubby in my desk. The signal is dampened by lots of wood around it and behind it. Yet, everywhere in the apartment (granted small area), I get some strong signals. Even outside in the parking lot, I can connect.

  • 2 weeks later...

certainly will try

But I am almost quite certain that I will need a hardware dedicated booster , because my router is in the 3rd floor, while I have PCs in 1st, 2nd floor with no signal in the 1st floor

What do you call this booster? Access point?

Has anyone ever tried that? I looks like it might help.

It should help, not sure about broadcasting boost, it might help slightly with directional if your laptop was somewhere infront of that can, but to catch the client signal (laptop etc) there is now a 1000% bigger area for the signal to reach and bounce to the antenna

I've seen people create directional client cantennas that can pick up wifi signals from a lot further away than the antenna on its own can reach ( USB wifi dongle & pringles can)

What if you have a ****ty AT&T router/wifi hotspot with no antennae?

GET THIS HARDCORE REPEATER!!!!!! OR THIS ACCESS POINT!!!!! I HAVE THE ACCESS POINT AND ITS GOT HARDCORE COVERAAAAAAAGGGEEEE!!!!

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • The fact that memory in general is so high I have to take a loan out to build a computer now is just beyond stupid. Who's really to blame here? Low supply or high demand?
    • Display Driver Uninstaller (DDU) 18.1.5.5 by Razvan Serea Display Driver Uninstaller (DDU) is a utility for completely removing AMD/NVIDIA/INTEL graphics drivers and related packages from your system, attempting to eliminate all leftovers (including registry entries, folders and files, driver store). Though AMD/NVIDIA/INTEL drivers can usually be removed via the Windows Control Panel, this uninstaller tool was created for situations where standard uninstall fails, or when you need to fully remove NVIDIA or ATI graphics card drivers. After using this driver cleaner, your system will behave as though it’s the first time you’re installing a new driver—similar to a fresh Windows installation. As with all such tools, we recommend creating a restore point beforehand, allowing you to undo changes if issues arise. If you're having trouble installing an older or newer driver, try it—there are reports that it resolves such problems. Recommended usage: The tool can be used in Normal mode but for absolute stability when using DDU, Safemode is always the best. Make a backup or a system restore (but it should normally be pretty safe). It is best to exclude the DDU folder completely from any security software to avoid issues. You do NOT need to uninstall the driver prior using DDU. Requirements: .NET Framework 4.8 Compatible with Windows 7, 8, 8.1, 10, and 11 (32-bit or 64-bit) Note: Using on Insider Preview builds is at your own risk. Display Driver Uninstaller (DDU) 18.1.5.5 changelog: Added 'Reset to recommended' button for the Options. General fixes and improvements. Download: Display Driver Uninstaller (DDU) 18.1.5.5 | 1.7 MB (Freeware) Download: DDU Portable | 1.2 MB Links: Display Driver Uninstaller Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • WACUP 1.99.51.24568 Preview by Razvan Serea WACUP (WinAmp Community Update Project) is a modern, enhanced version of the classic Winamp music player, designed for better stability, performance, and compatibility. Built for Windows, WACUP retains the familiar Winamp interface while adding 64-bit support, bug fixes, and new features like improved audio format support, customizable skins, and optimized playlist management. Unlike bloated alternatives, WACUP focuses on lightweight performance and regular updates, making it the best choice for fans of the classic Winamp experience. Basically, if you miss the good old days of Winamp and want a modern upgrade that doesn’t mess things up, WACUP is for you! WACUP key features: Classic Winamp Feel – Keeps the familiar interface and functionality. Bug Fixes & Stability – Fixes old Winamp issues and improves performance. 64-Bit Support – Works better on modern systems. More Formats & Plugins – Supports additional audio formats and third-party plugins. Customizable UI – Skins and tweaks for a personalized look. Better Library Management – Improved playlists, media organization, and search. No Bloat – Focuses on performance without unnecessary extras. Regular Updates – Community-driven development with new features and fixes. WACUP 1.99.51.24568 Preview changelog: Fixed a deadlock seen from the recent crash reports when doing some of the drag + drop actions within the media library window Fixed a loading crash seen related to a problem with some of the artwork cache image files being restored which should now be better handled allowing for the bad image to be removed without it failing Fixed a deadlock seen from the recent crash reports when the internal metadata cache clearing is triggered which could block the main ui thread for too long with this now being moved to a background thread Fixed some performance issues with some of the methods related to determining artwork support which mainly affected the local library import / refresh (this is still slower for some compared to other players because there's more data & artwork aspects being checked for which means doing more processing on a single file despite the best of attempts to reduce duplicate / heavy processing where possible) Fixed a crash with the JTFE based missing files hotkey which no one seems to have used for an age for this to appear (maybe it's time to seriously consider stripping out features that aren't being used) Fixed how some of the file types which use extra information to reference their sub-songs is handled which was preventing some from being correctly resolved back to their base file (noticed fixing above) Fixed an issue with the handling of files with underscores in their filepath which wasn't being correctly handled causing some of the filename to be lost when shown as the title if title reading is delayed Fixed a few things that might be behind NotSoDirect not being stable for some setups though am still not certain that the changes done for this are going to fully resolve the problem from the crash reports Fixed the OS toast handling when there's no prior shortcut in the OS start menu to now create the shortcut (needed to allow the yes/no buttons for the new build / post-release toast) to be done as a hidden one so it's less likely to cause annoyance for those not wanting to see it whilst still allowing this less than ideal OS api implementation requirement to be met to avoid toasts without the needed buttons Fixed a regression when moving from taglib1 to taglib2 which broke some of the handling in place to allow for external programs to still access files when wacup has a held open cached instance of the file Everything else Updated cppwinrt (gen_win10shell.dll) to 3.0.260520.1 (26 May 2026) Updated libcurl (libcurl.dll) to 8.2.1 (24 Jun 2026) Updated Monkey's Audio (in_ape.dll) to 13.15 (28 Jun 2026) Updated mpg123 (mpg123.dll) to 1.33.6 (6 Jun 2026) Updated OpenSSL (libcurl.dll) to 3.5.7 (9 Jun 2026) Updated pugixml to 1.16 (16 Jun 2026) Updated taglib (tag2.dll) to 2.3.0 (11 May 2026) Updated vgmstream (in_vgmstream.dll) to the latest Git commit from 28 Jun 2026 Download: WACUP 64-bit | 9.6 MB (Freeware) Download: WACUP 32-bit View: WACUP Website | Screenshots Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • "over a thousand engineering hours" and started selling it but could not take a couple of minuets to send an AI email to ask permission. What an expensive lesson.
    • just tested it yesterday, a simple page with autoloading ADS takes 60mb....just 1 page for 60 megabytes.   poor people with a limited internet never will visit neolose
  • Recent Achievements

    • Week One Done
      Collagen Project earned a badge
      Week One Done
    • Reacting Well
      Wakeen1966 earned a badge
      Reacting Well
    • Rookie
      Almohandis went up a rank
      Rookie
    • Apprentice
      jahara21 went up a rank
      Apprentice
    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
  • Popular Contributors

    1. 1
      +primortal
      526
    2. 2
      +Edouard
      265
    3. 3
      PsYcHoKiLLa
      146
    4. 4
      Steven P.
      99
    5. 5
      macoman
      55
  • Tell a friend

    Love Neowin? Tell a friend!