15 Free File Copy Tools Tested, poor Windows 8 performance


Recommended Posts

15 Free File Copy Tools Tested for the Fastest Transfer Speeds

Most of us know that it is possible to copy or move files and folders in Windows by either using your mouse to copy and paste, drag and drop or by using the keyboard. Obviously the single biggest factor affecting the speed of any transfer is what you?re copying from or to such as hard drives, SSD?s, USB sticks, network etc. Another factor is how Windows itself deals with these operations, and all versions of Windows have never been quite as efficient at it as they could be.

With this in mind, it is entirely possible to shorten the duration of any copying or moving of files if you use a piece of third party software to take over operations instead of relying on the Windows built-in function. Not only can this help the speed of transfers, but you can also get other benefits like better information, queuing copies, pausing, skipping, and dealing with problem files far better than what Windows does.

We were curious to find out just how fast some of these programs actually are when copying and moving files around in Windows, so have gathered together 15 freeware tools to have a closer look. A few simple tests were carried out to try and determine which file copying tools are the fastest at performing file transfers in a few different real world scenarios. To try and cover some common file copy operations, 3 tests were conducted;

Test 1: Copies a number of small to medium files from one HDD to another.

4GB totaling 24,185 files / 6193 folders with sizes of a few bytes to 320MB.

Test 2: Copy 2 large files using the same source and destination as test 1.

2x Windows 8 ISO?s (x86 and x64) totaling 5.8GB.

Test 3: Copy over a 10/100 LAN network to the same destination as tests 1 and 2.

450MB totaling 5665 files / 723 folders with sizes of a few bytes to 320MB.

The source drive was a 10,000 RPM WD Raptor and the destination was a standard 7200 RPM SATA drive, both defragged. All the 3rd party software was run using their default transfer settings on Windows 7 64-bit. Each test was run twice and an average of the times was taken.

Full test:

http://www.raymond.cc/blog/12-file-copy-software-tested-for-fastest-transfer-speed/

Interesting and useful article, with one surprising result concerning Windows 8.

Look Windows 8 has it's issues, but performance and stability is not one of them. It works fine for most people and it will be more hardware dependant than anything. A few seconds different isn't going to make much difference.

Look Windows 8 has it's issues, but performance and stability is not one of them. It works fine for most people and it will be more hardware dependant than anything. A few seconds different isn't going to make much difference.

That doesn't mean their isn't value in looking into alternatives. Explorer has never been the fastest method of copying files.

windows 8 beats windows 7 hands down in transfeers, its much much faster

And the ability to pause different transfers, something I loved about Ubuntu, is pretty neat.

  • Like 2

Wouldn't use a third party app to transfer files in amillion years. Seems rather redundant, to me. Even if one was much faster than another, a few seconds out of my life isn't going to kill me. I would see a third party program as just another reason to cause an issue, more than anything else.

I'm quite happy with Windows 7 transfer speed. I move stuff around constantly, usually fairly big downloads, on a regular basis..

Mere seconds to throw half a dozen CDs or more from one drive to another, which I do many times a day,

or half a minute or so for around 25 gigs of vids, so I can't complain.

Wouldn't use a third party app to transfer files in amillion years. Seems rather redundant, to me. Even if one was much faster than another, a few seconds out of my life isn't going to kill me. I would see a third party program as just another reason to cause an issue, more than anything else.

Oh good grief....

Wouldn't use a third party app to transfer files in amillion years. Seems rather redundant, to me. Even if one was much faster than another, a few seconds out of my life isn't going to kill me. I would see a third party program as just another reason to cause an issue, more than anything else.

For me it's for resuming and pausing transfers. What happens when you run out of space with Windows? It just fails, and you have no idea where it left off.

For me it's for resuming and pausing transfers. What happens when you run out of space with Windows? It just fails, and you have no idea where it left off.

That's why I check before starting any file transfers.

Oh goodness. I would never use a third party file copy utility for any claimed improvement on speed. I might use one for features (I use TeraCopy when copying large files to my external, since I can make it do checksum verification).

File copying is a simple operation bottlenecked by hardware. I don't know how you could make it any simpler or faster without compromising some integrity check.

