Wired Xbox 360 controller won't work with my Tab 2 10.1


Recommended Posts

I am trying to connect a wired Xbox 360 controller to my Samsung Galaxy Tab 2 10.1 tablet (running Samsung's stock Android 4.1.1 ROM) via. an OTG adapter.

When I connect it, the following two messages appear:

"High-power USB device connected."

"Can not access to this device. "Connected device needs power supply."

Due to this, USB/BT Joystick Centre can't detect the controller.

Due to the poor English in the second message, I am presuming it's a Samsung ROM issue, rather than an Android/a tablet hardware issue.

Any ideas?

Seems like the error message gives the problem quite clearly to me...

Hardly. Loads of other Android phone/tablets users have no issues with the controller and their OTG adapter.

And are you saying you think the controller needs to be plugged into the mains? ;) Think.

Not sure if it's the same for your tablet but it don't think my Galaxy Tab 10.1 (the first one) supported the XBox controller until i installed a custom rom that included the necessary kernel modules.

Having said that... both my Nexus 7 and Galaxy Nexus support it without doing anything special. I also haven't needed to use "USB/BT Joystick Center" at all, it just works when detected by Android.

Not sure if it's the same for your tablet but it don't think my Galaxy Tab 10.1 (the first one) supported the XBox controller until i installed a custom rom that included the necessary kernel modules.

Having said that... both my Nexus 7 and Galaxy Nexus support it without doing anything special. I also haven't needed to use "USB/BT Joystick Center" at all, it just works when detected by Android.

Yeah, I had a feeling it was related to the stock Samsung ROM :/

your USB port by default does not support high power output. so it cannot support a high power USB device, aka in this case the xbox controller. just like it wouldn't support most printers who require high power, many external HDD's. and so on.

a custom ROM "MIGHT" be able to change this by sending over spec power to the USB port, at the risk of burning it out.

your USB port by default does not support high power output. so it cannot support a high power USB device, aka in this case the xbox controller. just like it wouldn't support most printers who require high power, many external HDD's. and so on.

a custom ROM "MIGHT" be able to change this by sending over spec power to the USB port, at the risk of burning it out.

I'm surprised the controller is classed as a "high power" device. Sure, the vibration function is what it could be regarding, but I wouldn't if that's disabled.

I'm also annoyed that this tablet apparently can't do it, but many Samsung Galaxy phones support the Xbox 360 controller. Confusing!

Apparently it is a common issue with people attempting to do this however, the USB port is not providing enough power to support using the Xbox 360 controller, I would suggest using Bluetooth and a PS3 controller. (that is what I use on my Tablet and phone.)

)

Apparently it is a common issue with people attempting to do this however, the USB port is not providing enough power to support using the Xbox 360 controller, I would suggest using Bluetooth and a PS3 controller. (that is what I use on my Tablet and phone.)

)

I can't really afford a PlayStation 3 controller.

Thank you for your help, guys :)

Hardly. Loads of other Android phone/tablets users have no issues with the controller and their OTG adapter.

And are you saying you think the controller needs to be plugged into the mains? ;) Think.

It should work if you use a powered USB hub. 360 controllers (even the wireless dongle for Windows) use a ridiculous amount of USB power.

It should work if you use a powered USB hub. 360 controllers (even the wireless dongle for Windows) use a ridiculous amount of USB power.

The wireless dongle use it so it can charge up the blow the fuse capacitor :p

part of it is probably the really tiny antenna inside combined with the relatively good range. and as I said, they have to get the power to constantly blow that fuse after a couple of months from somewhere.

Got it half working thanks to this guy.

All we need to do is plug the controller into the OTG cable before you plug it into the tablet. Simple as that!

Now USB/BT Joystick Center detects the hardware, and all keypresses. However, no other apps seem to detect any keypresses (e.g. Mupen64Plus, XBMC 12.0 BETA 2 etc.)

This topic is now closed to further replies.
  • Posts

    • I did think about a Echo show once and it would be useful to see what my cameras see. But my brother got one and I changed my mind. Adverts and not really worth the price just to see my cameras. I have a load of dots and a Echo Gen 4, they will do.
    • I asking where you are from or live, because if you don't live in the U.K, why are you so bothered? That is another reason I voted out, E.U and people poking their noses in where they should not be. Sadly we still have it, Trump, and his cronies. Putin as well and no doubt others. It makes no difference what we believe, if we made the right choice or not, we are out. As I said to someone when the news first broke we have voted out, we just need to make the best of it. I have no problems with closer ties to the E.U, we still need to trade. Just don't want to be in their club.
    • So you think I voted out because i am anti-immigrant. I am fed up with those that come over and think that we owe them something. The ones that are at the moment coming over from France where they are already in a safe country because they think and no doubt will get everything chucked at them. While people who were born and bred here get very little. I have nothing against as i have said before those that come here and work. In fact I know full well that our NHS would struggle without them. I do have a problem with those that come over here and try to push their religion and their way of life onto us. My reasons for voting out was because of what the E.U is and is also becoming. I did not agree with Freedom of movement, not because I don't want people over here, but because people need to be checked before being allowed to cross borders and that goes both ways. But my main thing was because the E.U is becoming if not already a united states of Europe. The only reason countries like Poland and Romania joined was because they had no money. When my partner left Poland, she had nothing, Poland had nothing, that is why she left. Wanted to learn something and earn a living. The E.U would have us back according to Michel Barnier. https://www.euronews.com/my-eu...ator-barnier-tells-euronews Why are you so scared to say what country you are in?
    • I wonder what that line really meant...
    • draw.io Desktop 30.2.6 by Razvan Serea draw.io desktop is a downloadable security-first diagramming application that runs on Windows, MacOS and Linux. Creating diagrams in the desktop app doesn’t need an internet connection. This is useful when you are disconnected or when you must create diagrams in a highly secure environment, where data protection is of the utmost importance. When you use the draw.io desktop app, your diagrams will be stored on your local device. Because this is a stand-alone application, also designed to run offline, there are no interfaces to cloud storage platforms available. Of course, you can still store your diagrams in folders that are synchronised to your cloud storage if you wish. Easy-to-use diagram editor The draw.io apps work just like the office and drawing tools you are used to using. Drag and drop shapes from the shape libraries and drag to draw connectors between them. Drag connectors to add waypoints and set a precise shape and position, or let them reroute automatically. Double click and start typing to add a label to anything. Create tables and swimlane flows with a familiar tool. Style shapes and connectors with customisable palettes, sketch options, fonts and text formatting tools. Search for shapes, including in open-source icon libraries. Use our vast libraries of shapes and templates, organised into logical categories, to create a range of diagrams and infographics. Generate diagrams from text descriptions using our smart templates. Diagram faster with keyboard shortcuts. draw.io Desktop 30.2.6 changelog: Uses electron 42.5.0 #2452 Updates to draw.io core 30.2.6. Download: draw.io 64-bit | Standalone (Open Source) Download: draw.io 32-bit | ARM64 | ARM64 Standalone Links: draw.io Home Page | Project page @GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Month Later
      Excellence2025 earned a badge
      One Month Later
    • Week One Done
      Excellence2025 earned a badge
      Week One Done
    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      498
    2. 2
      +Edouard
      206
    3. 3
      PsYcHoKiLLa
      145
    4. 4
      Steven P.
      74
    5. 5
      FloatingFatMan
      69
  • Tell a friend

    Love Neowin? Tell a friend!