Ubuntu 12.04 Unity 2D Stuck Issue


Recommended Posts

Well alright.

So what about my problem, all the steps I just followed has solved nothing?

Am I once again out of luck and must re-install? If I were to do that, how do I install the open-source drivers with all things needed?

I don't really want to do that again, quite annoying.

Since the proprietary AMD graphics driver is difficult to get rid of once you installed it outside of the repository, a reinstall is the easiest way to fix your problem. The open-source radeon driver is built into the Linux kernel; it will be installed by default. However, you still may not get accelerated graphics without installing a few support libraries. The basic procedure is below.

1) Install Ubuntu 12.04 or 12.10.

2) Add the additional Ubuntu repositories.


sudo apt-add-repository universe
sudo apt-add-repository multiverse
sudo apt-get update
[/CODE]

[b]3)[/b] Update Ubuntu and install the additional packages necessary for full acceleration with the [i]radeon[/i] driver.

[CODE]
sudo apt-get dist-upgrade
sudo apt-get install libgl1-mesa-dri-experimental libgl1-mesa-glx linux-firmware-nonfree xserver-xorg-video-radeon
[/CODE]

[b]4)[/b] Reboot.

[CODE]
sudo reboot
[/CODE]

[b]5)[/b] Check that you are using the proper driver and have full 3D acceleration.

[CODE]
sudo lshw -c video | awk '{if($1 ~ "^configuration") print $2}'
glxinfo | grep renderer
[/CODE]

  • Like 1

And you think that will solve my weird problem? Cause it's not really worth my time doing a fresh install if it's just going to happen again.

Of course, I don't really have any more options. lol

I think my proposed solution will solve your problem. And so long as you avoid installing software outside of the repository, you shouldn't have any more problems of this magnitude. Installing, removing, and updating software using the repository is drastically simpler anyway.

As I have already said, the radeon driver is generally MUCH more stable than fglrx. In fact, AMD has been providing specs and assistance to the Radeon Project for a few years now, which has dramatically increased the speed of development and featureset of the driver. AMD is planning to phase out fglrx in favour of radeon, although they have not set a specific date for that transition to complete yet. Not only is radeon very featureful and usable, but it is much more stable than fglrx because it can do things the kosher way (unlike fglrx) since it is entirely GPL'd code.

  • Like 1

Ok, so I need to learn.

When you say repository, what exactly do you mean?

There are 3 ways I have been installing programs, I either download a file from the programs website (.run or .deb) and install it.

I go to the Ubuntu Software Centre and install something.

Or I add a PPA and run commands in terminal to install something.

Installing something from the repository means downloading it from the Ubuntu Software Center (or other APT utilities such as apt-get, aptitude, or synaptic). If you add a PPA or other repository, such as Medibuntu, the packages can be installed with your favorite package management utility (often apt-get, although it could be others) just like packages included in Ubuntu by default, and is considered installed from the repository.

Downloading deb files directly from the Internet and installing them using dpkg, gdebi, or the Ubuntu Software Center (default in Ubuntu) is still installing the packages using APT, but not from the repository. You still get some of the benefits of APT, such as automatic dependency resolution, but not others, such as automatic updates or reasonable assurance that the package's dependencies can be satisfied and the software will work well with your system. However, since APT knows about the package, it will likely make it through distribution upgrades and will be easy to remove at some point in the future, if necessary.

Downloading run files (or any other form of Linux binary) from the Internet should almost always be avoided. Since APT doesn't know this software exists, you will need to install the dependencies yourself (which is often documented in the README that comes with the binary), and you are responsible for making sure you keep the software up-to-date and its dependencies remain installed through distribution upgrades. The recommend way to handle software that must be installed this way is to install it to /opt so that it is easier to manually manage and remove.

For example, I have MATLAB (a piece of technical software often used by engineers for intensive mathematical computations and simulations) installed on my system in /opt/MATLAB/R2008b (I know I have an older version, its expensive!). I then created a launcher (/opt/MATLAB/R2008b/matlab.desktop) and soft-linked it to /usr/share/applications/matlab.desktop so that it is displayed properly in my menu. Not only can I easily tell that I have MATLAB installed outside of the repository by listing the contents of /opt, I can also remove it easily by deleting just one directory and one file: /opt/MATLAB and /usr/share/applications/matlab.desktop. However, that installation method is the exception not the rule. Use it as a last resort.

