Recommended Posts

A ?vampire? skeleton has been unearthed in England. The skeleton, which is estimated to be as much as 1,500 years old, was discovered bound in irons, with metal spikes through its shoulders, heart and ankles, according to a new report from Southwell Archaeology.

The skeleton was originally discovered by archaeologist Charles Daniels back in 1959, while hunting for Roman ruins in the ancient town of Southwell, Nottinghamshire in England. What he found was a skeleton who was given the full anti-vampire treatment ? suggesting that the person who belonged to the skeleton was dangerous when alive, according to the Daily Mail. John Lock, chairman of Southwell Archaeology, told The Telegraph, that the body was one of a handful of such burials to be found in the UK.

New details of the burial were published in the journal Southwell Archaeology. As reported in the Daily Mail, the remains are believed to be the result of a ?deviant burial?, an ancient rite reserved for those considered to be the ?dangerous dead?, which, according to the report?s author Matthew Beresford, were those people who were suspected of being vampires.

But as the Telegraph notes, there are vampires and then there?s vampires. As Beresford says in his report: ?The classic portrayal of the dangerous dead (more commonly known today as a vampire) is an undead corpse arising from the grave? ? not quite the image of pallid yet oddly charismatic undead we?re used to. And as Beresford continues, the body was probably not even that of a suspected vampire but of someone accused of more terrestrial crimes. ?Throughout the Anglo-Saxon period the punishment of being buried in water-logged ground, face down, decapitated, staked or otherwise was reserved for thieves, murderers or traitors or later for those deviants who did not conform to societies rules: adulterers, disrupters of the peace, the unpious or oath breaker. Which of these the Southwell deviant was we will never know.?

source

Link to comment
https://www.neowin.net/forum/topic/1127978-what-to-do-with-your-dead-vampire/
Share on other sites

Considering the timeframe it could just be someone that had misshapen teeth. Back then you were burned as a witch for knowing 1 + 1 so I'm guessing he wasn't at all dangerous.

On a side note see how civilized people are treated when a town / city / country is run by religion

?Throughout the Anglo-Saxon period the punishment of being buried in water-logged ground, face down, decapitated, staked or otherwise was reserved for thieves, murderers or traitors or later for those deviants who did not conform to societies rules: adulterers, disrupters of the peace, the unpious or oath breaker."

Considering the timeframe it could just be someone that had misshapen teeth. Back then you were burned as a witch for knowing 1 + 1 so I'm guessing he wasn't at all dangerous.

On a side note see how civilized people are treated when a town / city / country is run by religion

?Throughout the Anglo-Saxon period the punishment of being buried in water-logged ground, face down, decapitated, staked or otherwise was reserved for thieves, murderers or traitors or later for those deviants who did not conform to societies rules: adulterers, disrupters of the peace, the unpious or oath breaker."

This doesn't make any sense. Vampire is more logical.

OK take the word Vampire out of the story the use of which is pure spin and what you have is less of a speculation.So we are talking the Celtic period of history who have just invaded the UK [600BC-50AD] with their Druid priests and many sacrifice rituals especialy enemy leaders and such.They were noted to cut off enemy heads and wear them as trophys on their belts or hanging from door posts outside their wooden huts.

What I find is strange is that I tried to do a Google Search on -- Charles Daniels 1959 England... and All I keep getting is Charlie Daniels the singer.

But after removing Singer Country Charlie Find this article from 2009 about the same site.

http://www.newarkadvertiser.co.uk/articles/news/Half-a-century-of-digging-for-clues

Then again I have read other accounts that some feared that people who died from the Black Death early on that people thought they would come back to life so they were even given this treatment.

The other question is if this were a "Vampire" thought individual then why not the Face down burial that was persistent in the treatment of individuals thought to have it?

Considering the timeframe it could just be someone that had misshapen teeth. Back then you were burned as a witch for knowing 1 + 1 so I'm guessing he wasn't at all dangerous.

On a side note see how civilized people are treated when a town / city / country is run by religion.

It has nothing to do with religion. In fact, the church in the Middle Ages was the biggest force in trying to dispel superstition.

The general desire of the Catholic Church's clergy to check fanaticism about witchcraft and necromancy is shown in the decrees of the Council of Paderborn which in 785 explicitly outlawed condemning people as witches, and condemned to death anyone who burnt a witch. Emperor Charlemagne later confirmed the law. The Council of Frankfurt in 794, called by Charlemagne, was also very explicit in condemning "the persecution of alleged witches and wizards", calling the belief in witchcraft "superstitious", and ordering the death penalty for those who presumed to burn witches
http://en.wikipedia.org/wiki/Witch-hunt#Middle_Ages

The early Christians' largest complaint about pagan religion was that the priests were trying to fool the public into thinking they could do magic, they tried to expose pagan priests as frauds.

