Recommended Posts

If I were one of their program managers I'd pulling my hair out by the roots, if they have any left.

http://www.spaceflightnow.com/proton/yamal402/failure.html

Russian satellite launch fails to reach proper orbit

The Russian space industry suffered another malfunction Saturday when the upper stage of the heavy-lift Proton rocket failed to perform the full duration of its final boost-burn, leaving a domestic telecommunications satellite in a lower-than-planned orbit at the end of a 9-hour flight from the Baikonur Cosmodrome.

Launch of the Yamal 402 spacecraft occurred at the precise moment of 1313:43 GMT (8:13:43 a.m. EST) atop the Proton M/Breeze M vehicle combination en route to geosynchronous transfer orbit.

The launch came just after sunset in temperatures just above the freezing mark, but the rocket rapidly disappeared into a low cloud deck within a few seconds of flight.

It was supposed to take 9 hours and 15 minutes to reach the ascent's completion, releasing the 9,839-pound satellite into an highly elliptical orbit expected to range from 4,642 miles at perigee to 22,181 miles at apogee and inclined 9 degrees to the equator.

Getting there began with the six main engines of the 191-foot-tall rocket blasting at liftoff to send the four-stage vehicle in the skies of Kazakhstan.

The lower three stages that comprised the Proton core vehicle sequentially fired through the initial 10 minutes of flight, leaving the Breeze M upper stage to step through four burns over the next several hours to achieve a preliminary parking orbit before heading into intermediate orbits to hit the geosynchronous transfer orbit.

Overseeing the mission was International Launch Services, the commercial marketer of Proton flights. ILS reported that the first three burns by the upper stage and jettison of the donut-shaped auxiliary fuel tank on the Breeze M had been performed, presumably putting the vehicle into a 317-mile by 22,147-mile orbit inclined 48 degrees to the equator within four hours of liftoff.

The rocket would then coast away from Earth for nearly five hours until the Breeze M would re-start its engine for a fourth and final burn of the day, raising the orbit's low point from 317 miles to 4,642 miles and bringing the inclination down from 48 degrees to 9 degrees relative to the equator where it ultimately would be stationed.

But instead of delivering nearly 9 minutes of propulsion as planned, the burn lasted several minutes short of that, leaving the satellite in the "off-nominal" orbit, according to a statement released by Proton rocket-builder Khrunichev.

International Launch Services did not issue a statement by press time. A company spokesperson did not respond to questions Saturday night.

Yamal 402 was supposed to maneuver itself into a circular geosynchronous orbit 22,300 miles up and lowering inclination where it can match Earth's rotation and appear parked over the equator at 55 degrees East longitude to begin a 15-year service life.

Whether the spacecraft has enough fuel to overcome the rocket problem and still have a sufficient reserve for its 15-year mission life was not immediately known Saturday.

>

>

Link to comment
https://www.neowin.net/forum/topic/1124582-another-russian-rocket-fail/
Share on other sites

Well, we came close ourselves recently when a Centaur 2nd stage had a failure that almost caused a satellite loss due to a significant reduction in thrust and a guidance problem. The investigation grounded both the Atlas-Centaur and Delta-Centaur launches and just concluded.

Result: there was a partial burn-through of the engine near the throat of the RL10 engines combustion chamber. This took out one of its surrounding fuel lines which leaked into the chamber, causing both a reduction in thrust and a thrust asymmetry that required constant course correction.

Centaur's guidance pulled it off, and the engine fortunately didn't totally blow.

Then there was the failure of a Merlin 1C engines fuel dome on the last Falcon 9 flight. Fortunatel F9 has 9 engines and each is surrounded by armor plates & blast blankets so the remaining 8 engines and the tanks were protected & survived. The multi-redundant flight computer corrected the course, lengthened the 1st stage burn, and the Dragon spacecraft got to the ISS 30 minutes early. Go figure.

Merlin 1C only has 1 more flight before it's replaced by the totally new Merlin 1D in a new & larger version of F9, so its risk factor is very reduced.

  • 2 months later...

Cause found, and once again it appears quality control related: a bearing failed in the oxidizer turbo-pump.

http://www.spaceflightnow.com/proton/yamal402/130212frob/

Commercial Proton flights cleared to resume in March

An anomaly during a December Proton rocket launch of a Russian communications satellite was caused by the failure of a bearing inside the launcher's Breeze M upper stage, ultimately causing the launcher to release its commercial payload in the wrong orbit, International Launch Services announced Tuesday.

