Recommended Posts

Might as well do the preload.

Speaking of which, I really need some friends on Origin since AutoLog would otherwise be completely useless :p actually was wondering if Origin's friend list is also used by say Hot Pursuit 2010 and now Most Wanted 2012?

It's used in The Run, sadly Hot Pursuit used its own friends list.

SavagePaladin if ya want to add me, I can always use some competition.

Damn, checking out all the posts in this thread just reminded me, I very well probably will not get my copy on release day. Have this stupid ass storm heading my way. Well I hope I keep my power so I can play it. Hell if it floods and I do have power, I may very well wind up picking up the digital version.

Aye... stupid storm :/

Preload's almost done :D Bit of a complaint about Origin's billing as it added in tax (which I don't mind to an extent) and then presented that price to me, with tax, in USD (that I do mind). Either do it like Steam and don't charge tax but charge in USD, or charge me in CAD with tax. But not both. Anyways...

Who else besides Deranged is grabbing this for PC?

SavagePaladin if ya want to add me, I can always use some competition.

Adding - should see an invite from "rm20010"

The sad thing is I still have Burnout Paradise, Hot Pursuit, and The Run installed...I tried removing the first two since Most Wanted was coming, but then as it came closer to the release date I had to put them back on.

Hah. Maybe they'll be on here forever!

Might as well do the preload.

Speaking of which, I really need some friends on Origin since AutoLog would otherwise be completely useless :p actually was wondering if Origin's friend list is also used by say Hot Pursuit 2010 and now Most Wanted 2012?

Add me in Origin

sanke4

Any Origin users feel free to add me. I want to check how this Autolog works.

How much fps are you guys getting?

It runs like crap for me on nvidia 560gtx non-ti, intel 2500k processor on medium settings.

Tsk tsk tsk, not for another half an hour...

ban_hammer_stickers-p217071316663592890envb3_400.jpg

;)

Well then. It was... interesting.

The early reviews for this game weren't kidding when they said this was a spiritual successor to Burnout Paradise. Because it IS Burnout! The only NFS element that carried over are the cops, and by god they are hard to lose in a 'hunted' event. :| The first cop event I ran into is with the Bentley and your goal is to escape the cops, starting from inside a warehouse. Expect the heavy SUVs from the original Most Wanted and Carbon, and heavy duty SWAT vehicles. One light smack against these and you're taken down.

I'm not sure if the damage system is like Burnout's, where after a certain amount of damage you must run through garages to fix your vehicle before the next smash puts your car out of commission. About the damage system - one hard smack is enough to knock out a vehicle. Including yours. Forget about the older Need for Speeds with their indestructible vehicles. Forget about even Hot Pursuit 2010. These vehicles are much more fragile.

Also I haven't figured out what the penalty is for being busted - I'm assuming they duck a few speed points?

I'd say the sense of speed isn't quite there compared to Hot Pursuit 2010, but it makes up for it with the amount of chaos that goes on. Also, hello chatty and cluttered UI. Autolog works though.

Actually the entire game itself is quite a step up in terms of difficulty, right off the bat. Very easy to screw up and when you screw up, it is epic. :D Really liked the offroad races. But again, easy to screw up.

To address the PC gamers, it could use some tweaking. Ran alright on my computer, with everything on high except for two settings on medium - ambient oclusion and geometry detail. I could throw everything on high but I did notice increased stuttering. Still, even with the settings I had on it did stutter a bit at times, but nothing as disasterous as say Undercover when it first came out. Quick PC specs: Q6600, Geforce GTX 670, 6 GB of RAM, running at 1280x1024. (I know, crap res. I will get a larger monitor soon.)

  • Like 1

Interesting... yes, that's one way to put it. This is not a NFS Game and to soil the name "Most Wanted" is a shame. That said, it runs very well for me I3-2130, evga GTX 560, 8gig of ram @ 1920x1080, I let the game pick the settings, then I lowered or removed "Motion Blur" cant recall. They were all on high I think..

I noticed the difficulty jump as well, the Porsche "easy" difficulty circuit race had me talking to myself. The other racers seem to crash me much more often than I remember, they always seemed to put me into the side of the gas station. Drove me crazy, the steering seems a little sloppier than I remember as well. Maybe my 360 controller is getting old - it's the wired white one, or I'm getting old and slow, or maybe both? Who knows.

