Finding out what RAM is compatible with my machine?


Recommended Posts

Hi,

I currently have a Dell Vostro 430 which game with 2x2GB sticks, and I put in my own 4GB stick to take it to 8GB - it was a 4GB Crucial PC3-10600 stick

Even after disabling many processes etc through Soluto I'm always running at 80% or more of my memory (as I type this I'm using 92% of my memory) so would like to upgrade to 12GB. However I have just a few questions...

1) Would I be better buying 3x4GB sticks running the exact same memory, or can I just replace my 2x2GB sticks with 2x4GB sticks and it'll run nicely along my existing Crucial 4GB stick?

2) I ran Crucial's diagnostics tool and it recommended DDR3 PC-10600 and DDR3 PC-12800 sticks... but none of the 'super fast' (ie ballastix) came up, will my machine not support them?

Here's the kind of thing I'm looking at:

2x4GB to add to my 1x4GB

http://www.ebuyer.co...3d1609ds1s00ceu

OR http://www.amazon.co...62581739&sr=1-1

3x4GB

http://www.ebuyer.co...1600c9d3k3-12gx

OR http://www.amazon.co...62581612&sr=8-3

2x8GB to add to my 1x4GB to take me to a ridiculous 20GB!

http://www.ebuyer.co...p8g3d1609ds1s00

Any suggestions would be very welcome - I want to get the best performance possible but also don't want to over spend for something that may not benefit me... or worse, won't work in my machine!

Thanks :)

I'd try to get to the bottom of the high RAM usage rather than buying more and more RAM which looks like it will continue to get filled up no matter how much you buy, Windows should not be using anywhere near 8GB RAM idle

My Win 7 uses about 2GB out of 4GB total with mail and Firefox etc open, my Win 8 laptop with 2GB RAM is using 800MB only

Scanning for malware would be my first choice

  • Like 2

Annoyingly, upon checking with a flashlight... I actually have 4x2GB slots. D'oh...

Also, from the official Dell forums:

Your computer Vostro 430 supports maximum memory of 16 GB with following specifications: DDR3 SDRAM , Speed : 1066MHz, 1333MHz (non?ECC memory only).

Almost all memory is 1600hz... argh

As a side note, it seems really strange that your PC would be consuming 80% or more of the memory.

Unless you're gaming or running a virtual machine, it shouldn't come anywhere close to that with 8GB of RAM.

Sounds to me that something isn't right, so I'd check the process manager to find out what's using all that memory up.

Maybe post a screenshot for us and we can try to help you figure out how to fix it.

  • Like 2

Thanks for the respones btw everyone, really appreciate it :) And yes I'm running some VMs, and when you put iTunes, Photoshop, Fireworks, Windows Live Mail and a few other things on top my machine really struggles :(

Haha, well yeah that would explain it. :)

Thanks for the respones btw everyone, really appreciate it :) And yes I'm running some VMs, and when you put iTunes, Photoshop, Fireworks, Windows Live Mail and a few other things on top my machine really struggles :(

If when you close all those programs down, your RAM use returns to a normal level then yea grab more RAM, if it doesn't, then there could be a problem

Sorry all, this is hopefully the last question I'll ask (most places reference a maximum of 1333mhz so I'll stick to it)

Am I better off with:

2 x 8GB - Crucial (~?75) or Corsair (~?70)

Room for expansion if needed? Not sure if my motherboard would like 8GB chips

3 x 4GB - Crucial (?48)

The cheapest option, room for expansion to 16GB, not sure if this type of memory/my motherboard requires 4 chips though?

4 x 4GB - Kingston (?80)

The safest option, but also the most expensive/no room for expansion... still plenty of memory

It does unfortunately :(

I'm confused about RAM speeds... PC3-10600 seems to be 1333mhz, and PC-12800 seems to be 1600mhz - my machine apparently supports PC-12800, but only 1333mhz, what?