Experts found the most probable root cause of the mishap was a "combination of adverse conditions" leading to the failure of a bearing inside the main engine of the launcher's Breeze M upper stage.

The Dec. 8 launch carried the Yamal 402 communications satellite for Gazprom Space Systems, a division of Russian oil and gas producer Gazprom.

After lifting off from the Baikonur Cosmodrome in Kazakhstan, the three-stage Proton rocket boosted a Breeze M upper stage and the Yamal 402 satellite on an arcing suborbital trajectory. The Breeze M engine was supposed to fire four times to place the payload in an elliptical transfer orbit.

But the Breeze M's fourth burn, which was scheduled to last nine minutes, ended about four minutes early when a bearing failed on the oxidizer side of the main engine's turbopump, according to engineers who examined data from the mission.

The "adverse conditions" affected the Breeze M during the start of the upper stage's third burn, but the engine bearing did not fail until the fourth burn about five hours later.

The upper stage deployed Yamal 402 in the wrong orbit, and the satellite used its own propulsion system to reach its operational position 22,300 miles over the equator. But the satellite used more fuel than originally planned, shortening its projected lifetime from 15 years to 11 years, according to industry sources.

A Russian board of inquiry finished its investigation into the mishap in January, and U.S.-based International Launch Services, which manages commercial Proton/Breeze M missions, convened an oversight committee to review the results.

The ILS oversight board agreed with the Russian commission and approved plans to resume commercial Proton/Breeze M launches in March.

The Dec. 8 launch mishap marked the third problematic Proton/Breeze M launch since August 2011.

>

  • 3 months later...

http://www.sea-launch.com/missions-q11349-Failure_Review_Oversight_Board.aspx

Failure Review Oversight Board

Following the unsuccessful launch of the SL-48 mission on January 31, 2013, Sea Launch and Energia Logistics Ltd. (ELUS) formed a Failure Review Oversight Board (FROB) to review the contractor findings and agree on root cause and appropriate corrective actions to prevent recurrence. The FROB is led by ELUS Chief Operating Officer Kirk Pysher, along with Co-chairman Dr. Valery Aliev, ELUS Executive Vice President and Mission Director, and Rick Pudil, ELUS Chief Systems Engineer.

ELUS has secured the participation of various technical consultants to support the FROB review, who encompass broad knowledge and extensive experience with launch vehicle technical and program matters (including prior Sea Launch experience), as well as subject matter expertise. In addition, customer participants from three global satellite operators participated in the FROB review.

On April 25, 2013, the FROB completed its review of investigations into the failed launch attempt. The investigations into the cause of the failure covered the entire Sea Launch complex to ensure all contributors to the failure were properly identified.

The investigations isolated the failure to the Zenit-3SL first stage hydraulic power supply unit (BIM) used to pressurize the RD-171M main engine gimbal actuators. No additional contributors to the failure were found. The BIM failed approximately 3.9 seconds into the flight due to the abnormal performance of the pump that?s function is to pressurize the hydraulic oil supplied to the RD-171M main engine gimbal actuators. The pump failure was the result of contributing factors associated with a pump manufacturing process that proved difficult to control.