I got busted as well after getting into a paint swapping contest with a heavy suv, stopped me dead and then got rear ended by two police cars and got pinned. The "voice" told me something like - "Well you just got busted, next time evade the cops and then hide until the cool down is over" and I was thinking "hey great advice, maybe next time".

Time will tell, I didn't get to play long, but the game is just ok so far. I might put the original Most Wanted back on my pc and have a look at it. The joy of loading 4 cds to install a game.. well my black edition is the 4 cd one. :)

Right, forgot about the latest Geforce driver set (310.33). Wondering if they hid some tweaks in there for Most Wanted, as Nvidia usually does for new hot games.

This game refuses to cooperate well on my iMac, the FPS keeps fluctuating from 44 to 19fps @ 1920x1080, everything at low or off and at 1280x720 i get 60 to 20fps, in my opinion this game is just another bad console port, great selection of cars though.

It's not unlocked for people who actually bought it for another two hours, so I couldn't tell you.

Tsk tsk tsk, not for another half an hour...

ban_hammer_stickers-p217071316663592890envb3_400.jpg

;)

Actually it was in Korea, you could unlock using VPN. Don't just assume people are pirates.

I've had a quick go, going to work soon so I can't really get into it. So far the graphics look great if a bit choppy on my i5 2400, 7850 machine, love the meaty engine sounds and how much weight the cars have, bit disappointed into the arcade drifting but I can see people who don't like simulation games having LOADS of fun.

I have game pre-loaded on Origin. How ethical is it to download the crack and play and discuss the game here? Does EA ban Origin account?

My Origin account says this game will unlock on 2nd November. WTF????????

That's 3 days after the world has completed the game and lost interest in it. :(

To address the PC gamers, it could use some tweaking. Ran alright on my computer, with everything on high except for two settings on medium - ambient oclusion and geometry detail. I could throw everything on high but I did notice increased stuttering. Still, even with the settings I had on it did stutter a bit at times, but nothing as disasterous as say Undercover when it first came out. Quick PC specs: Q6600, Geforce GTX 670, 6 GB of RAM, running at 1280x1024. (I know, crap res. I will get a larger monitor soon.)

:o

I also turned down ambient occlusion and turned off motion blur.

Now I am getting average fps of 42-45 at 1920x1080 resolution (sometimes 55-60) :p

To address the PC gamers, it could use some tweaking. Ran alright on my computer, with everything on high except for two settings on medium - ambient oclusion and geometry detail. I could throw everything on high but I did notice increased stuttering. Still, even with the settings I had on it did stutter a bit at times, but nothing as disasterous as say Undercover when it first came out. Quick PC specs: Q6600, Geforce GTX 670, 6 GB of RAM, running at 1280x1024. (I know, crap res. I will get a larger monitor soon.)

Hoping it's your CPU bogging you down, itd be crazy if a 670 at that res. couldn't handle it on high. The 6600 will really hold you back on a small amount of games.

:o

I also turned down ambient occlusion and turned off motion blur.

Now I am getting average fps of 42-45 at 1920x1080 resolution (sometimes 55-60) :p

Yup same problem i'm having, the fps fluctuation is driving me nuts, which makes controlling the car hard when moving at high speeds.
This topic is now closed to further replies.
  • Posts