Everywhere I'm looking I see it supports PC2-6400 (800MHz)

http://reviews.cnet.com/desktops/dell-vostro-420-core/4507-3118_7-33782583.html

My board supports 2133MHz RAM, but only when I overclock, so everything I look at says its running at 1600MHz as that is the highest non-overclocked speed it supports

Eeek, sorry - it's the 430 (I'm doing a really bad job of this eh!)

That's a nice site for clarity though, thank you - http://reviews.cnet....7-33985675.html

Yea looks like PC3-10600 from that review, you could fit the faster PC3-12800 RAM and overclock the FSB to gain the extra speed though

Thank you, to be honest I'm a little unsure when it comes to overclocking etc (bad experience with my old AMD CPU!) and would value stability above most things...

(also the BIOS on my Dell is a nightmare, I have no way of even removing the fan warning that appears since I changed from the OEM one!)

I'm tempted by the 4x3GB for the triple channel memory, but damn it's almost doubled in price in 2 months! http://www.hotukdeals.com/deals/crucial-12gb-3x4gb-ddr3-1333mhz-ballistix-sport-memory-kit-ebuyer-for-28-50-delivered-1432907

Yea you might not have much OCing options in a pre-built machine, been a long time since I played with a Dell, I`m sure there will be people here who could help

Basically if you have the options, and only want to OC the RAM, you would raise the FSB clock speed and drop the CPU multiplier

FSB x CPU Multiplier = CPU Clock speed

I forget the exact calculation to determine RAM speed, but basically raising the FSB will also raise RAM clock speeds, but as I said above, if you don't want to OC your CPU at the same time, you need to drop the CPU multiplier as you raise the FSB

Example:

FSB: 200MHz

CPU Multiplier: x17

200MHz x 17 = 3400MHz CPU

--

FSB: 230MHz

CPU Multiplier: x15

230MHz x 15 = 3450MHz CPU

So now you have raised the FSB & RAM but maintained very close to stock clock speeds for the CPU

Thanks Detection :) That's good to know... although again based on my very limited experience in the BIOS on this machine it's not something I'd like to mess around with too much :( My case is very small too with 2 HDDs and an SSD (but only 2 hard drive bays) a big graphics card, lots of cables etc etc so I want to keep heat down to a maximum really... I think for the VMs the amount of RAM is most important rather than the speed... but saying that, even though I have an i7 this machine is well over 2 years old now, and I'm very much looking forward to getting a new one sometime (with a decent motherboard, and some room to actually breathe!)

Why do you think that using 80% of your RAM is bad? Are you swapping out? UNused ram is WASTED ram..

Now if your having to swap then yeah you need more memory, other than that why do you think your amount of RAM is the issue?

What do you think it should be using of your RAM?

Can you post a screen shot of your resource monitor showing your memory. How much have you allocated to your VMs? If you want to run more VMs then you have RAM for - then sure get some more. But I would also take a look at how much you have given to them - quite possible your have given them more than they actually require to do what you want them to do.

Thanks bud, good point about unused RAM being wasted RAM but when I'm this close to the edge I definitely think more memory is needed! Pardon my ignorance but is swapping out virtual memory? I imagine I am using that as my hard drive often crunches away for very little reason and my computer grinds to a halt (I run VMs on the SSD, and my main OS on one of the hard drives)

Here's a screenshot of my resource monitor:

BYtw8h5.png

Is that right Firefox is using 1GB of your ram - an 1/8 of your total? WTF dude??

Are you running VMs in this screenshot? How much are you giving to them? Can that be lowered? I would really suggest you look into how firefox is using 1.1+ GB!!

My firefox has been on all day.. With tabs upon tabs upon tabs open and its only using 700MB. You might want to restart it now and then, or change some of your habit ;)

:D Thanks Bud... unfortunately I have around 80 tabs open (I use it as a to-do list of sorts, at times it gets up to 300!) and yes I haven't shut it down since yesterday (it is rare I leave my computer on over night though, so this is an exception)

I am running VMs, 5 of them with 800mb each, seems to be about the right amount for XP :)

You need to run 5 vms of XP? All at the same time on your workstation?

