Recommended Posts

Personally I haven't had any issues with Samsung 830 512gb or Crucial M4 256gb / 512gb, but I've also only been on SSDs for about 6 months. Now two of my friends had 128gb OCZ drives that died within a similar time frame, although many others had lots of positive experience with OCZ. I think the technology has matured enough that all manufacturers are probably decent. I looked at MTBF numbers and warranty when choosing my SSDs.

Ironically, my OCZ drive in my laptop just died a few moments ago. About the 6 month mark... It only makes a high pitched whine and won't actually boot or show up as a drive.

My experience isn't anything more than anecdotal evidence, but there you have it.

Regardless of "reliable" or not, every SSD can and will brick eventually. Imagine what happens if you lost the data on it...if you can't handle losing it, then back it up! Buy a standard WD Green and back it up! Use any tool you want - Windows Backup does a great job.

TLDR: Back it up!!

Oh, most 'brand name' (Crucial, OCZ, Samsung, Intel, Corsair) SSDs are good. Some may be a little better, but they all have a reasonable chance to brick on you.

My gut feeling tells me it is a toss up between the Crucial M4 and Samsung 830,

I have a Crucial M4 128GB, it is my first SSD so i dont really have anything to compare it to, and im not going to say its better than the Samsung because that would be biased!

Its just given me no problems, and i know Crucial are very good with their support should anything go wrong.

Regardless of "reliable" or not, every SSD can and will brick eventually. Imagine what happens if you lost the data on it...if you can't handle losing it, then back it up! Buy a standard WD Green and back it up! Use any tool you want - Windows Backup does a great job.

TLDR: Back it up!!

Oh, most 'brand name' (Crucial, OCZ, Samsung, Intel, Corsair) SSDs are good. Some may be a little better, but they all have a reasonable chance to brick on you.

well, yea, obviously. but it's still a PITA when you have to reinstall everything because the OS disk failed. And although every major brand is good, I'm wondering if there's a clear winner anymore. The old Intel controllers were less than 1 percentage point better than the next best but it was still the undisputed champion in reliability. Is there still someone like that anymore with everyone using either Marvell or Sandforce?

My gut feeling tells me it is a toss up between the Crucial M4 and Samsung 830,

I have a Crucial M4 128GB, it is my first SSD so i dont really have anything to compare it to, and im not going to say its better than the Samsung because that would be biased!

Its just given me no problems, and i know Crucial are very good with their support should anything go wrong.

A couple of people have mentioned Samsung, weren't they pretty bad a while ago? Is the current generation much better?

SSDs and other Flash-based storage devices are on the other side of the "reliability" universe: when they die, they die with a sudden bang and you will never, ever be able to extract a single bit from them.

If you want "reliability", you just need to purchase a server-grade hard disk drive. At least, when the end will come for the drive, you will be able to recover something before (and even after) the drive's demise....

SSDs and other Flash-based storage devices are on the other side of the "reliability" universe: when they die, they die with a sudden bang and you will never, ever be able to extract a single bit from them.

If you want "reliability", you just need to purchase a server-grade hard disk drive. At least, when the end will come for the drive, you will be able to recover something before (and even after) the drive's demise....

I would tend to agree, but the performance you get from the SSD is worth the risk of it dying on you. So to protect my self I run an image of my boot / OS drive 3 times a week to an external USB hard drive. My other two machines with SSDs are imaged manually once in a while; but their contents are mostly static so I don't need a weekly backup. Either-way, whether you go with a SSD or a spindle / mechanical drive, you want to have a backup in place if you have important data or just want to save time during recovery.

Ironically, my OCZ drive in my laptop just died a few moments ago. About the 6 month mark... It only makes a high pitched whine and won't actually boot or show up as a drive.

My experience isn't anything more than anecdotal evidence, but there you have it.

Yep, my OCZ drive lived very shortly, and I've had friend's with failed OCZ drives. Some people have good luck with them, and others don't. I can't recommend them at all. My choice is between the Samsung 830 (or newly released 840, although don't know how reliable they are since it's a new model), Crucial M4, and I've had good luck with Intel 320 series. In any case, the lesson is backup all your data, regardless of the brand.

