Boeing 787 Dreamliner fleets grounded around the world


Recommended Posts

Boeing 787 Dreamliner fleets grounded around the world

Boeing?s Dreamliner turning into a PR nightmare

Goldman downgrades Boeing as Dreamliner mishaps pile up

On November 25, 2012, it was reported that Air India had requested a team of Boeing engineers come to India to address issues described as "teething problems" with its aircraft.

Early on the aircraft suffered from a cracked cockpit window and brake problems. On January 7, 2013, a battery overheated and started a fire in an empty 787 operated by Japan Airlines (JAL) at Boston's Logan International Airport.

A second 787 also operated by JAL experienced a fuel leak on January 8, and its flight from Boston was canceled.

On January 9, United Airlines reported a problem in one of its six 787s with the wiring in the same area as the battery fire on JAL's airliner; the U.S. National Transportation Safety Board subsequently opened a safety probe.

On January 11, 2013, a cockpit window cracked and another engine was found to have a fuel leak.

On January 11, 2013, the FAA announced a comprehensive review of the 787's critical systems, including the design, manufacture and assembly. US transportation secretary Ray LaHood stated the administration was "looking for the root causes" behind the recent issues. The head of the FAA, Michael Huerta said that so far nothing found "suggests it [787] is not safe".

On January 13, 2013, a Japan Airlines 787 at Narita International Airport outside of Tokyo, was found to have a fuel leak of 100 liters (26.5 U.S. gallons) during an inspection. The aircraft reportedly was the same one that had a fuel leak in Boston on January 8. This leak however was caused by a different valve; the causes of the leaks are unknown. Japan's transport ministry have also launched an investigation.

On January 16, 2013, an All Nippon Airways 787 made an emergency landing at Takamatsu Airport on Shikoku Island after the flight crew received a computer warning that there was smoke inside one of the electrical compartments. ANA said that there was an error message in the cockpit citing a battery malfunction. Passengers and crew were evacuated using emergency slides

Boeing need to get their **** together, and really fast with this. I can't see all of their ordering airlines staying on board for more delays.

They are way too close to the A350 expected first flight to be dealing with a major issue like this. When was the last grounding of this nature? DC-10? (I could be way off).

Wonder if the leaky engines are the Trent 1000's or the GEnx? That and a hot Lithium Ion battery are fairly easy fixes by substitution (including switching LiION chemistries.) OTOH, with the continuing Airbus A380 soap opera the problem is structural, a continuing series of cracks in the wings, and more difficult - just 4-5 sales of those big $$$$ birds for all of 2012.

Both Boeing and Airbus had better watch out for the coming onslaught of new, very modern and well priced birds from China's Comac (Commercial Aircraft Corporation of China.) The narrowbody C919 is due next year, and widebodies can't be far behind.

I take it you are all very familiar with the commercial aviation industry?

Yes, actually. I hope this doesn't in anyway impede me reading other people's opinions on the matter.

Docm, the Chinese models are cheap, but its kind of along the lines of, how safe are they compared to your typical 737? and I was wondering isn't a C919 like a copy of an MD-95 or a 737?

So the Chinese now have the ability to clone airplanes? I don't know if I'd trust it though.

A380 and B787 - two brand new aircraft. Basically the first completely new aircraft from either company in around 15 years or so. Of course they're going to have teething problems. Both aircraft used new design and construction techniques. Fatigue is always difficult to model, hence we're seeing the A380 problems only just showing up, and the 787 problems can arguably be pointed at individual systems failing - not a sign that it's a problem with the actual aircraft.

I can't see any western airlines willingly purchasing Chinese made planes... yet. It just wouldn't go down well with the public. They actually recognise the Boeing and Airbus names. Unfortunately one certain UK airline has been marketing it's 787 launch heavily to the general public - somehow I think that campaign may be quietly pulled today if it's not already been.

Docm, the Chinese models are cheap, but its kind of along the lines of, how safe are they compared to your typical 737? and I was wondering isn't a C919 like a copy of an MD-95 or a 737?

Same class as those, but Comac is going to use a lot of mainstream components; GE engines, Honeywell and other major company electronics etc. They bear serious watching by Airbus and Boeing because most planes are not sold to US operators but to the international markets.