The order of preference for package installation should be repository > deb file > binary installer.

Disclaimer: I made some generalizations to keep the explanation as simple as possible. However, my explanations are valid in almost every case; there are merely some technicalities that I didn't cover for the sake of brevity.

Thanks man, that's awesome information.

Though I am going to assume those generalizations is going to explain my next question, you said a downside of .deb files is there are no automatic updates. Though that is how I install Chrome, but it does get automatic updates.

Chrome is actually a special case. The deb has a post-install trigger that checks for the presence of Google's Chrome repository on your computer. If its not found, the repository will be added for you automatically so that you will continue to get updates. Although this is a very elegant solution for third-party software, most packages do not do this because it requires infrastructure to run a separate repository for that package alone. Instead, the authors assume that their package is already included in a repository or that you will keep up-to-date with new version manually. Dropbox is another example of another piece of software whose deb transparently adds a repository. VirtualBox is an example of one that does not (although they do have a repository that you can add manually, including explicit instructions for how to do so on their website).

I think Mindovermaster's last comment was intended to be sarcastic. That's why that emoticon is at the end. Its often really difficult to convey sarcasm on the Internet, though. I understand. In person, people often consider me very sarcastic. Not that there's ANY reason for that, OF COURSE!

Since the proprietary AMD graphics driver is difficult to get rid of once you installed it outside of the repository, a reinstall is the easiest way to fix your problem. The open-source radeon driver is built into the Linux kernel; it will be installed by default. However, you still may not get accelerated graphics without installing a few support libraries. The basic procedure is below.

1) Install Ubuntu 12.04 or 12.10.

2) Add the additional Ubuntu repositories.


sudo apt-add-repository universe
sudo apt-add-repository multiverse
sudo apt-get update
[/CODE]

[b]3)[/b] Update Ubuntu and install the additional packages necessary for full acceleration with the [i]radeon[/i] driver.

[CODE]
sudo apt-get dist-upgrade
sudo apt-get install libgl1-mesa-dri-experimental libgl1-mesa-glx linux-firmware-nonfree xserver-xorg-video-radeon
[/CODE]

[b]4)[/b] Reboot.

[CODE]
sudo reboot
[/CODE]

[b]5)[/b] Check that you are using the proper driver and have full 3D acceleration.

[CODE]
sudo lshw -c video | awk '{if($1 ~ "^configuration") print $2}'
glxinfo | grep renderer
[/CODE]

I just entered

sudo apt-add-repository universe

and it gives me Error: universe invalid?

**I just checked out the Software Sources area, and seems like both are already enabled.

  • 5 weeks later...

I am having issue running any games at all, even on low settings.

OpenGL renderer string: Gallium 0.4 on AMD CYPRESS is what I get with glxinfo | grep renderer.

Is that correct? What is needed?

That is the correct string for the radeon OpenGL renderer. If you are running Unity (or Compiz in general), make sure that "Undirect Fullscreen Windows" is checked to get the best performance in full-screen games. (Although the feature was introduced in Ubuntu 12.10, it has been backported to Ubuntu 12.04.2 - its just not default in 12.04.)

Unfortunately the 3D performance of Radeon and Nouveau is not quite up-to-par. Their 2D performance is fantastic, but the drivers are not well optimized at the moment. The Intel graphics driver is much better optimized, but the hardware performance is lacking. I'm hoping that the open-source driver AMD recently released for the Radeon HD 8000 series is a game changer when the hardware arrives!