The FROB confirms that the investigation has properly identified the cause of the failure and that the identified corrective actions will eliminate the possibility of recurrence going forward. Pending implementation of the identified corrective actions, the Sea Launch Zenit 3SL is ready to return to flight.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Why you need to take back control of your synced passwords and how to go about doing that by Paul Hill Credit: Pixabay Last month, when Google decided to introduce daily and weekly caps for Gemini, it reignited an anxiety of mine, that you can’t really depend on service providers to maintain features forever, and it got me looking into free software (as in freedom) in other areas too. One app I quickly came across was KeePassXC on desktop and KeePassDX on Android as an alternative to password manager lock-in within the Chrome or Firefox ecosystems. I personally like to switch around with browsers, and using either password manager is inconvenient, so something like KeePassXC was interesting to me. The main issue with it now is syncing; I was not sure how to do that. After a bit of research, I came across Syncthing, a tool I was vaguely familiar with but had never used because it seemed complicated. However, I was completely wrong, and honestly, I think everyone should use it if they use multiple devices. It essentially lets you share folders peer to peer across all of your devices, no cloud services that you don’t control necessary! And it was fairly simple to set up, if not a bit clunky. Since setting it up, I’ve also started using Syncthing to back up other apps too, so don’t think it’s limited to just saving password databases. You can use it for pretty much anything you use Dropbox or Google Drive for. Before continuing to talk about those apps a bit more, let’s walk back a bit and talk about browser sync. Ever since the late 2000s and early 2010s, really, since we have been using smartphones, browser sync has been a necessity of life. I don’t know about you, but I have hundreds of passwords saved. For the most part, they’re all unique, so I don’t remember them and rely on software to manage them for me. Until recently, I’ve relied on password managers in Chrome and Firefox, but what I always found annoying was that it can be hard to transfer them between browsers. Sure, on Windows it is simple enough, but on Linux, exporting bookmarks has been temperamental. It works OK nowadays, but not too long ago, Chrome required you to enable exporting passwords in chrome://flags. The situation is even worse on mobile; there is no exporting or importing of passwords of any kind. You literally have to do it on a desktop, which is incredibly annoying in our mobile-first world. Sync also lets us take out bookmarks, history, tabs, and autofill data easily. To enable sync, it’s just a matter of signing into the browser once, and it handles the rest. It’s nice and easy. Obviously, all this has some issues, including those I’ve outlined above about it being hard to transfer data between browsers, but also things such as account suspension, lost account passwords, and other lock-in mechanisms, such as passkeys, being tied to a specific browser. On a sidenote, I have just removed all of my passkeys because they can make it harder to move browsers. I think the biggest threat to your synced passwords, especially if doing this with Google, is having your account suspended. I don’t ever expect mine to be suspended, but you do hear horror stories on Reddit where people lose access to their Google accounts. Imagine if you have hundreds of passwords, then suddenly lose access to them because Google froze your account, what would you do? So yes, it can be nice to use these syncing services for their convenience, but they also have risks. You may have seen me going on about free software quite a bit in my editorials. It’s essentially a concept championed by the Free Software Foundation. It’s software under particular licenses that grant you four freedoms: run the program for any purpose (0), study and change the source code (1), redistribute copies to others (2), and the freedom to distribute modified copies to others (3). For example, if there is an app I use and one day it gets abandoned by the developer, I can keep running it or even clone the software and continue developing it. Look at the myriad of cool services Google has run over the years before killing them. You can’t take the source code for those because they are proprietary, for the most part. Both KeePassXC and Syncthing are free software, so I get the freedoms listed above. In my use case where I’m syncing a database full of my passwords, I also get proper ownership over my data, there is no losing access to the database due to a frozen account, I can access the code of the tools I’m using, and I can get support from real people online if I run into issues, rather than having to consult a vague help page from an opaque company. With the KeePassXC password manager, you create a .kdbx file, which is what will be synced between devices. KeePassXC has cross-platform apps and also has browser extensions so that the browser can fetch passwords from the database once it is unlocked. Meanwhile, Syncthing is a peer-to-peer file sync tool where you can select folders to sync between your devices. Just pop files in the folders you choose, and then they will be available across your other devices whenever they come online. Syncthing is resilient as it works over both LAN and the internet and only ever sends content between your devices, never to a third-party server somewhere else. By combining these two pieces of software, you can essentially replicate the browser sync functionality. I have had a weird, conflicting issue where a new file is appearing, but it doesn’t seem to be impacting my main password database, which is updating between devices just fine. If you want to get a setup similar to what I have, you will need to go here to download