I'd rather have Boeing's problem - as noted it's either components, like batteries that can be re-sourced, or installation/maintenance etc. As for the cabin windscreen breakage, I asked a pilot friend and he's had several break over the years so that's probably a 'so what?' Hit a bird or hailstone at 300+ knots and what do you expect?

With the A380 it sounds like a fundamental airframe issue.

My reaction to the cracked windscreen was /careface, but it depends on how it failed.. Cracked windscreens are not uncommon.

With the exception of the fire/smoke issues, it all sounds like general teething issues.

The fuel line issue is kind of surprising though.

Boeing and Airbus issue hundreds of safety advisement documents a year. The aircraft with these issues will be put on higher maintenance checking or will be issued with a fix (assuming one is warranted).

Problems aside....i think this plane looks amazing! I mean, in terms of its features and whatnot. Good steps forward - lower cabin pressure, more quiet/efficient engines, better air quality, etc.

I can't (couldn't?) want to fly on one! =)

Yes, actually. I hope this doesn't in anyway impede me reading other people's opinions on the matter.

good, tell me about it.

it's the opinions given and their sources that make a big difference in their validity.

I too have been in the industry for the past 25 years. in addition I have 6 of them to work with currently. yes, as with any other new aircraft (and this one is very much science fiction for many) it is painful. were you around for the first 777's you should have heard the gory details about them in the early days.

I will say that this being the first major paradigm shift in commercial aviation in many years and its going to hurt for awhile. hey, I might be wrong.

good, tell me about it.

it's the opinions given and their sources that make a big difference in their validity.

I too have been in the industry for the past 25 years. in addition I have 6 of them to work with currently. yes, as with any other new aircraft (and this one is very much science fiction for many) it is painful. were you around for the first 777's you should have heard the gory details about them in the early days.

I will say that this being the first major paradigm shift in commercial aviation in many years and its going to hurt for awhile. hey, I might be wrong.

Absolutely, no one is disputing that all new aircraft have teething problems. And your experience with these new aircraft really doesn't weigh much into the debate that is happening. I'm not in anyway saying this is a bad plane. However, in the scheme of things, and the huge delays already faced, further delays will mean more cancellations, and certainly a lot more money in compensation.

In the interest of not putting all of my personal life on the internet for a complete stranger to read, all I will say is that my knowledge of the commercial airliners is vast. I don't see this thread as an exclusive thread for aviation nuts either. Everyone is entitled to an opinion, and unfortunately for Boeing, it doesn't matter if every jet since the Dash 80 have had issues. The flying public see one thing, a grounding of a brand new plane.

Some of the damage in the public's eyes is already done.

And a big shift in the way planes are made is absolutely no excuse. None at all. These things need to be safe out of the box. And yes, I would say they are still safe. Buit there is a very major safety issue occurring on the aircraft. The FAA doesn't just ground aeroplanes for nothing.

Same class as those, but Comac is going to use a lot of mainstream components; GE engines, Honeywell and other major company electronics etc. They bear serious watching by Airbus and Boeing because most planes are not sold to US operators but to the international markets.

I'd rather have Boeing's problem - as noted it's either components, like batteries that can be re-sourced, or installation/maintenance etc. As for the cabin windscreen breakage, I asked a pilot friend and he's had several break over the years so that's probably a 'so what?' Hit a bird or hailstone at 300+ knots and what do you expect?

With the A380 it sounds like a fundamental airframe issue.

I honestly can't see any airline that wants a good image operating anything except Airbus or Boeing. I see Aeroflot using them, purely because they're used to operating unsafe heaps of ****.

Absolutely, no one is disputing that all new aircraft have teething problems. And your experience with these new aircraft really doesn't weigh much into the debate that is happening. I'm not in anyway saying this is a bad plane. However, in the scheme of things, and the huge delays already faced, further delays will mean more cancellations, and certainly a lot more money in compensation.

In the interest of not putting all of my personal life on the internet for a complete stranger to read, all I will say is that my knowledge of the commercial airliners is vast. I don't see this thread as an exclusive thread for aviation nuts either. Everyone is entitled to an opinion, and unfortunately for Boeing, it doesn't matter if every jet since the Dash 80 have had issues. The flying public see one thing, a grounding of a brand new plane.