Vs getting more ram, have you thought of putting that money towards breaking out your VMs to their own host running say esxi? That would free up all the resources of your machine to do what workstations do, vs hosting 5 machines that are doing what they need to do - but could be doing it on their own hardware leaving you the full resources of your workstation ;)

What they doing that they need 800? I give my w7 vms 512.. I do have an XP one - but rarely have a reason to load it and it only has 512 as well. So changing them to 512 would free up 1.5GB for your workstation to use.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Display Driver Uninstaller (DDU) 18.1.5.5 by Razvan Serea Display Driver Uninstaller (DDU) is a utility for completely removing AMD/NVIDIA/INTEL graphics drivers and related packages from your system, attempting to eliminate all leftovers (including registry entries, folders and files, driver store). Though AMD/NVIDIA/INTEL drivers can usually be removed via the Windows Control Panel, this uninstaller tool was created for situations where standard uninstall fails, or when you need to fully remove NVIDIA or ATI graphics card drivers. After using this driver cleaner, your system will behave as though it’s the first time you’re installing a new driver—similar to a fresh Windows installation. As with all such tools, we recommend creating a restore point beforehand, allowing you to undo changes if issues arise. If you're having trouble installing an older or newer driver, try it—there are reports that it resolves such problems. Recommended usage: The tool can be used in Normal mode but for absolute stability when using DDU, Safemode is always the best. Make a backup or a system restore (but it should normally be pretty safe). It is best to exclude the DDU folder completely from any security software to avoid issues. You do NOT need to uninstall the driver prior using DDU. Requirements: .NET Framework 4.8 Compatible with Windows 7, 8, 8.1, 10, and 11 (32-bit or 64-bit) Note: Using on Insider Preview builds is at your own risk. Display Driver Uninstaller (DDU) 18.1.5.5 changelog: Added 'Reset to recommended' button for the Options. General fixes and improvements. Download: Display Driver Uninstaller (DDU) 18.1.5.5 | 1.7 MB (Freeware) Download: DDU Portable | 1.2 MB Links: Display Driver Uninstaller Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • WACUP 1.99.51.24568 Preview by Razvan Serea WACUP (WinAmp Community Update Project) is a modern, enhanced version of the classic Winamp music player, designed for better stability, performance, and compatibility. Built for Windows, WACUP retains the familiar Winamp interface while adding 64-bit support, bug fixes, and new features like improved audio format support, customizable skins, and optimized playlist management. Unlike bloated alternatives, WACUP focuses on lightweight performance and regular updates, making it the best choice for fans of the classic Winamp experience. Basically, if you miss the good old days of Winamp and want a modern upgrade that doesn’t mess things up, WACUP is for you! WACUP key features: Classic Winamp Feel – Keeps the familiar interface and functionality. Bug Fixes & Stability – Fixes old Winamp issues and improves performance. 64-Bit Support – Works better on modern systems. More Formats & Plugins – Supports additional audio formats and third-party plugins. Customizable UI – Skins and tweaks for a personalized look. Better Library Management – Improved playlists, media organization, and search. No Bloat – Focuses on performance without unnecessary extras. Regular Updates – Community-driven development with new features and fixes. WACUP 1.99.51.24568 Preview changelog: Fixed a deadlock seen from the recent crash reports when doing some of the drag + drop actions within the media library window Fixed a loading crash seen related to a problem with some of the artwork cache image files being restored which should now be better handled allowing for the bad image to be removed without it failing Fixed a deadlock seen from the recent crash reports when the internal metadata cache clearing is triggered which could block the main ui thread for too long with this now being moved to a background thread Fixed some performance issues with some of the methods related to determining artwork support which mainly affected the local library