• 0

Fedora 18 screwed pc (HELP!)


Question

So I never use any linix distros because I really don't like unix but a friend of mine asked me to download a copy of Fedora 18 and put the live cd version on a USB key.

I copied it using a program Unet something as I found on youtube. After rebooting to try it out my motherboard won't post anymore

P8P67 PRO

I've rebooted, shut down, reset the jumpers

Now I'm a bit ****ed how this happened?

Link to comment
https://www.neowin.net/forum/topic/1131354-fedora-18-screwed-pc-help/
Share on other sites

16 answers to this question

Recommended Posts

  • 0

So now a nice bright RED light is on the motherboard so something died kinda great it was working amazing up till I tried this POS.

Well seems like its the boot device LED that went off.

Known issue on the p8p67 PRO motherboards from what I read.

  • 0

So now a nice bright RED light is on the motherboard so something died kinda great it was working amazing up till I tried this POS.

Well seems like its the boot device LED that went off.

Known issue on the p8p67 PRO motherboards from what I read.

Unplug the computer from the power outlet and reset the BIOS either by using a jumper (look in you mobo's manual) or removing the battery for a few secons. Also try to power on the computer without the USB drive you prepared with Fedora.

If it posts and you can access the BIOS, see if ASUS has an update for it and update it.

  • 0

yeah defo not the fault of the download or Unetbootin, unless you told it to overwrite and install the image on the hard drive instead of the usb, i suppose that could stop your boot

  • 0

Seems someone else had the issue too over here: http://forums.overcl....php?p=14923555

What graphics card do you have?

(Once working again) I recommend using this instead (for making bootable Linux USB disks): http://www.pendrivel...-easy-as-1-2-3/ I have been for over a year, and it's brilliant. Also, try KNOPPIX (http://distrowatch.c...ibution=knoppix - preferably the DVD version) instead of Fedora. Using KNOPPIX is one of the best ways to start learning about/play around with Linux, because all the software is already there installed and configured for you.

  • 0

Seems someone else had the issue too over here: http://forums.overcl....php?p=14923555

What graphics card do you have?

(Once working again) I recommend using this instead (for making bootable Linux USB disks): http://www.pendrivel...-easy-as-1-2-3/ I have been for over a year, and it's brilliant. Also, try KNOPPIX (http://distrowatch.c...ibution=knoppix - preferably the DVD version) instead of Fedora. Using KNOPPIX is one of the best ways to start learning about/play around with Linux, because all the software is already there installed and configured for you.

Least he can get things going, me its dead in the water.

The device light is on I did pretty much everything to resolve it but its dead.

Gonna have to RMA and never touch linux again lol

Really ****ed off through didn't need this (so much work to do)

Anyways, new topic, recommend me a new motherboard that works with my specs other then Asus.

I always go with Asus boards and need a change. Price isn't an issue.

  • 0
  • 0

More of an underlying hardware issue - the software is a red herring.

I had to look up "red herring" on Urban Dictionary to understand what you meant: http://www.urbandictionary.com/define.php?term=red%20herring :laugh:

  • 0

Searching for "P8P67 pro recall" in Google comes up with info about a motherboard recall. Not good.

Here's more reading you can do about people having similar issues:

http://hardforum.com...d.php?t=1581590

http://hardforum.com...d.php?t=1633885

http://hardforum.com...d.php?t=1581490

http://hardforum.com...d.php?t=1580896

http://hardforum.com...d.php?t=1576509

My board was one of the ones that they fixed with the B3 stepping

so not exactly the same issue as those but thanks.

The board is going to have to be RMA'ed just really ticked off that it went like that since it was fine until I tried to put linux on a thumb drive.

Still looking for suggestions on another motherboard that will be good for what I already have.

So far i'm looking at MSI Z77A-GD55 and the GD65 series.

  • 0

Least he can get things going, me its dead in the water.

The device light is on I did pretty much everything to resolve it but its dead.