My OCZ disks have been pretty good.

I had one fail on me, but I overwrote the error flags and it just kept on trucking.

I'd recommend OCZ or Samsung. The Samsungs seen quite good, and as you can see, lots of people recommending them :)

Yarp

I have little experience of my own with SSDs but the Sand Disk Extreme 256GB that I have is been more than good. The price was a steal and the speeds are awesome.

I think many of the early SDD issues like reliability and rewrites have been improved by all manufacturers. I would say try to find the best bang for the buck.

And as other guyhere pointed out: Back everything up just in case. In my case, I keep separate file backups from folders I use on the SSD, not the entire drive because I don't mind reinstall eveything again.

My intuition tells me Crucial m4. Fast and a great Marvell controller.

Three-way tie between Crucial m4 (Marvell controller), Intel 330/520 (modded SandForce controller), and Samsung 83x/84x (Samsung MCX controller).

Note that the generic SandForce controller is not listed (along with the generic Marvell controller) - also MIA is the newer version of the OCZ Vertex 4 (modded Marvell controller, different from the controller of the Crucial m4).

On this topic, we have been switching laptops at work over to Samsung 840's but haven't seen any failures or issues yet, albeit we are just starting to convert over and a few months old. The drives are in laptops with 100% data on SSD. Also drives are encrypted with a third party program so that makes more use I suppose.

I have been wanting to switch to SSD myself in the past but have been too gun shy about it because of the relatively short life on them. I have figured the best practice would be to install OS only on SSD and then use HDD for data/programs etc.. Would this in theory bring the life span of the drive to last longer since the amount of writes is less?

I would tend to agree, but the performance you get from the SSD is worth the risk of it dying on you.

It's a choice you have to make. And until SSD drives won't have something more meaningful for data storage like PCM of memristor chips (let's say, within the next five years?), I will always choose to spend the extra money an SSD will cost on a server-grade hard disk drives with spinning platters....

It seems like the general concensus is a toss-up between Crucial M4 and Samsung 830/840. I read on Anandtech that their review units of the 840 Pro both broke, has that been fixed? And are there significant differences between the Marvell controller on Crucial and the Samsung controllers?

It's a choice you have to make. And until SSD drives won't have something more meaningful for data storage like PCM of memristor chips (let's say, within the next five years?), I will always choose to spend the extra money an SSD will cost on a server-grade hard disk drives with spinning platters....

that's assuming that you value reliability above all else.

Plextor M5 Pro

I second that.

The Plextor M3/M5 series are basically Crucial M4s without the firmware problems (legendary Plextor Firmware engineering and QA) and with an included 5 year parts warranty (the 1st 3 years you don't even pay shipping in case of a RMA, they send someone pick up the drive at your doorstep)