People are mistaken about the history on this issue.

Anyway superstition always exists, religion or not. That's why you have atheists who believe in ancient aliens, psychic powers, and other paranormal activity.

My first thought about this article was wondering how they knew the people were thought vampires while alive. I read a large part of the belief of vampires was due to the fact that people found buried corpses to be bleeding from the mouth, so its not impossible that the corpses were bound and handled this way after being dug up.

This topic is now closed to further replies.
  • Posts

    • Personally, I’ve found that it’s usually worth investing in the infrastructure you don’t want to replace later, especially cabling. Running Cat6A (or better, depending on your needs) during an upgrade is relatively inexpensive compared to having to re-cable a few years down the road. For switches I try to balance current specs with realistic growth. If my budget allows it Ill choose switches with higher uplink speeds which leaves room for expanding later on, but I don’t necessarily overspend on access ports if the endpoints won’t benefit from them anytime soon. One lesson I’ve learned is that planning for scalability pays off. It’s much easier to add devices, VLANs, or higher-bandwidth workloads when your network infrastructure already supports it than to replace hardware later.  What is your budget like?
    • I hate the term, "future-proof." We saw it back in the 90's / 2000's, if not before. You cannot future-proof anything, since there is no definition of how far into the future you plan on prepping for. Best idea is to tell us what you currently have and what its use is at the moment, and we can then offer ideas about some areas that might need an upgrade and other areas that can be left alone.
    • I can agree that it is being used in a small capacity. I worked for a company where their engineers still used XP, and when asked why it was because their sensor software wasn't compatible with newer operating systems and the software was discontinued so they couldn't upgrade the software. Given that the sensors were still in use by companies, they had to continue using XP to support the sensor, otherwise the price to the company would have gone into the millions or billions. Our response was simple: Ok, you can keep the XP machine. But we're removing it from the network. "But then it can't access the Internet or folder shares!" Yup, kinda the point. If someone wants to continue using an unsecure OS they can do, I have no problem with that. But it should be isolated. Simple. I had a fight with a guy in the engineering department for weeks before he finally relented. But we digress.   What do I plan on doing to commemorate the anniversary? Nothing. I have fond memories of the OS, but at the end of the day it's just an OS. If I had some time I might see if I could install it on my Raspberry Pi for a laugh. But my reflex memory with today's OS ideas would probably get me frustrated and I'd uninstall it after 5 mins.
    • Shutter Encoder 20.2 by Razvan Serea Shutter Encoder is one of the best video converter software and image, audio available today. It has been designed by video editors in order to be as accessible and efficient as possible. It is one of the few free professional tools. Based on FFmpeg, it has the largest codec library available. You can thus convert your files into many different formats. Complete settings for the most advanced Shutter Encoder has a panel containing a large number of settings, in order to define your own choices based on your files and perfect your video or audio output. Well-thought-out settings, with parameters predefined to create files quickly and easily. List of functions Without conversion: Cut without re-encoding, Replace audio, Rewrap, Conform, Merge, Extract, Subtitling, Video inserts Sound conversions: WAV, AIFF, FLAC, MP3, AAC, AC3, OPUS, OGG Editing codecs: DNxHD, DNxHR, Apple ProRes, QT Animation, GoPro CineForm, Uncompressed YUV Output codecs: H.264, H.265, VP9, AV1, OGV Broadcast codecs XDCAM HD422, AVC-Intra 100, XAVC, HAP....and much more. Shutter Encoder 20.2 changelog: Added "Intel Quick Sync" hardware acceleration for Linux Added 'Identify speakers' option for "Audio transcription" function Improved installer package Improved video player performance Improved timecode display with drop-frame videos Improved naming convention for surround audio files Fixed splash screen freeze Fixed bug with file hanging Fixed bugs with presets loading Fixed bugs with video player's buffer Fixed bug with 'Total length of file' option Fixed bugs with 'Record screen/device' option Fixed bug with "XAVC" & "XAVC Long GOP" functions Rollback to XPDF tool for PDF conversion Removed unused binary architecture for Mac Various corrections Various improvements Download: Shutter Encoder 20.2 | 166.0 MB (Open Source) Download: Shutter Encoder Portable | 185.0 MB Links: Shutter Encoder Home Page | FAQ / Tips | macOS | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • did you give it permission to do so? its probably on the ToS. After that South Park episode I'm paying attention to them lol
  • Recent Achievements

    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      534
    2. 2
      +Edouard
      265
    3. 3
      PsYcHoKiLLa
      152
    4. 4
      Steven P.
      99
    5. 5
      macoman
      66
  • Tell a friend

    Love Neowin? Tell a friend!