That said, I am able to run Nexuiz, Minecraft, and Team Fortress 2 acceptably on my Radeon HD 5770 using Radeon and Gallium 0.4.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Shocker! It would be crazy to be ready to introduce a "fold" phone but have no plans happening for a followup model.
    • XBOX is at the end of its generational life cycle and wasn't selling much anyway. They need to figure out the pricing for XBOX Helios. However, I'm not buying the DRAM shortage with AI preferring HBM. I think it's industry gouging.
    • Amazon Prime Day 2026: Best Dolby soundbar deals from Sony, Samsung, JBL, Polk, and more by Sayan Sen Yesterday we covered the JBL BAR 800 which is a 5.1.2 Dolby Atmos/Vision soundbar. The unit is on sale for its lowest ever price of just $800 making it a solid offer. However, there are many more options to choose from and in this article, we have made a compilation of the best deals including from Sony, Polk, Yamaha, Denon, Samsung and more. Sony's BAR models are currently at their lowest prices which makes them solid offerings. The company's BRAVIA Theatre Bar lineup is designed to suit different home cinema needs. The Bar 5 is an entry-level 3.1-channel soundbar with a wireless subwoofer, supporting Dolby Atmos®, DTS:X, S-Force PRO Front Surround, and Vertical Surround Engine for immersive audio with clear dialogue. The Bar 6 upgrades to a 3.1.2-channel configuration by adding dedicated up-firing speakers for more convincing overhead Atmos effects while retaining the wireless subwoofer. At the premium end, the Bar 7, Bar 8, and flagship Bar 9 are single-soundbar solutions featuring Sony’s 360 Spatial Sound Mapping technology, which creates phantom speakers for a wider surround field. Bar 7 includes nine speaker units, Bar 8 increases this to eleven, and Bar 9 offers thirteen speaker driver units promising the most expansive soundstage and acoustic performance. All models should integrate seamlessly with compatible BRAVIA TVs and support the BRAVIA Connect app for setup and control. Get them at the links below: Sony BRAVIA Theater Bar 9 Soundbar (HT-A9000): $998.00 (Amazon US) (Was: $1498) Sony BRAVIA Theater Bar 8 Soundbar (HT-A9000): $798.00 (Amazon US) (Was: $998) Sony BRAVIA Theater Bar 7 Soundbar (HT-A7100): $618.00 (Amazon US) (Was: $768) Sony BRAVIA Theater System 6: $548.00 | Sony BRAVIA Theater Bar 6: $448.00 Sony BRAVIA Theater Bar 5 (HT-B500): $278.00 (Amazon US) (Was: $348) Sony HT-S400 2.1 soundbar: $198.00 (Amazon US) (Was: $248) Aside from those, we also have more discounts including from Samsung, Polk Audio, and more: Samsung Q-Series Soundbar HW-QS90H 7.1.2: $797.99 (Amazon US) (Was: $998) Polk Audio Signa S4: $336.00 (Amazon US) (Was: $449) Hisense AX3120Q: $229.00 (Amazon US) (Was: $259) Check out more soundbar deals that you may like at this link. Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • Stellarium 26.2 by Razvan Serea Stellarium is a free open source planetarium for your computer. It shows a realistic sky in 3D, just like what you see with the naked eye, binoculars or a telescope. It is being used in planetarium projectors. Just set your coordinates and go. Stellarium key features: Realistic simulation of the sky, sunrise and sunset Default catalogue of over 600,000 stars Downloadable additional catalogues for up to 210 million stars Catalog data for all New General Catalogue (NGC) objects Images of almost all Messier objects and the Milky Way Artistic illustrations for all 88 modern constellations More than a dozen different cultures with their constellations Solar and lunar eclipse simulation Photorealistic landscapes (more are available on the website) Scripting support with ECMAScript (a few demo scripts are included) Extendable with plug-ins: 8 plug-ins installed by default, including: artificial satellites plug-in (updated from an on-line TLE database) ocular simulation plug-in (shows how objects look like in a given ocular) Solar System editor plug-in (imports comet and asteroid data from the MPC) telescope control plug-in (Meade LX200 and Celestron NexStar compatible) The major changes of this version: Added new sky culture Added new plugin: Planes Many improvements in plugins Many improvements in Core and GUI Many updates in sky cultures. [full release notes] Download: Stellarium 26.2 (64-bit) | 456.0 MB (Open Source) View: Stellarium Home Page | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Conversation Starter
      Admir earned a badge
      Conversation Starter
    • First Post
      The_Focal_Point earned a badge
      First Post
    • Apprentice
      daryld went up a rank
      Apprentice
    • Contributor
      Carltonbar went up a rank
      Contributor
    • One Month Later
      The_Focal_Point earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      418
    2. 2
      +Edouard
      170
    3. 3
      PsYcHoKiLLa
      130
    4. 4
      Xenon
      69
    5. 5
      neufuse
      69
  • Tell a friend

    Love Neowin? Tell a friend!