Some of the damage in the public's eyes is already done.

And a big shift in the way planes are made is absolutely no excuse. None at all. These things need to be safe out of the box. And yes, I would say they are still safe. Buit there is a very major safety issue occurring on the aircraft. The FAA doesn't just ground aeroplanes for nothing.

I honestly can't see any airline that wants a good image operating anything except Airbus or Boeing. I see Aeroflot using them, purely because they're used to operating unsafe heaps of ****.

and here I thought you understood commercial aviation. you better look into your history.

and here I thought you understood commercial aviation. you better look into your history.

You tell me why I'm wrong almighty god of aviation.

Just because there are teething problems in every aircraft, doesn't make it right.

You can't tell me that the test aircraft didn't have this problem. If they didn't, then they need to look into their testing environments and see what real world tests they are not performing, and perform them.

I look forward to your full reply with why you are right, and I am wrong.

The thing that would concern me is that all of the 787's problems have hit in what I'd call an extremely short timeframe... By my recollection that's 2 battery fires, a wiring fault, 2 fuel leaks and 2 cracked windscreens since the 7th of january. Yes the A380 has it's own issues but they don't seem to be happening at such an alarming rate. Shouldn't be that hard for Boeing to fix but having the first widespread fleet grounding since the 1970s is going to do their reputation a great deal of damage.

The problem with the 787 is that lot of it was outsourced, and outsourced incorrectly.

Boeing decided that trying to make everything in the US was too expensive, so they outsourced a lot of it. For example almost 35% of the plane is made in Japan (the wings, electrical bits, doors etc). Parts are made in South Korea, and other smaller bits in Italy, France and Sweden.

Now originally Boeing sent specs to all the other companies that were making those parts and told them to follow them to the letter. But now those companies outsourced those parts to other companies and so on. For example the Wing Ribs were originally sourced to a Japanese company that then sourced them to Hyundai who then sourced them to a Chinese company. Boeing contracted a Japanese company to design and build the batteries and they manufactured them in China and then sent them to a french company who packaged the whole thing and sent it to Boeing.

When you have so much work being sourced out, to different companies and countries quality will suffer. Had those companies kept their work in-house, things might have been different but everyone was looking for a quick way to make a buck.

I'd rather have Boeing's problem - as noted it's either components, like batteries that can be re-sourced, or installation/maintenance etc. As for the cabin windscreen breakage, I asked a pilot friend and he's had several break over the years so that's probably a 'so what?' Hit a bird or hailstone at 300+ knots and what do you expect?

The cockpit window broke without anything hitting it. And it's not a "so what" event, sorry. Had the entire window shattered, the plane would depressurize and the pilots would have had to make an emergency descent (well they would have started to do that when a crack appears).

With the A380 it sounds like a fundamental airframe issue.

Which Boeing will have due to the airframe being completely composite. Boeing likes to claim that composite aircraft are so much stronger and safer but go to any diamond flight school's maintenance hanger and see how many times their composite aircraft have skin problems.

Hell a senior Boeing engineer complained to management that composite fuselages weren't totally safe and in a crash they could quite easily shatter and burn with toxic fumes. Know what Boeing did with that information? They fired the guy.

just 4-5 sales of those big $$$$ birds for all of 2012.

Both Boeing and Airbus had better watch out for the coming onslaught of new, very modern and well priced birds from China's Comac (Commercial Aircraft Corporation of China.) The narrowbody C919 is due next year, and widebodies can't be far behind.

The problem with A380 sales has more to do with the market and not the quality. Airlines are moving away from the hub and spoke model because its not fuel efficient. They're also replacing the 747 routes with the 777 because its more fuel efficient. Now in the midst of this Airbus introduced a giant plane that depends on the hub-spoke method and has 4 engines. Something that airlines don't want.

And as for a chinese commercial plane? Sorry I'd rather shoot of my legs and crawl to my destination than sit on a plane made in China. At some point in the future they might be great planes, but next year nope.

Hell Russia has decades worth of aircraft building experience and most people wouldn't go near their commercial aircraft with a 100 foot pole. China has next to no experience and the only planes they've made are copies of Russian ones (and poor copies too).