    • Onkyo Dolby Atmos AV receivers are really solid deals by Sayan Sen Recently we covered great deals on several soundbar models from the likes of Sony, JBL, Samsung and others for really good prices (the lowest in several months). Aside from that we also reported on the Edifier S3000MKII, a hi-fi two-way bookshelf monitor that's available for only $800. Today we bring a list of AV receivers from Onkyo that are available at great prices including the Onkyo NR7100, RZ30, and 8470 (purchase links under the specs table down below). The Onkyo TX-NR7100 and Onkyo TX-RZ30 are both 9.2-channel AV receivers designed for immersive home theater setups but they occupy slightly different tiers within Onkyo’s lineup with the RZ30 positioned as the more advanced model. The TX-NR7100 is a THX Certified 9.2-channel receiver offering up to 100 W per channel (8 ohms, 2 channels driven). It supports Dolby Atmos, DTS:X, and IMAX Enhanced formats, with flexible configurations such as 5.1.4 or 7.1.2 speaker layouts. A key highlight is its built-in Dirac Live Room Correction which should help optimize sound based on your room and its acoustics. In comparison, both models share several core capabilities though the RZ30 is geared toward enthusiasts seeking more precise calibration and system flexibility, while the NR7100 is positioned as a slightly more accessible, value-focused option with strong all-round performance. The technical specs of the RZ30 and NR7100 9.2 AVRs are given in the table below: Specification Onkyo TX-RZ30 Onkyo TX-NR7100 Power Output (FTC, 2ch driven) ~100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) 100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) Dynamic / Peak Power 9 × 170 W (6Ω, 1kHz, 1% THD, 1ch driven) 220 W/ch (6Ω, 1kHz, 10% THD, 1ch driven) Frequency Response 5 Hz – 100 kHz (+1/-3 dB) 10 Hz – 100 kHz (+1/-3 dB) THD 0.08% 0.08% Room Correction Dirac Live (full bandwidth) Dirac Live (with AccuReflex support) Immersive Audio Dolby Atmos, DTS:X, IMAX Enhanced Dolby Atmos, DTS:X, IMAX Enhanced Speaker Layout Support Up to 7.2.2 / 5.2.4 / 9.2 processing Up to 7.2.4 / 5.2.4 / 9.2 processing HDMI Inputs / Outputs 6 inputs / 2 outputs (eARC) 6 inputs / 2 outputs (Main + Sub/Zone 2) HDMI 2.1 Support 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC Video Formats HDR10+, Dolby Vision, HDCP 2.3 HDR10+, Dolby Vision, HDCP 2.3 Streaming / Network Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Get them at the links below: Onkyo TX-RZ30 9.2-Channel AV Receiver: $797.00 (Sold and shipped by Electronic Expo) Onkyo TX-NR7100 9.2-Channel AV Receiver: $699.00 (Sold and shipped by Adorma) Onkyo TX-8470 2 Ch Stereo Receiver: $449.00 (Sold and Shipped by Adorma) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links or authorized dealer links (at the time of article publishing); ensure that you purchase from such links only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • A different thing with Russia. When you say is it better, depends on things. It is better that we don't have the E.U making rules and laws that have nothing to do with them. Is the trading part better? No, that is really mucked up, but then we knew that was going to happen and we would have make agreements, like we do with other parts of the world. Freedom of movement is certainly better, but could be improved, we still need more control over our borders. do you live in the U.K?
    • So what am I quoting from them? I never listened to what Farage or his cronies said. I wanted the U.K to leave the E.u years before the referendum and it had nothing to do with Farage and his cronies. So what country do you live in? Did we work much better together? We were always at logger heads with the E.U because we disagreed with them so much. Maggie was always on at them. I would have thought the E.U was glad to get rid of us as we stopped the integration or made it a two tier. Now without us they can integrate more. I would not have voted out if it was just a trading block and we can still work together on somethings.
    • MPC-BE 1.9.0 by Razvan Serea Media Player Classic - BE is a free and open source audio and video player for Windows. Media Player Classic - BE is based on the original "Media Player Classic" project (Gabest) and "Media Player Classic Home Cinema" project (Casimir666), contains additional features and bug fixes. The BE mod (Black Edition Mod) is a skinned version of Media Player Classic Home Cinema, much better looking than the plain old MPC. MPC-BE 1.9.0 changelog: Splitters Fixed crashes in some situations. AudioSplitter Added support for the RF64 format. Fixed reading of channel layout for some WavPack files. Added support for ID3 tags for Wave64 files. Unknown Wave64 chunks are now ignored. AviSplitter Added support for 'y408' video. Improved support for 'HEVC' video. FLVSplitter Added support for VVC video. MP4Splitter Improved handling of corrupted files. MatroskaSplitter Expanded support for V_UNCOMPRESSED video codecs. Fixed support for frame rotation (ProjectionPoseRoll). Improved support for "V_MS/VFW/FOURCC / HEVC". MpcDvdVideoDecoder Fixed conversion to YUY2. Fixed display of menus for some DVD-Videos. RoQVideoDecoder Output in NV12 and YV12 formats is allowed. Full range is used. MPC Video Decoder RGB32 format will be output as a top-down bitmap by default. Added support