RDP Session, very unstable.. No changes on system or network


Recommended Posts

This is on my home network running Windows Server 2012. My firewall is a pFSense box configured to allow RDP.. I have had this setup for a couple of months with no RDP issues..Nothing has changed on my network or on the server. I use it just to remote in from work to manage things while I am away. I have done some goolging and found about 10000 different possible issues.. Didn't know if anyone here has ran into this.. Everything else on my network is working great.. No Bandwidth issues, good pings.. rebooted the server, modem, switch (managed) and pFsense.. Any ideas come off that might point me in the right direction?

Thanks!

Yes, I tried from my parents house last night and still same thing.. Sometimes it won't even let me login.. When it does, I have about a 1-2 minute window before it drops

Maybe I should use LogMeIn or Team Viewer.. Those are more secure anyway from what I read/been told.. I know there are exploits out there and a VPN + RDP is 1000x better.. maybe its a sign to change my ways at home..lol Suggestions on that?

Yes, I tried from my parents house last night and still same thing.. Sometimes it won't even let me login.. When it does, I have about a 1-2 minute window before it drops

Maybe I should use LogMeIn or Team Viewer.. Those are more secure anyway from what I read/been told.. I know there are exploits out there and a VPN + RDP is 1000x better.. maybe its a sign to change my ways at home..lol Suggestions on that?

RDP should be encrypted already, I wouldn't switch the way I do things because of a technical glitch. Any issues on the RDP Server machine in Event Viewer under System/Application that stand out? Windows Firewall turned off on that machine?

And is anything logged in the 2012 server for the drop?

I rdp to multiple boxes on my home network from work, but I do it over a vpn (openvpn) Problem I have with rdp open to the public net, unless you have it locked down to your work IP or other locations you might access it from in pfsense. Is its just a username password for protection. With my vpn, there is no way your guessing anything to get in - you have to have cert issued to by my CA, etc. And if for some reason I lost say my certs I store on my usb - then I could just revoke that cert and issue new ones.

Are you seeing any packet loss to your pfsense box? Can you get a running ping going, let it run for say 1000 or so pings - do you see drops? Increase the packet size of the pings to max.. Run the same test do you see any loss?

Move rdp to a different port. I had the standard 3389 set on my home network and it was getting constant attacks with attempted logins. This made it fragile to login remotely whereas on the lan it was fine.

The event viewer will show a load of failed authorisations if this is the case.

As of now, I can't even log in anymore..It ask me for my user/pass then drops. I will post logs and everything when I get home.. I can't ping the connection because I have that blocked. Thanks for everyone's help..

I was able to get in, and install Team Viewer.. I looked in the event log and there are a ton of,

TerminalServices-Printers

Driver Send To Microsoft OneNote 2010 Driver required for printer Send To OneNote 2010 is unknown. Contact the administrator to install the driver before you log in again.

Team Viewer is not crashing.. Hm...

Also getting a bunch of,

The Device Setup Manager service entered the running state.

The Device Setup Manager service entered the stopped state. Every two minutes..

Also getting these..

The Windows logon process has unexpectedly terminated.

For testing purposes only, bypass the router and directly connect the server to the internet. If you can RDP no problem, and over your internal LAN like you said with no problem, then it is your firewall hardware.

Instead of using any pre-programmed 'RDP' rules on the router, try forwarding an external port to internal port 3389. Then connect remotely using IPADDRESS:PORT. This will keep you safe from the RDP portscanner hack attempts and bypass the routers pre-programmed rules.

I was able to get in, and install Team Viewer.. I looked in the event log and there are a ton of,

TerminalServices-Printers

Driver Send To Microsoft OneNote 2010 Driver required for printer Send To OneNote 2010 is unknown. Contact the administrator to install the driver before you log in again.

Team Viewer is not crashing.. Hm...

Also getting a bunch of,

The Device Setup Manager service entered the running state.

The Device Setup Manager service entered the stopped state. Every two minutes..

Disable printer forwarding.

I was able to get in, and install Team Viewer.. I looked in the event log and there are a ton of,

TerminalServices-Printers

Driver Send To Microsoft OneNote 2010 Driver required for printer Send To OneNote 2010 is unknown. Contact the administrator to install the driver before you log in again.

Team Viewer is not crashing.. Hm...

Also getting a bunch of,

The Device Setup Manager service entered the running state.

The Device Setup Manager service entered the stopped state. Every two minutes..

Also getting these..

The Windows logon process has unexpectedly terminated.

Change your remote desktop connection to ignore printers under options | local resources.

it sounds like you have some troubleshooting to do on your server.

The Device Setup Manager service entered the running state.

The Device Setup Manager service entered the stopped state. Every two minutes..

Also getting these..

The Windows logon process has unexpectedly terminated.

^ if just a file server and other services that linux/bsd can do then sure pick your fav distro and run with it!