KeePassXC for your computer. Once you have that, you will need to download your passwords from your web browser to a CSV file. In Chrome, you can type chrome://password-manager/settings into the URL bar, and you should see an option to download your passwords under Export Passwords. This will give you the CSV file you need for importing into KeePassXC. If you use a different browser, just use a search engine and type “browser-name export passwords” and muddle along. In KeePassXC, you’ll want to press Import File from the home screen, select the CSV file, and create a new database from it. On one of the screens of the wizard, there will be a Title field with a drop-down selected to none. Change this to Title and continue. You’ll select a name for the database, the encryption level (the defaults are fine), and then you will pick a password. I would choose four unrelated words that are easy for you to remember, as you’ll be typing them fairly often to access your passwords. When you have all your passwords in your new database, you will want to set up the browser extension so that your browser can fetch passwords from KeePassXC. Rather than explain how to do that here, refer to KeePassXC’s guide on how to set it up properly. Once you’ve got that set up, you want to install KeePassDX on Android. You can grab it on the F-Droid store and the Google Play Store. For iPhone users, there are other .kdbx-supporting apps, but I haven’t tried any of them, so have a look around and use what suits you. Once you have that done, you will want to install Syncthing on your computer and find a third-party app for your mobile device. On Android, I use an app called BasicSync; there are also options for iOS, but again, I’ve not tried these. Once you’ve got SyncThing, you’ll want to set it up and connect all of your devices together and share a folder between your gadgets. PCWorld has a good tutorial on setting up a synchronized file between your devices using SyncThing. Once you’ve set it up, congrats, you’ll never have to touch that stuff again except for adding or removing devices. I’ll be honest, I didn’t particularly like setting up Syncthing. It didn’t take me a massive amount of time, but I think I had to check online because I found it a bit confusing. That said, I’ve had it running for several weeks now and never need to touch the Syncthing settings, so that’s very nice. I also mentioned a conflicting file. I’m not sure why this is appearing, but the main .kdbx file seems to be updating and syncing just fine. What’s nice is that both KeePassXC and Syncthing are free software, so they won’t just vanish one day; you can take the code and fork the project or use a range of alternative implementations that others have made. It’s also nice that it works over LAN, so even if your ISP is having problems, your passwords will still sync. One area where you will want to be a bit more careful with this setup is if you only have one device. I am OK because I have a computer and two phones, all synced up. If you just have one device, you will probably want to store a backup of your .kdbx file somewhere else. Obviously, you’ll also want to remember your password really well, too. If you get locked out, it's game over. Overall, if you want to take back control of your computing from big tech, taking control of your passwords is an important part of this. You don’t need to immediately clear out your browser’s password manager; try running KeePassXC and the password manager concurrently for a while to see if you run into any problems. If you do try this out, let us know some other creative ways to use Syncthing. I haven’t really come up with a solution about what to do with my bookmarks, for example.
    • If the price was a dollar, someone would complain "Why isn't it free?" If it was free, someone would complain they weren't being paid to play it.
    • That lens of history will burn if you hold it at the right angle... Warn users too late: Shame, Microsoft! That extremely minor update to an obscure Control Panel widget required 2 years of warning. Warn users too early: Shame, Microsoft! We've got better things to do. Pipeline and process be damned, we'll just always be disappointed, eh?
    • Microsoft Paint used to be my favorite Windows app as a kid, and it's still pretty good by Usama Jawad I have been using Windows since the early 2000s, when I was around 10 years old or so. I vaguely remember playing around with Windows 98 and Windows 2000, but that may have been on school PCs which had old operating systems installed. My main OS on the home PC, and the one I recall spending most time with, was Windows XP. At that time, I used the home PC to create Word and PowerPoint documents for school, but a lot of the time, I simply used it to play games. My dad would bring game discs which we would try and install on the PC, sometimes unsuccessfully, and sometimes, we would rely on flash games in the browser, like Bubble Trouble on Miniclip. However, the problem with the latter approach was the internet speed. On a good day, our dial-up internet would offer us speeds of 56 kbps, but on most days, it was closer to 33 kbps. This did not facilitate online gaming as I would often have to wait minutes for a game to load or "draw" on the screen, and trying to download pirated games wasn't simple either. I remember getting tired of waiting for online games to load and just downloading simulator games from the Big Fish Games website instead, only to be disappointed after finding out that I was just being given access to trial versions of the title, and I needed to fork out money to pay for the full version. All of this is to say that it wasn't very easy to find entertainment options on the home PC when I was a kid, due to a number of reasons, mostly outside of my control. This situation pushed me towards a rather unconventional ally: Microsoft Paint. Whenever the internet wasn't working as good as I expected, I would simply spin up Paint and draw complete rubbish on the