Gonna have to RMA and never touch linux again lol

Really ****ed off through didn't need this (so much work to do)

Anyways, new topic, recommend me a new motherboard that works with my specs other then Asus.

I always go with Asus boards and need a change. Price isn't an issue.

once again, it definitely wasn't linux or the unetbootin that caused the issue. just some really coincidental timing

but either way, it sucks and I hope your new mobo works out :)

  • 0

Lol @ blaming linux.

Anyways, my PC was doing this a couple nights ago. Wouldn't post and sat with a red light on. I unplugged it and cleaned the crap out of it (lots of dust). I re-applied some thermal paste as I figured it might of been heat problems. I put it all back together, and it took a bit for it to post the first time, however now it is running butter smooth, and am seeing quite the preformance increase just from the actions I took to clean it and cool it.

  • 0

I got a new motherboard and it did the samething turns out the SSD I have died. Fun fun, took the motherboard with it, it seems.

Lol @ blaming linux.

Anyways, my PC was doing this a couple nights ago. Wouldn't post and sat with a red light on. I unplugged it and cleaned the crap out of it (lots of dust). I re-applied some thermal paste as I figured it might of been heat problems. I put it all back together, and it took a bit for it to post the first time, however now it is running butter smooth, and am seeing quite the preformance increase just from the actions I took to clean it and cool it.

Yeah in my case everything is new, I always clean it every 2-3 weeks for dust so its spotless.

It was just an ill timed death of my SSD but I'm still scared to try my USB boot device, not in the mood to kill another pc.

Maybe I'll try it on my work laptop lol

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • ...or turn on your selfie camera and, if you're not pasty white, he'll degrade your connection
    • @goretsky I will keep those in mind for the calls we get and update our technicians with the list, im sure the list will grow and I hope there is a larger public statement on this.  Here is the statement from Huntress https://www.huntress.com/blog/klue-breach-investigation    
    • But we are talking about Elon Musk, no AT&T... I know big companies are evil, but Elon and his companies are in another level which is much more dangerous.
    • New PowerToys update fixes memory leaks and other issues by Taras Buria Another bug-fixing update is available for PowerToys version 0.100. After releasing version 0.100.1 with a bunch of bug fixes and patches, Microsoft pushed version 0.100.2 to address two important issues with one of Command Palette Dock's features. With PowerToys 0.100.2, Microsoft fixed the performance meter displaying incorrect values and memory leaks, which are particularly unwanted things in the current situation with overpriced PC hardware. Here is the changelog: Reverted a Performance Monitor dock refresh change that forced item refreshes on every metric update Fixed a memory leak in the Performance Monitor dock extension by reusing stable network upload/download band items instead of creating new list items on each refresh For those unfamiliar, Command Palette Dock is a relatively new addition to PowerToys. It is a taskbar-like tool that you can keep on top of the screen to pin various useful widgets, commands, and more. It can display time, weather, your PC's performance metrics, and more. Microsoft introduced the Command Palette Dock in March 2026 in PowerToys 0.98. Microsoft has dedicated documentation for Command Palette Dock, and you can check it out on the official Microsoft Learn website. You can update PowerToys to the latest version by going to Settings > General and clicking "Check for updates." Alternatively, you can download the installer from GitHub using this link. In other news, Microsoft is working on a new window-management utility for PowerToys. Called Alt Window Cycle, it will let you use the Alt + ` shortcut to switch between different windows in a single app. You can learn more about the tool here.
  • Recent Achievements

    • First Post
      OffsetAbs earned a badge
      First Post
    • Reacting Well
      OffsetAbs earned a badge
      Reacting Well
    • First Post
      Kolakid60 earned a badge
      First Post
    • One Month Later
      xvvxcvv earned a badge
      One Month Later
    • Week One Done
      xvvxcvv earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      422
    2. 2
      +Edouard
      181
    3. 3
      PsYcHoKiLLa
      136
    4. 4
      neufuse
      71
    5. 5
      Steven P.
      71
  • Tell a friend

    Love Neowin? Tell a friend!