Just the other day I was looking to setup printing on my ipad I got for xmas, uses that stupid bonjour to find the printers. Well I had disabled most of the multicast on my windows box because just not having any need for it. And it was sending a bunch of noise that my gateway firewall was logging so just disabled it.

So since I have a linux VM running on my esxi host 24/7/365 anyway, just installed cups on it - connected it to the printer and there you go ipad can now see the printer being shared by cups ;) Took all of 10 minutes to setup vs having to turn mulicast back on my windows machine that would of generated a bunch of noise that isn't needed to be seen on my network.

linux can be a great solution for a bunch of stuff! Enjoy!

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Dude, im talking about simply disable it from settings app. Because of the eu regulation, you could disable it here for years.
    • One big question about Mars was answered thanks to Einstein's 100 year old theory by Sayan Sen Image via DepositPhotos Scientists at the U.S. National Institute of Standards and Technology (NIST) have calculated how time passes on Mars compared with Earth, adding detail to how timekeeping would need to work beyond Earth’s orbit. The study, published in The Astronomical Journal, found that clocks on Mars run an average of 477 microseconds, or millionths of a second, faster per day than clocks on Earth. A microsecond is one millionth of a second, a very small unit used in precise scientific timing systems such as atomic clocks, which measure time using consistent atomic behavior. This difference is not constant. Because Mars moves around the Sun in a non-circular path (an eccentric orbit, meaning its distance from the Sun changes over time instead of staying fixed) and is affected by gravity from other bodies, the daily difference can vary by as much as 226 microseconds over a Martian year. The study also identifies smaller repeating changes of about 40 microseconds per day linked to synodic cycles (repeating periods that describe how planets line up with each other as they orbit the Sun from different positions). These longer patterns affect how time differences slowly rise and fall. To make these estimates, researchers compared Mars with Earth and the Moon. The work looks at relativistic proper time (the time actually measured by a clock depending on its speed and the strength of gravity where it is located, as described in Einstein’s relativity). This shows that each world has its own slightly different “rate” of time. This becomes more important as space missions expand into cislunar space (the region between Earth and the Moon) and toward Mars. On Earth, time systems rely on atomic clocks and satellites, which stay closely synchronized for navigation and communication. The study is based on Albert Einstein’s theory of relativity, which shows that time is affected by gravity and motion. Stronger gravity makes clocks run slower, while weaker gravity makes them run faster. “The time is just right for the Moon and Mars,” said NIST physicist Bijunath Patla. “This is the closest we have been to realizing the science fiction vision of expanding across the solar system.” A day on Mars is about 40 minutes longer than on Earth, and a Martian year lasts 687 Earth days. But the main question is not just about days and years, but how fast time itself passes. An atomic clock placed on Mars would function normally, but compared with one on Earth, the two would slowly drift apart due to differences in gravity and motion. This requires careful calculation of what is similar to a time-zone difference across planets. Researchers modeled Mars using a reference surface and included gravitational effects from the Sun, Earth, the Moon, and other planets. This includes a multi-body gravitational system (often described as a three-body or four-body problem, where predicting motion becomes difficult because multiple large objects all pull on each other at the same time through gravity). Mars also follows a Keplerian orbit (an idealized elliptical orbit based on simple gravitational laws that assume smooth motion, before adding real-world disturbances from other bodies). In addition, the researchers accounted for solar tides (small changes in gravitational force caused by the Sun that slightly distort planetary motion and timing, especially in systems involving Earth and the Moon). These combined effects are described as relativistic proper-time offsets (small but measurable differences in elapsed time between locations caused by gravity and motion), which must be included when comparing clocks across planets. “But for Mars, that’s not the case. Its distance from the Sun and its eccentric orbit make the variations in time larger. A three-body problem is extremely complicated. Now we’re dealing with four: the Sun, Earth, the Moon and Mars,” Patla explained. “The heavy lifting was more challenging than I initially thought.” Although the differences are extremely small, they matter for navigation and communication systems that depend on precise timing. Even modern networks on Earth, such as mobile systems, rely on timing accuracy at very small fractions of a second. Communication between Earth and Mars currently takes about four to 24 minutes or more depending on planetary positions, meaning signals are not real-time. A shared and accurate time system could help future missions reduce confusion in navigation and data exchange. “If you get synchronization, it will be almost like real-time communication without any loss of information. You don’t have to wait to see what happens,” Patla said. Researchers note that fully developed interplanetary communication networks are still far in the future. However, understanding how time behaves across planets helps prepare for those systems. “It may be decades before the surface of Mars is covered by the tracks of wandering rovers, but it is useful now to study the issues involved in establishing navigation systems on other planets and moons,” said Neil Ashby. “Like current global navigation systems like GPS, these systems will depend on accurate clocks, and the effects on clock rates can be analyzed with the help of Einstein’s general theory of relativity.” Patla added that the results also help improve understanding of time itself under relativity. “It's good to know for the first time what is happening on Mars timewise. Nobody knew that before. It improves our knowledge of the theory itself, the theory of how clocks tick and relativity,” he said. Source: NIST, IOPscience This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing.