Before this turns into a debate on why anyone would need a third party app fo copying i prefer terracopy have been using it for a few years now always seems to copy faster imo and has more options than the default windows copy which for me is a win win situation.

Look Windows 8 has it's issues, but performance and stability is not one of them. It works fine for most people and it will be more hardware dependant than anything. A few seconds different isn't going to make much difference.

Not the case. Initially Vista's poor performance in movement of data, both on local disk drives and across a network was one of it's most heavily publicised failings, and despite the fact that it was largely fixed in service packs, the image of Vista never truly recovered from that. Performance does matter to people and if 8 is slower for no good reason people will pick up on it. Personally, having had to go back to 7 because of blue screens on 8 I didn't get enough time to truly test it but the general image that I got was that 8 just feels like it has some polish missing.

The only reason I would use a 3rd party app is if I needed a log of successful/unsuccessful transfers, which explorer don't do. I find FTP to be very efficient in this regard, and also great at resuming.

As for the article, I would like to know what hardware it was carried out on, besides a terrible WD 10k RPM drive which when I owned one had same spec as my seagate 7200RPM drive (aside from a touch better random seek).

I have a feeling that an XP-designed machine had better written drivers for the hardware than Windows 8 install did.

My real life example should you care: I upgraded from Windows 7 to windows 8, and both were installed on my SSD, it was a literal upgrade from 7, keeping everything in-tact (yay it worked seamlessly!).

In windows 7 I could transfer files from my network around 30MB/s and write around 30-35MB/s from the SSD. With windows 8 I am hitting well over 60MB/s read and 45-50MB/s write to the exact same drive on the exact same system using all the same cabling from the exact same network source... This wasn't a one-time trial, this is average out over a few years of 7 use and months of 8 use.

I've found teracopy to do a much better job than the win7 copy more often than not it spends an age guessing how long it'll take to copy a file before it even starts copying teracopy on the other hand has no such failings I did try extremecopy pro but found when copying large files over the network it would fail halfway through

I might think windows 8 is a steaming pile but it's pretty clear that the testing is heavily flawed when they said this regarding the slower results for windows 8 "This is explained to a large degree by the Security Essentials antivirus part of Windows Defender scanning every file and slowing everything down"

If you are measuring the performance of multiple operating systems to do the same operation you would naturally want them to be operating as similar to one another as possible, if there's no anti-virus running on 7 and XP then defender should have been disabled for 8.

Windows 8 is faster when copying and pasting files for me than Windows 7 or teracopy ever was.