import / refresh (this is still slower for some compared to other players because there's more data & artwork aspects being checked for which means doing more processing on a single file despite the best of attempts to reduce duplicate / heavy processing where possible) Fixed a crash with the JTFE based missing files hotkey which no one seems to have used for an age for this to appear (maybe it's time to seriously consider stripping out features that aren't being used) Fixed how some of the file types which use extra information to reference their sub-songs is handled which was preventing some from being correctly resolved back to their base file (noticed fixing above) Fixed an issue with the handling of files with underscores in their filepath which wasn't being correctly handled causing some of the filename to be lost when shown as the title if title reading is delayed Fixed a few things that might be behind NotSoDirect not being stable for some setups though am still not certain that the changes done for this are going to fully resolve the problem from the crash reports Fixed the OS toast handling when there's no prior shortcut in the OS start menu to now create the shortcut (needed to allow the yes/no buttons for the new build / post-release toast) to be done as a hidden one so it's less likely to cause annoyance for those not wanting to see it whilst still allowing this less than ideal OS api implementation requirement to be met to avoid toasts without the needed buttons Fixed a regression when moving from taglib1 to taglib2 which broke some of the handling in place to allow for external programs to still access files when wacup has a held open cached instance of the file Everything else Updated cppwinrt (gen_win10shell.dll) to 3.0.260520.1 (26 May 2026) Updated libcurl (libcurl.dll) to 8.2.1 (24 Jun 2026) Updated Monkey's Audio (in_ape.dll) to 13.15 (28 Jun 2026) Updated mpg123 (mpg123.dll) to 1.33.6 (6 Jun 2026) Updated OpenSSL (libcurl.dll) to 3.5.7 (9 Jun 2026) Updated pugixml to 1.16 (16 Jun 2026) Updated taglib (tag2.dll) to 2.3.0 (11 May 2026) Updated vgmstream (in_vgmstream.dll) to the latest Git commit from 28 Jun 2026 Download: WACUP 64-bit | 9.6 MB (Freeware) Download: WACUP 32-bit View: WACUP Website | Screenshots Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • "over a thousand engineering hours" and started selling it but could not take a couple of minuets to send an AI email to ask permission. What an expensive lesson.
    • just tested it yesterday, a simple page with autoloading ADS takes 60mb....just 1 page for 60 megabytes.   poor people with a limited internet never will visit neolose
    • Tor Browser 15.0.17 by Razvan Serea Protect your privacy. Defend yourself against network surveillance and traffic analysis. Tor is a network of virtual tunnels that allows people and groups to improve their privacy and security on the Internet. The Tor software protects you by bouncing your communications around a distributed network of relays run by volunteers all around the world: it prevents somebody from watching your Internet connection and learning what sites you visit, it prevents the sites you visit from learning your physical location, and it lets you access sites which are blocked. The Tor Browser Bundle lets you use Tor on Windows, Mac OS X, or Linux without needing to install any software. It can run off a USB flash drive, comes with a pre-configured web browser to protect your anonymity, and is self-contained. Tor Browser 15.0.17 changelog: All Platforms Updated Tor to 0.4.9.11 Updated NoScript to 13.6.25.1984 Build System / All Platforms Bug tor-browser-build#41821: Update gpg subkeys for boklm Bug tor-browser-build#41827: Update morgan's keychain with renewed key Download: Tor Browser (64-bit) | Tor Browser (32-bit) | 109.0 MB (Open Source) View: Tor Browser Website | Other Operating Systems Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Reacting Well
      Wakeen1966 earned a badge
      Reacting Well
    • Rookie
      Almohandis went up a rank
      Rookie
    • Apprentice
      jahara21 went up a rank
      Apprentice
    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      530
    2. 2
      +Edouard
      266
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      Steven P.
      99
    5. 5
      macoman
      55
  • Tell a friend

    Love Neowin? Tell a friend!