• 0

What is using up all my RAM?


Question

This has really gotten me stumped. What process could be eating up all 8GB of my RAM? You can see a screenshot of both task manager and resource monitor but the figures don't seem to add up.

The issue seems to start when playing Battlefield 3 for a while but turning it off doesn't change anything. Could this be some memory leak? If so, how can I determine what exactly is eating all of my RAM up?

Task manager: http://i.imgur.com/21gAN.jpg

Resource monitor: http://i.imgur.com/uz88p.jpg

Resource monitor with basically everything off (no browsers, only apps that should be loaded by default): http://i.imgur.com/QgnYq.jpg

Restarting seems to fix the issue.

Specs, if needed:

Windows 8 Pro x64

Kingston 8GB RAM 1600 MHz (don't recall the name, Genesis I think?)

Intel i5-3570k

Gigabyte GA-Z77X-UD3H (latest BIOS)

AMD Radeon 6950 1GB

Crucial M4 256GB SSD (latest firmware)

Latest updates and stable drivers, no overclocks.

Any help is appreciated. :)

Link to comment
https://www.neowin.net/forum/topic/1120310-what-is-using-up-all-my-ram/
Share on other sites

14 answers to this question

Recommended Posts

  • 0

What happens when you look at the details tab...what do you see when you sort by memory usage?

This is what mine looks like:

Nothing too revealing IMO- http://i.imgur.com/gBfQq.jpg

@+Detection

It's a fresh install so I don't think it'll be polluted already but I'll give it a quick scan anyways. Regarding Event log, unfortunately I have no idea what to look for.

  • 0

@+Detection

It's a fresh install so I don't think it'll be polluted already but I'll give it a quick scan anyways. Regarding Event log, unfortunately I have no idea what to look for.

Check: Windows Logs > System or Windows Logs > Application

Check down the list for warnings or errors or criticals, and see if any of them mention running out of memory space or similar

Might be an idea to clear the logs, cause the problem again, then you`ll be able to see the issue appear in the logs, be easier than searching through them all

  • 0

See what this program says: http://technet.microsoft.com/en-us/sysinternals/ff700229.aspx

Considering what BlendedFrog said, this program will tell you how much RAM drivers are using (something Task Manager / Resource Monitor won't do).

  • 0

Check: Windows Logs > System or Windows Logs > Application

Check down the list for warnings or errors or criticals, and see if any of them mention running out of memory space or similar

Might be an idea to clear the logs, cause the problem again, then you`ll be able to see the issue appear in the logs, be easier than searching through them all

Thanks, I'll check if logs say anything else except "bowser" errors all the time.

See what this program says: http://technet.micro...s/ff700229.aspx

Considering what BlendedFrog said, this program will tell you how much RAM drivers are using (something Task Manager / Resource Monitor won't do).

Thank you! But what exactly should I be looking for in RAMMap? If I sort by RAM usage in Process or File Summary tabs unfortunately there are no culprits showing up.

Screenshots of RAMMap:

http://i.imgur.com/ErMkZ.jpg

http://i.imgur.com/NrTTE.jpg

http://i.imgur.com/YxCBm.jpg

http://i.imgur.com/Cu2Hx.jpg

  • 0

What happens when you look at the details tab...what do you see when you sort by memory usage?

This is what mine looks like:

Holy crap... 201,492 K for Firefox. Good thing computers have lots of RAM these days. I thought it was outrageous for Skype to be using around 70,000 K.

  • 0

From what I can ascertain it sounds like your ATI drivers that are causing the problem with "Nonpaged Pool". What is the memory usage when you look at this?

"Use perfmon to see the pooltag and use findstr to search for the driver which uses this pool tag:"

Go here and here and have a look at what they say.

I may be way off target but perhaps this will at least get you to a point whereby you can start to identify the problem.

  • 0

From what I can ascertain it sounds like your ATI drivers that are causing the problem with "Nonpaged Pool". What is the memory usage when you look at this?

"Use perfmon to see the pooltag and use findstr to search for the driver which uses this pool tag:"

Go here and here and have a look at what they say.

I may be way off target but perhaps this will at least get you to a point whereby you can start to identify the problem.

Thanks, I found these links as well. I did try installing the latest AMD beta drivers but that didn't change anything. Well, unfortunately the tag was MINI and that gave me a gigantic, unscrollable list in Command Prompt. I was able to catch a note towards my LAN driver and apparently there was a newer version available at manufacturer's website (Qualcomm's Atheros line, god is their site awful for finding drivers). Installed it and so far seems good *knock on wood*. I hope that was the reason for the memory leak.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • You do you, I've just said that it first appeared in "home" version before it will be available in "work" one. I use Edge only because it still supports MV2 uBO extension even on Android - I'll switch when they stop.
    • I imagine that was a review or something? My reviews mostly contain a lot of images and galleries, but these are all webp too, but yeah it all adds up on the page load. Would help if you were more helpful with your critique instead of bitching and moaning like a Karen 😂 Because then we might be able to fix it for you.
    • If Valve refused to let them make the case, I wonder if they've already partnered with someone else to do it? The fact that they didn't seek permission/licence before diving straight in is incredible though
    • OpenClaw now has native mobile apps on iOS and Android by Karthik Mudaliar OpenClaw, the viral open-source personal AI agent, now has its own mobile app, available on both Android and iOS. Users can pair the app with an existing OpenClaw gateway and can start using new mobile-native features that are now available on the app. The app supports all the existing features you'd already have seen on OpenClaw's TUI, as well as some more, such as real-time and background Talk mode, action approvals, sharing from iOS, and optional access to device capabilities such as camera, screen, location, photos, contacts, calendar, and reminders. These features are available on both the Android and iOS versions of the app. What's important with these apps is that they don't run OpenClaw on your phone, but are actually just companion apps that require a running OpenClaw Gateway on an existing device, on macOS, Linux, or Windows via WSL2. To pair the app with your existing OpenClaw gateway, users need to run the command "/pair qr" on the TUI or existing chat interface, which brings up a QR code. Users can then scan this QR code to pair it up with the mobile app. There's also an option to manually pair the app by entering the host and a port. Previously, OpenClaw had been available on phones via WhatsApp, Telegram, Slack, Discord, Microsoft Teams, Matrix, and others. Now, with a native mobile app, the interface is much cleaner and more focused on just the OpenClaw, of course, with the added support for camera, screen, location, and more. It's important to note that OpenClaw comes with its own security warnings. There's always a chance of prompt injection with these tools, so users are recommended to double-check authentication, tool policy, sandboxing, and execution approvals rather than prompts alone. For users well-versed with the AI harness, a native mobile app makes it easier to approve an automation, share a link, use voice, or let an agent react to phone-side context.
  • Recent Achievements

    • First Post
      rosiecharles earned a badge
      First Post
    • Reacting Well
      Juan Dela earned a badge
      Reacting Well
    • Week One Done
      Collagen Project earned a badge
      Week One Done
    • Reacting Well
      Wakeen1966 earned a badge
      Reacting Well
    • Rookie
      Almohandis went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      515
    2. 2
      +Edouard
      273
    3. 3
      PsYcHoKiLLa
      143
    4. 4
      Steven P.
      100
    5. 5
      macoman
      54
  • Tell a friend

    Love Neowin? Tell a friend!