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • WACUP 1.99.51.24568 Preview by Razvan Serea WACUP (WinAmp Community Update Project) is a modern, enhanced version of the classic Winamp music player, designed for better stability, performance, and compatibility. Built for Windows, WACUP retains the familiar Winamp interface while adding 64-bit support, bug fixes, and new features like improved audio format support, customizable skins, and optimized playlist management. Unlike bloated alternatives, WACUP focuses on lightweight performance and regular updates, making it the best choice for fans of the classic Winamp experience. Basically, if you miss the good old days of Winamp and want a modern upgrade that doesn’t mess things up, WACUP is for you! WACUP key features: Classic Winamp Feel – Keeps the familiar interface and functionality. Bug Fixes & Stability – Fixes old Winamp issues and improves performance. 64-Bit Support – Works better on modern systems. More Formats & Plugins – Supports additional audio formats and third-party plugins. Customizable UI – Skins and tweaks for a personalized look. Better Library Management – Improved playlists, media organization, and search. No Bloat – Focuses on performance without unnecessary extras. Regular Updates – Community-driven development with new features and fixes. WACUP 1.99.51.24568 Preview changelog: Fixed a deadlock seen from the recent crash reports when doing some of the drag + drop actions within the media library window Fixed a loading crash seen related to a problem with some of the artwork cache image files being restored which should now be better handled allowing for the bad image to be removed without it failing Fixed a deadlock seen from the recent crash reports when the internal metadata cache clearing is triggered which could block the main ui thread for too long with this now being moved to a background thread Fixed some performance issues with some of the methods related to determining artwork support which mainly affected the local library import / refresh (this is still slower for some compared to other players because there's more data & artwork aspects being checked for which means doing more processing on a single file despite the best of attempts to reduce duplicate / heavy processing where possible) Fixed a crash with the JTFE based missing files hotkey which no one seems to have used for an age for this to appear (maybe it's time to seriously consider stripping out features that aren't being used) Fixed how some of the file types which use extra information to reference their sub-songs is handled which was preventing some from being correctly resolved back to their base file (noticed fixing above) Fixed an issue with the handling of files with underscores in their filepath which wasn't being correctly handled causing some of the filename to be lost when shown as the title if title reading is delayed Fixed a few things that might be behind NotSoDirect not being stable for some setups though am still not certain that the changes done for this are going to fully resolve the problem from the crash reports Fixed the OS toast handling when there's no prior shortcut in the OS start menu to now create the shortcut (needed to allow the yes/no buttons for the new build / post-release toast) to be done as a hidden one so it's less likely to cause annoyance for those not wanting to see it whilst still allowing this less than ideal OS api implementation requirement to be met to avoid toasts without the needed buttons Fixed a regression when moving from taglib1 to taglib2 which broke some of the handling in place to allow for external programs to still access files when wacup has a held open cached instance of the file Everything else Updated cppwinrt (gen_win10shell.dll) to 3.0.260520.1 (26 May 2026) Updated libcurl (libcurl.dll) to 8.2.1 (24 Jun 2026) Updated Monkey's Audio (in_ape.dll) to 13.15 (28 Jun 2026) Updated mpg123 (mpg123.dll) to 1.33.6 (6 Jun 2026) Updated OpenSSL (libcurl.dll) to 3.5.7 (9 Jun 2026) Updated pugixml to 1.16 (16 Jun 2026) Updated taglib (tag2.dll) to 2.3.0 (11 May 2026) Updated vgmstream (in_vgmstream.dll) to the latest Git commit from 28 Jun 2026 Download: WACUP 64-bit | 9.6 MB (Freeware) Download: WACUP 32-bit View: WACUP Website | Screenshots Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • "over a thousand engineering hours" and started selling it but could not take a couple of minuets to send an AI email to ask permission. What an expensive lesson.
    • just tested it yesterday, a simple page with autoloading ADS takes 60mb....just 1 page for 60 megabytes.   poor people with a limited internet never will visit neolose
    • Tor Browser 15.0.17 by Razvan Serea Protect your privacy. Defend yourself against network surveillance and traffic analysis. Tor is a network of virtual tunnels that allows people and groups to improve their privacy and security on the Internet. The Tor software protects you by bouncing your communications around a distributed network of relays run by volunteers all around the world: it prevents somebody from watching your Internet connection and learning what sites you visit, it prevents the sites you visit from learning your physical location, and it lets you access sites which are blocked. The Tor Browser Bundle lets you use Tor on Windows, Mac OS X, or Linux without needing to install any software. It can run off a USB flash drive, comes with a pre-configured web browser to protect your anonymity, and is self-contained. Tor Browser 15.0.17 changelog: All Platforms Updated Tor to 0.4.9.11 Updated NoScript to 13.6.25.1984 Build System / All Platforms Bug tor-browser-build#41821: Update gpg subkeys for boklm Bug tor-browser-build#41827: Update morgan's keychain with renewed key Download: Tor Browser (64-bit) | Tor Browser (32-bit) | 109.0 MB (Open Source) View: Tor Browser Website | Other Operating Systems Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Reacting Well
      Wakeen1966 earned a badge
      Reacting Well
    • Rookie
      Almohandis went up a rank
      Rookie
    • Apprentice
      jahara21 went up a rank
      Apprentice
    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      530
    2. 2
      +Edouard
      266
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      Steven P.
      99
    5. 5
      macoman
      56
  • Tell a friend

    Love Neowin? Tell a friend!