It's especially faster when copying multiple large files. And you can pause in Windows 8 now too. No need for third party software and certainly no need to read some half-assed test that is fundamentally flawed.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Onkyo Dolby Atmos AV receivers are really solid deals by Sayan Sen Recently we covered great deals on several soundbar models from the likes of Sony, JBL, Samsung and others for really good prices (the lowest in several months). Aside from that we also reported on the Edifier S3000MKII, a hi-fi two-way bookshelf monitor that's available for only $800. Today we bring a list of AV receivers from Onkyo that are available at great prices including the Onkyo NR7100, RZ30, and 8470 (purchase links under the specs table down below). The Onkyo TX-NR7100 and Onkyo TX-RZ30 are both 9.2-channel AV receivers designed for immersive home theater setups but they occupy slightly different tiers within Onkyo’s lineup with the RZ30 positioned as the more advanced model. The TX-NR7100 is a THX Certified 9.2-channel receiver offering up to 100 W per channel (8 ohms, 2 channels driven). It supports Dolby Atmos, DTS:X, and IMAX Enhanced formats, with flexible configurations such as 5.1.4 or 7.1.2 speaker layouts. A key highlight is its built-in Dirac Live Room Correction which should help optimize sound based on your room and its acoustics. In comparison, both models share several core capabilities though the RZ30 is geared toward enthusiasts seeking more precise calibration and system flexibility, while the NR7100 is positioned as a slightly more accessible, value-focused option with strong all-round performance. The technical specs of the RZ30 and NR7100 9.2 AVRs are given in the table below: Specification Onkyo TX-RZ30 Onkyo TX-NR7100 Power Output (FTC, 2ch driven) ~100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) 100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) Dynamic / Peak Power 9 × 170 W (6Ω, 1kHz, 1% THD, 1ch driven) 220 W/ch (6Ω, 1kHz, 10% THD, 1ch driven) Frequency Response 5 Hz – 100 kHz (+1/-3 dB) 10 Hz – 100 kHz (+1/-3 dB) THD 0.08% 0.08% Room Correction Dirac Live (full bandwidth) Dirac Live (with AccuReflex support) Immersive Audio Dolby Atmos, DTS:X, IMAX Enhanced Dolby Atmos, DTS:X, IMAX Enhanced Speaker Layout Support Up to 7.2.2 / 5.2.4 / 9.2 processing Up to 7.2.4 / 5.2.4 / 9.2 processing HDMI Inputs / Outputs 6 inputs / 2 outputs (eARC) 6 inputs / 2 outputs (Main + Sub/Zone 2) HDMI 2.1 Support 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC Video Formats HDR10+, Dolby Vision, HDCP 2.3 HDR10+, Dolby Vision, HDCP 2.3 Streaming / Network Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Get them at the links below: Onkyo TX-RZ30 9.2-Channel AV Receiver: $797.00 (Sold and shipped by Electronic Expo) Onkyo TX-NR7100 9.2-Channel AV Receiver: $699.00 (Sold and shipped by Adorma) Onkyo TX-8470 2 Ch Stereo Receiver: $449.00 (Sold and Shipped by Adorma) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links or authorized dealer links (at the time of article publishing); ensure that you purchase from such links only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • A different thing with Russia. When you say is it better, depends on things. It is better that we don't have the E.U making rules and laws that have nothing to do with them. Is the trading part better? No, that is really mucked up, but then we knew that was going to happen and we would have make agreements, like we do with other parts of the world. Freedom of movement is certainly better, but could be improved, we still need more control over our borders. do you live in the U.K?
    • So what am I quoting from them? I never listened to what Farage or his cronies said. I wanted the U.K to leave the E.u years before the referendum and it had nothing to do with Farage and his cronies. So what country do you live in? Did we work much better together? We were always at logger heads with the E.U because we disagreed with them so much. Maggie was always on at them. I would have thought the E.U was glad to get rid of us as we stopped the integration or made it a two tier. Now without us they can integrate more. I would not have voted out if it was just a trading block and we can still work together on somethings.
    • MPC-BE 1.9.0 by Razvan Serea Media Player Classic - BE is a free and open source audio and video player for Windows. Media Player Classic - BE is based on the original "Media Player Classic" project (Gabest) and "Media Player Classic Home Cinema" project (Casimir666), contains additional features and bug fixes. The BE mod (Black Edition Mod) is a skinned version of Media Player Classic Home Cinema, much better looking than the plain old MPC. MPC-BE 1.9.0 changelog: Splitters Fixed crashes in some situations. AudioSplitter Added support for the RF64 format. Fixed reading of channel layout for some WavPack files. Added support for ID3 tags for Wave64 files. Unknown Wave64 chunks are now ignored. AviSplitter Added support for 'y408' video. Improved support for 'HEVC' video. FLVSplitter Added support for VVC video. MP4Splitter Improved handling of corrupted files. MatroskaSplitter Expanded support for V_UNCOMPRESSED video codecs. Fixed support for frame rotation (ProjectionPoseRoll). Improved support for "V_MS/VFW/FOURCC / HEVC". MpcDvdVideoDecoder Fixed conversion to YUY2. Fixed display of menus for some DVD-Videos. RoQVideoDecoder Output in NV12 and YV12 formats