for the "IID_MediaSideDataDOVIMetadataV2" interface. Removed support for the deprecated "IID_MediaSideDataDOVIMetadata" interface. Fixed retrieving the name of the video adapter when using NVDEC. Fixed crashes in some situations. MPC Video Converter Added support for AYUV video format. MpcAudioRenderer Improved input format validation. Optimized retrieval of supported formats for exclusive mode. Added the "Keep audio device active when paused" setting. Fixed crashes and freezes in various situations. Subtitles Added the ability to open the properties of an external subtitle renderer in the "Subtitles" settings panel. Fixed external subtitle connections for VSFilter. Fixed a crash when rendering PGS/SUP subtitles when using AVX2. YouTube Improved support for yt-dlp. The built-in YouTube parser is no longer used. Player The HTTP read strategy has been changed. If the playlist contains one entry, more key combinations can be used to control the player (jump through chapters, adjust volume). Improved support for reading ASX playlists. The translation of the MediaInfo report for Chinese, Korean and Japanese has been removed. Added blocking of 32-bit filter "PICVideo Lossless JPEG Decompressor" (pvljpg20.dll), because it crashes. Added blocking of the system filter "AVI Decompressor", which will eliminate the crash of VFW codecs. Fixed a rare crash when using the "/slave" key. Fixed a crash when getting a list of fonts for OSD. Added the ability to load an external audio file using hotkeys. Fixed opening a network path starting with \?\UNC. The "Determine duration when adding" playlist setting now works for YouTube video URLs. The "Online media services" settings panel has been redesigned. Added a "Merge files using FFmpeg" option to the file saving dialog. This option is activated when playing multiple streams obtained using yt-dlp. Added loading of local .dpl playlists ("DAUMPLAYLIST"). Fixed a hang when the user closes the player during the URL opening process. Various interface fixes. Installer Updated MPC Video Renderer 0.10.5. Updated MPC Script Source 0.2.17. Added MPC Image Source 0.3.6. Translations Updated Japanese translation (by tsubasanouta). Updated Chinese (Traditional) and Dutch translation (by beter). Updated Romanian translation (by Andrei Miloiu). Updated Hungarian translation (by mickey). Updated Turkish translation (by cmhrky). Updated German translation (by Klaus1189). Updated Chinese (Simplified) translation (by wushantao). Updated Italian translation (by mapi68). Updated Korean translation (by Hackjjang). Updated Chinese (Traditional) (by udfbe). Updated libraries dav1d 1.5.3-6-g04b69f9; ffmpeg n8.2-dev-1857-g4653e68aab; libpng git-v1.6.55-9-g7d52a8087; Little-CMS git-lcms2.18-26-gf739cda; MediaInfo git-v26.05-38-g702c9b7fd; ZenLib git-v0.4.41-91-g073f297; zlib 1.3.2. Download: MPC-BE 64-bit | Portable MPC-BE 64-bit | ~20.0 MB (Open Source) Download: MPC-BE 32-bit | Portable MPC-BE 32-bit Link: Media Player Classic - BE Home Page Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Apple reportedly looks to blacklisted Chinese memory chips as RAM prices climb by Karthik Mudaliar Image via Apple Apple is reportedly trying to get a clearance from the Trump administration to buy memory from ChangXin Memory Technologies (CXMT) to get some relief from soaring DRAM prices. As per a report by the Financial Times, Apple approached the Commerce Department more than a month ago and also spoke to other officials and allies in Washington. For starters, CXMT is a company that's already been placed on the Pentagon's list of Chinese military companies. The Chinese company is the country's top DRAM maker. For Apple, the timing is certainly awkward but not surprising. Tim Cook had recently warned that Apple would have to raise prices because AI companies are buying up large amounts of memory for data centers, and just like that, Apple raised MacBook and iPad prices. Micron also recently revealed that customers have committed billions of dollars to secure memory supply years in advance, which shows us how aggressive securing infrastructure has become. This gives suppliers such as Samsung, SK Hynix, and Micron more leverage, while pushing hardware makers to look for alternatives. CXMT is one of those alternatives, but not the simplest one. Apple has spent many years trying to diversify parts of its supply chain away from China, especially for final assembly, while still depending heavily on Chinese manufacturing and suppliers. Even domestic brands from China are moving towards CXMT and YMTC instead of relying on Samsung, Micron, and SK Hynix. For Apple, though, it would invite more scrutiny than local Chinese companies. For now, this is more like a lobbying effort rather than a confirmed supply deal. There's no official statement from either of the parties. What is clearer, though, is the pressure behind such a request. AI demand has certainly made hardware a bottleneck, and companies are trying everything they can to bring things back to normal, even if that means making politically sensitive choices. Source: Financial Times
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      493
    2. 2
      +Edouard
      227
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      Steven P.
      75
    5. 5
      FloatingFatMan
      70
  • Tell a friend

    Love Neowin? Tell a friend!