There is nothing wrong with the fundamentals of the 787 the problems are teething problems and that uses Lithium ion batteries to greater extent then any other jet. Lithium batteries in cars to computers they have various problems. Once these battery problems are ironed out it should be good to go.

There is nothing wrong with the fundamentals of the 787 the problems are teething problems and that uses Lithium ion batteries to greater extent then any other jet. Lithium batteries in cars to computers they have various problems. Once these battery problems are ironed out it should be good to go.

It's the first plane to use lithium ion batteries.

  • 2 weeks later...

What's important is what type of Lithium Ion battery, particularly the elactrode materisl (nanophosphate is better/safer) the siz and the physical arrangement & ability to isolate (electrically and physically) the individual cells in the battery if one fails or goes into thermal runaway. Smaller cells make for a more controllable situation.

Now this news from some lithium battery pros -

http://mobile.reuters.com/article/idUSL1N0AY11R20130129?irpc=932

UPDATE 1-Tesla CEO extends help to Boeing on battery issue

DETROIT, Jan 28 (Reuters) - Elon Musk has long considered Tesla Motors Inc the bold, nimble answer to the auto industry's cautious culture. Now the electric car maker's top executive has extended his help to another industrial giant: Boeing Co.

In a Jan. 26 message on Twitter, Musk said he was in talks with the chief engineer of Boeing's 787 Dreamliner plane, which regulators have grounded indefinitely after a string of malfunctions ranging from fuel leaks to battery meltdowns.

"Desire to help Boeing is real & am corresponding w 787 chief engineer," Musk wrote on the social media website.

Musk, who is also the CEO of space transport company SpaceX, told Reuters in an email late on Monday that SpaceX battery packs could be helpful for Boeing.

"We fly high capacity lithium ion battery packs in our rockets and spacecraft, which are subject to much higher loads than commercial aircraft and have to function all the way from sea level air pressure to vacuum. We have never had a fire in any production battery pack at either Tesla or SpaceX," Musk said in the email.

Boeing declined to comment or confirm if such discussions were taking place.

Boeing's chief 787 engineer, Mike Sinnett, has recently made presentations about the plane and its battery technology to reporters and industry leaders.

Musk's post came a week after his first dispatch to Boeing on Jan. 18: "Maybe already under control, but Tesla & SpaceX are happy to help with the 787 lithium ion batteries."