is allowed. Full range is used. MPC Video Decoder RGB32 format will be output as a top-down bitmap by default. Added support for the "IID_MediaSideDataDOVIMetadataV2" interface. Removed support for the deprecated "IID_MediaSideDataDOVIMetadata" interface. Fixed retrieving the name of the video adapter when using NVDEC. Fixed crashes in some situations. MPC Video Converter Added support for AYUV video format. MpcAudioRenderer Improved input format validation. Optimized retrieval of supported formats for exclusive mode. Added the "Keep audio device active when paused" setting. Fixed crashes and freezes in various situations. Subtitles Added the ability to open the properties of an external subtitle renderer in the "Subtitles" settings panel. Fixed external subtitle connections for VSFilter. Fixed a crash when rendering PGS/SUP subtitles when using AVX2. YouTube Improved support for yt-dlp. The built-in YouTube parser is no longer used. Player The HTTP read strategy has been changed. If the playlist contains one entry, more key combinations can be used to control the player (jump through chapters, adjust volume). Improved support for reading ASX playlists. The translation of the MediaInfo report for Chinese, Korean and Japanese has been removed. Added blocking of 32-bit filter "PICVideo Lossless JPEG Decompressor" (pvljpg20.dll), because it crashes. Added blocking of the system filter "AVI Decompressor", which will eliminate the crash of VFW codecs. Fixed a rare crash when using the "/slave" key. Fixed a crash when getting a list of fonts for OSD. Added the ability to load an external audio file using hotkeys. Fixed opening a network path starting with \?\UNC. The "Determine duration when adding" playlist setting now works for YouTube video URLs. The "Online media services" settings panel has been redesigned. Added a "Merge files using FFmpeg" option to the file saving dialog. This option is activated when playing multiple streams obtained using yt-dlp. Added loading of local .dpl playlists ("DAUMPLAYLIST"). Fixed a hang when the user closes the player during the URL opening process. Various interface fixes. Installer Updated MPC Video Renderer 0.10.5. Updated MPC Script Source 0.2.17. Added MPC Image Source 0.3.6. Translations Updated Japanese translation (by tsubasanouta). Updated Chinese (Traditional) and Dutch translation (by beter). Updated Romanian translation (by Andrei Miloiu). Updated Hungarian translation (by mickey). Updated Turkish translation (by cmhrky). Updated German translation (by Klaus1189). Updated Chinese (Simplified) translation (by wushantao). Updated Italian translation (by mapi68). Updated Korean translation (by Hackjjang). Updated Chinese (Traditional) (by udfbe). Updated libraries dav1d 1.5.3-6-g04b69f9; ffmpeg n8.2-dev-1857-g4653e68aab; libpng git-v1.6.55-9-g7d52a8087; Little-CMS git-lcms2.18-26-gf739cda; MediaInfo git-v26.05-38-g702c9b7fd; ZenLib git-v0.4.41-91-g073f297; zlib 1.3.2. Download: MPC-BE 64-bit | Portable MPC-BE 64-bit | ~20.0 MB (Open Source) Download: MPC-BE 32-bit | Portable MPC-BE 32-bit Link: Media Player Classic - BE Home Page Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Apple reportedly looks to blacklisted Chinese memory chips as RAM prices climb by Karthik Mudaliar Image via Apple Apple is reportedly trying to get a clearance from the Trump administration to buy memory from ChangXin Memory Technologies (CXMT) to get some relief from soaring DRAM prices. As per a report by the Financial Times, Apple approached the Commerce Department more than a month ago and also spoke to other officials and allies in Washington. For starters, CXMT is a company that's already been placed on the Pentagon's list of Chinese military companies. The Chinese company is the country's top DRAM maker. For Apple, the timing is certainly awkward but not surprising. Tim Cook had recently warned that Apple would have to raise prices because AI companies are buying up large amounts of memory for data centers, and just like that, Apple raised MacBook and iPad prices. Micron also recently revealed that customers have committed billions of dollars to secure memory supply years in advance, which shows us how aggressive securing infrastructure has become. This gives suppliers such as Samsung, SK Hynix, and Micron more leverage, while pushing hardware makers to look for alternatives. CXMT is one of those alternatives, but not the simplest one. Apple has spent many years trying to diversify parts of its supply chain away from China, especially for final assembly, while still depending heavily on Chinese manufacturing and suppliers. Even domestic brands from China are moving towards CXMT and YMTC instead of relying on Samsung, Micron, and SK Hynix. For Apple, though, it would invite more scrutiny than local Chinese companies. For now, this is more like a lobbying effort rather than a confirmed supply deal. There's no official statement from either of the parties. What is clearer, though, is the pressure behind such a request. AI demand has certainly made hardware a bottleneck, and companies are trying everything they can to bring things back to normal, even if that means making politically sensitive choices. Source: Financial Times
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      498
    2. 2
      +Edouard
      225
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      Steven P.
      74
    5. 5
      FloatingFatMan
      70
  • Tell a friend

    Love Neowin? Tell a friend!