    • TeraCopy 4.0 Build 26 by Razvan Serea TeraCopy is a compact program designed to copy and move files at the maximum possible speed, also providing you with a lot of features. Copy files faster. TeraCopy uses dynamically adjusted buffers to reduce seek times. Asynchronous copy speeds up file transfer between two physical hard drives. Pause and resume transfers. Pause copy process at any time to free up system resources and continue with a single click. Error recovery. In case of copy error, TeraCopy will try several times and in the worse case just skips the file, not terminating the entire transfer. Interactive file list. TeraCopy shows failed file transfers and lets you fix the problem and recopy only problem files. Shell integration. TeraCopy can completely replace Explorer copy and move functions, allowing you work with files as usual. TeraCopy is free for non-commercial use only. For commercial use you need to buy a license. The paid version of the program includes the following features: Copy/move to your favorite folders. Save reports as HTML and CSV files. Select files with the same extension/folder. Remove the selected files from the copy queue. TeraCopy 4.0 Build 26 changelog: Added support for receiving files via the LocalSend protocol. Improved exception handling and automated bug report upload. Fixed several minor bugs and small memory leaks. Build 26 (June 24) Fixed a rare exception when a transfer completed. Features added since version 3.17: Enhanced speed graph. New multi-threaded copy engine. Support for copying to multiple targets. Queue system for managing multiple copy operations. Support for receiving files via the LocalSend protocol. TeraCopy entry in the modern Windows Explorer context menu. Integrated toolbar in the title bar. Why receive LocalSend transfers with TeraCopy? Handle file conflicts: Skip, overwrite, or rename files when a file with the same name already exists. LocalSend always creates another copy, which can waste time and disk space, especially when resuming an interrupted transfer. Filter unwanted files: Apply ignore lists or remove files manually before accepting a transfer, so unnecessary files are not downloaded. Better performance on fast networks: In tests over a 10 Gbps connection, TeraCopy received files several times faster than the standard LocalSend app on Windows. Download: TeraCopy 4.0 Build 26 | 14.5 MB (Freeware, paid upgrade available) View: TeraCopy Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Briefly used Turbo Pascal (and Turbo C++) in 97 and soon after that I bought PC magazine that included a full version of Delphi 2. I still use Delphi today, some 29 years later.
    • Age of Empires Mobile comes to PC, here's how to carry over progress from your phone by Ivan Jenic Image: YouTube/Microsoft Microsoft just released Age of Empires Mobile for PC. The game, officially called Age of Empires Mobile: PC Edition, is available for free on Steam and Microsoft Store, almost two years after its initial release for handheld devices. Age of Empires is one of those franchises that entire generations grew up with. The original came out in 1997, and immediately got people hooked to building civilizations and crushing their enemies on the battlefield. However, the franchise today is a far cry from its roots, as Age of Empires Mobile is, well, a game optimized for handheld devices, and not a classic RTS title we’ve all loved for years. And, of course, it includes in-game purchases. The PC version is still a mobile game at its core, but it’s been optimized for desktop play. There’s mouse control, full keyboard compatibility, and a refined UI. Microsoft also refreshed the visuals with some 4k textures, so the game should look better on larger screens. The game supports Crossplay, so you can switch between your phone, tablet, and PC without losing anything. But linked progress doesn’t come out of the box, as you have to enable it first. Here’s how to link your progress: On your mobile device, open Age of Empires Mobile. Go to Settings (Gear icon) > Account. Select Bind Account and choose a sign-in option. Once you enable account binding, sign in on PC using the same method, and your progress will be accessible across all your devices. Xbox Game Pass subscribers also get a bonus reward pack on PC, which includes: 1 Monthly Pass Token 1 Custom Resource Chest 10 Universal 60-Minute Speed-Ups 1,000 Empire Coins Exclusive Player Portrait Frame You can find more info about Age of Empires Mobile: PC Edition, as well as download links, on the Age of Empires official website.
  • Recent Achievements

    • One Year In
      Philsl earned a badge
      One Year In
    • Dedicated
      Scoobystu earned a badge
      Dedicated
    • First Post
      Tom Schmidt earned a badge
      First Post
    • One Month Later
      D0nn13 earned a badge
      One Month Later
    • Rookie
      +ChiefOfNeo went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      458
    2. 2
      +Edouard
      177
    3. 3
      PsYcHoKiLLa
      124
    4. 4
      Michael Scrip
      79
    5. 5
      Xenon
      76
  • Tell a friend

    Love Neowin? Tell a friend!