canvas. Of course, that wasn't always the intention, but it usually happened when I messed up drawing a straight line or something, and then I would give up on that particular piece and simply draw a random collection of objects. Microsoft Paint was extremely accessible and easy to use. Even if you weren't an artist, you could quickly understand the tools at your disposal and how to leverage them on a canvas. The absolute breadth on offer ensured that each painting was truly unique, as you could utilize various combinations of tools like the pencil, paint, spray paint, and more to truly personalize your creation. Since I wasn't particularly good at drawing both on digital screen or a physical screen, I remember that my main style of art would be to insert a bunch of randomly intersecting lines and then fill them with random colors through the paint can. I have trying to replicate that art style in the latest version of Paint below, and as you can see, it's truly Pablo Picasso-esque. The human imagination truly knows no bounds Microsoft Paint kept me occupied for hours and was my best friend when video games on the home PC were inaccessible for one reason or the other. There was no academic or professional reason for which I would need to use Paint, but I still loved using it in my personal time, even if what I created wasn't worth being shown to anyone. It was simply fun. Fast-forward to today, and the situation is mostly the same. Now that I am almost 29 years old, and I still have no reason to use Microsoft Paint in a professional capacity. In fact, I don't even use it in a personal capacity, except to dabble with it from time to time, just to see if core functionalities are still intact. And I'm happy to say that I think Microsoft Paint still offers the same accessibility and inviting experience that it did to me a couple of decades ago, even though its UX has been refreshed and it's been integrated with Copilot features. Interestingly, things could have been a lot different, had Microsoft had its way. Microsoft Paint was marked for deprecation with the Windows 10 Fall Creators Update in 2017, and even began displaying a product retirement alert, urging customers to shift to Paint 3D instead. Fortunately, after consumer backlash, Microsoft reversed course on this decision, and Paint continues to be a native app inside Windows installations that can also be updated quite frequently through the Microsoft Store. Instead, Paint 3D ended up on the chopping block, which is for the better, I think. I have intermittently played around with Microsoft's refreshed Paint experience in the past few years, and I do think it has received worthwhile upgrades. the UI and the UX has been modernized while retaining core functionality, and the app is still fairly easy to use. It doesn't meet any of my use-cases, but I've never really had any use-cases ever, as described previously. Of course, the elephant in the room is the Copilot integration. Personally, I believe that this is one place where Copilot does make sense, environmental concerns aside. I know that a lot of creatives use AI to generate images, and while some may be using professional alternatives, Paint still offers a decent casual experience, with the power of Copilot. Of course, you do need to have a valid Microsoft 365 Copilot license and available credits to use it, but even if you don't, you still get the big Copilot button in the toolbar, unfortunately. All in all, I am glad that Microsoft Paint continues to be a native feature in Windows 11, and a piece of software that has evolved to meet modern needs without cutting off its own roots. It's just an iconic piece of Windows history that was an essential part of my childhood, and while I don't use it anymore, I'm just glad it is still there.
    • 2TB WD_Black SN7100 PCIe Gen4 NVMe SSD drops to its lowest price in over three months by Fiza Ali Amazon is currently offering the 2TB WD_Black SN7100 internal solid-state drive at its lowest price in over three months, so you may want to check it out, if you have been considering a storage upgrade, before the deal dries up (purchase link is toward the end of the article). Featuring a PCIe Gen 4.0 interface and M.2 2280 form factor, the SN7100 promises to deliver sequential read speeds of up to 7,250MB/s and sequential write speeds reaching 6,900MB/s, offering as much as a 35% improvement in performance compared with the previous generation. It also achieves random read speeds of 1,000,000 IOPS and random write speeds of 1,400,000 IOPS. The drive uses Western Digital’s TLC 3D NAND technology for reliable performance and is further supported by a five-year limited warranty. It also offers strong endurance, rated at up to 1,200TBW, making it suitable for demanding workloads such as gaming, content creation, and high-speed recording. Moreover, its DRAM-less architecture claims to improve power efficiency (the SSD relies on system memory for caching via HMB), while the WD_Black Dashboard software enables users to monitor drive health, install firmware updates, and activate Game Mode for potentially better performance. Finally, it operates within an operating temperature range of 0°C to 85°C, and can withstand storage temperatures from -40°C to 85°C. 2TB WD_Black SN7100 PCIe Gen4 NVMe SSD: $242.96 (Amazon US) Check this deal out if you want a 4TB option. Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • Week One Done
      Supreme Spray LV earned a badge
      Week One Done
    • One Month Later
      Genuinetonerink- Dubai earned a badge
      One Month Later
    • Week One Done
      Genuinetonerink- Dubai earned a badge
      Week One Done
    • One Year In
      hhgygy earned a badge
      One Year In
    • Week One Done
      AMV earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      514
    2. 2
      +Edouard
      163
    3. 3
      PsYcHoKiLLa
      87
    4. 4
      Steven P.
      74
    5. 5
      Michael Scrip
      73
  • Tell a friend

    Love Neowin? Tell a friend!