>

This topic is now closed to further replies.
  • Posts

    • OpenClaw now has native mobile apps on iOS and Android by Karthik Mudaliar OpenClaw, the viral open-source personal AI agent, now has its own mobile app, available on both Android and iOS. Users can pair the app with an existing OpenClaw gateway and can start using new mobile-native features that are now available on the app. The app supports all the existing features you'd already have seen on OpenClaw's TUI, as well as some more, such as real-time and background Talk mode, action approvals, sharing from iOS, and optional access to device capabilities such as camera, screen, location, photos, contacts, calendar, and reminders. These features are available on both the Android and iOS versions of the app. What's important with these apps is that they don't run OpenClaw on your phone, but are actually just companion apps that require a running OpenClaw Gateway on an existing device, on macOS, Linux, or Windows via WSL2. To pair the app with your existing OpenClaw gateway, users need to run the command "/pair qr" on the TUI or existing chat interface, which brings up a QR code. Users can then scan this QR code to pair it up with the mobile app. There's also an option to manually pair the app by entering the host and a port. Previously, OpenClaw had been available on phones via WhatsApp, Telegram, Slack, Discord, Microsoft Teams, Matrix, and others. Now, with a native mobile app, the interface is much cleaner and more focused on just the OpenClaw, of course, with the added support for camera, screen, location, and more. It's important to note that OpenClaw comes with its own security warnings. There's always a chance of prompt injection with these tools, so users are recommended to double-check authentication, tool policy, sandboxing, and execution approvals rather than prompts alone. For users well-versed with the AI harness, a native mobile app makes it easier to approve an automation, share a link, use voice, or let an agent react to phone-side context.
    • Google pitches Spanner as one database for all AI agents with these new featues by Karthik Mudaliar Google Cloud is introducing new features within Spanner, its distributed database, as a place where enterprises should keep their data, using which AI agents could make smarter and better decisions. In a detailed blog post, Google highlighted quite a few features coming to Spanner, including relational data, graph relationships, vector search, key-value access, full-text search, and operational analytics together in one database architecture. Google says that today's systems aren't well-made for AI agents. There could be data that is present in one system, search indexes in another, embeddings in a vector database, and relationship data in a graph database. This fragmentation isn't great for AI agents to do their jobs because they don't have access to all of this data in one place. This is where Google is positioning Spanner as a solution. Spanner is already a globally distributed relational database with strong consistency, and Google wants its customers to see it as a broader data layer for AI applications. The company introduced something called Spanner Graph, along with integrated vector search, full-text search, a Cassandra-compatible key-value endpoint, and a columnar engine for analytical queries on operational data. Google also added that its ScaNN-powered vector search can support indexes with more than 10 billion vectors, while the columnar engine can make some analytical scans up to 200 times faster. All of this isn't just exclusive to the Google Cloud Platform, and there's support for multi-cloud as well. This comes via Spanner Omni, which Google says is a downloadable, containerized version of Spanner that can run on Kubernetes and in environments outside Google Cloud, including Microsoft Azure and AWS, and even on-premises infrastructure as well as edge deployments. Google says that customers who are interested in the full-featured edition should contact the company, and there's no word on commercial availability or separate pricing. Those interested can read the full blog by Google Cloud, which details these features individually.
    • Kalmuri 4.2.5 by Razvan Serea Kalmuri is your all-in-one, portable screen capture and recording solution designed for speed, simplicity, and flexibility. Whether you need a full-screen snapshot, a custom area, a scrolling webpage, or smooth video recording, Kalmuri delivers with ease. Capture text instantly from images with built-in OCR, keep floating images on top for quick reference, and use the precise color picker for perfect design matching. Customize hotkeys to work your way and share results instantly with built-in upload options. Kalmuri runs without installation, making it ideal for USB use, and offers an intuitive interface that’s easy to learn. Kalmuri key features: Video recording support (designation of whole screen and area) Whole screen, active program, window control, area application Extract text from images using optical character recognition (OCR). Support for PNG, JPG, WEBP, BMP, GIF file formats MP4 video recording powered by FFmpeg for high-quality results Full web page capture Share the captured image on the web Color extraction function Printer output Hotkey settings Adjustable via keyboard for area capture (Arrow key, Ctrl+Arrow key, Shift+Arrow key) File name format (sequential, datetime) Free to use it at work, at home, in government offices, at school, etc. Using Kalmuri portable for video recording Kalmuri’s portable version doesn’t include FFmpeg, which is required for video recording. Without it, you’ll get an “error FFmpeg.exe not found” message. To fix this, download FFmpeg from the provided link, extract it, and place FFmpeg.exe in Kalmuri’s folder. Kalmuri will then recognize it automatically, allowing you to start recording in high quality instantly. Kalmuri 4.2.5 changelog: Fixed an intermittent crash when using Area Capture Improved stability for Area Capture and screen recording Resolved a capture issue that could occur right after startup Download: Kalmuri 4.2.5 | 24.2 MB (Freeware) Download: Kalmuri Portable 4.2.5 | 2.1 MB View: Kalmuri Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • They have lots of info on me, I have a facebook account and have done so for years, it was the thing to have then. My phone number is not on it. I don't have the Facebook app on my phone these days, just the messenger part, and only for a couple of people to contact me, most will text me via SMS or phone. I agree, Meta, like others, even without an account will know something about me. Just have to try and keep some things private Also, never saw the need for Whatsapp, people used to ask for me to join it, but as I said to them, I have SMS and a phone, use that, or email
  • Recent Achievements

    • First Post
      rosiecharles earned a badge
      First Post
    • Reacting Well
      Juan Dela earned a badge
      Reacting Well
    • Week One Done
      Collagen Project earned a badge
      Week One Done
    • Reacting Well
      Wakeen1966 earned a badge
      Reacting Well
    • Rookie
      Almohandis went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      516
    2. 2
      +Edouard
      273
    3. 3
      PsYcHoKiLLa
      143
    4. 4
      Steven P.
      98
    5. 5
      macoman
      54
  • Tell a friend

    Love Neowin? Tell a friend!