Converting NTFS to EXT without losing data


Recommended Posts

Dude it was in answer to your "blanket" statement of;

"You can't convert a live filesystem containing data from one type to another like that"

Which obviously was wrong - in both windows and linux ;)

586076708[/snapback]

Yeah I know, I was just kidding around. ;)

Its a shame I only just caught up with this thread!

Using partition magic (I have v8), you can convert ntfs to fat32 easily enough, then you can use PM again to convert the fat32 partition to the linux fs :)

Simple, easy, no formats or data loss :D

Raa.

Using partition magic (I have v8), you can convert ntfs to fat32 easily enough, then you can use PM again to convert the fat32 partition to the linux fs :)

Simple, easy, no formats or data loss :D

Raa.

586077568[/snapback]

You sure about that? The manual says this;

post-14624-1119005589_thumb.jpg

I see no mention of converting between MS and Linux file systems anywhere in the manual..

edit:

Nor do I see this possible in the program anywhere?

post-14624-1119006880.png

This is a FAT partition - where is the convert to ext2 or 3?

post-14624-1119006917.png

Here is a ext2 partition - where is the convert to fat?

I do not believe it possible in PM to convert from windows filesystems to linux or vice versa..

Edited by BudMan

Well I have a 40gb that has a lot of music on it but also a lot of Window's apps. I could probably just trash the apps as most now have newer versions out anyways. But I want to save my music.

I am pretty sure you can convert NTFS -> Fat32 but I don't know if you can then go from Fat32 -> LinuxFS. Hmm Partition Magic doesn't seem to like LinuxFS too well. Maybe we should check out Acronis which someone mentioned above.

And if it is possible to convert from Fat32 -> LinuxFS do you think it could be Reiser3 as I want to try that out instead of ext3?

Jonathan2007? --> do you have space issues? Why are you looking to convert anything? linux can read NTFS just fine - copy your music to whatever linux partition using whatever FS you like..

edit: upon looking into this.. I find it very unlikely that you can convert from windows FS, be it fat16, fat32, ntfs, etc.. to a linux FS.. be it ext2, 3, etc..

And even if there was a way - the likely hood of data corruption would seem to be high.. I would highly suggest you find a way to move your data off the partition.. If you do not have a spare disk, or one you can borrow.. how about borrow somone's machine with decent space available.. you could copy your data across the network.. Whats your upload speed? You could always move your critical data to a ftp server somewhere..

Keep in mind you do NOT need to move all 120Gig of it.. just a portion of it.. You need to free up enough space so that you can create a decent linux partition on this disk.. then move data from the windows partition to the linux.. resize them.. repeat ;)

If need be you could use 1 DVD to create enough space to get the process started.. But with all that resizing.. there would possible corruption..

Your best option IMHO is buy another disk --> Disks are CHEAP dude... I know I saw a 250Gig external on Buy.com for like $149.. after rebate.. Get a buy.com CC and you can take off another $30 currently ;)

Shoot here is a 120G for $73 delivered to your door;

http://www.zipzoomfly.com/jsp/ProductDetai...ductCode=101003

Or shoot - here you go.. $50 after rebate, 160G ---> that has got to be CHEAPER than buying enough DVDs to back it up too ;)

post-14624-1119021133.png

Edited by BudMan

^^ Yeah I know Linux can read NTFS and I have setup Kubuntu to read my 40gb NTFS drive. But I have Kubuntu installed on a 10gb hdd and want to use my 40gb to store stuff on. I want to be able to write to it. I may just convert it back to Fat32 so I can write to it using Linux. Is Reiser3 a lot faster than NTFS/Fat32? I have heard that it or maybe Reiser4 is a lot faster than Window's FS.

EDIT: I just found this site and I didn't know if it is any good or what exactly it does :unsure:

Edited by Jonathan2007

Why would you convert it to fat32? Is some locally installed windows based OS need read and write to it more often than the linux OS? Or is the 40gb drive your windows OS drive? - that you dual boot or something?

Why do you feel "faster" has that much to do with it? Its a "storage" drive - that I would assume you play your music off of.. does your music play correctly? Then what does it matter the performance of your FS be it faster or slower than some other FS --> if all your doing is playing music files?

Its like having a car that can top out at 200MPH, when the fastest you ever go 90.. What does it buy you? If they perform equally well getting to 90..

I would suggest you use a filesystem that is native to the OS that will be accessing it most often, and provides you with the functionality you require with any other OS that might need direct access to it.. ie if its a storage drive that is used more often by linux, then I would look into a ext2 since I do believe you can read and write ext2 with http://sourceforge.net/projects/ext2fsd

Since both windows and linux have common FS they can READ each other.. be it FAT, NTFS, EXT2, 3, etc.. it is always possible to copy the files from one filesystem and write to a different filesystem by the OS that has native support for the filesystem in question.. And it all goes out the window if there is network access.. For example, my storage drives are currently EXT3 - and the window machines can read and write files to them just fine.. across the network using samba.. Or you could use NFS, etc...

edit: what does the Partition Resizer have to do with this thread? It does NOT even support converstion of NTFS to fat.. it resizes and moves partitions around a disk.. it does not convert them to any other FS..

Edited by BudMan

^ Ok well you answered a lot of my questions. The 40gb hdd had been my windows hdd but I don't use windows anymore so I just want to be able to use the hdd as a storage hdd. I want to be able to write to it using Linux. It has NTFS right now. And I guess I will just use partition magic to convert the hdd back to fat32 so I can read it. But I didn't know if Reiser3 would give me more speed or something but you have answered that. Thanks. :)

I guess I will just use partition magic to convert the hdd back to fat32 so I can read it.

586079374[/snapback]

So you do NOT use Windows -- then why in the world would you use a Windows Filesystem?? :wacko: As to reading NTFS - there are no issues with linux reading NTFS.. only concerns with writing to it..

Are you having some space issue? That will not allow you to temporarily move the stuff from the 40GB drive??.. If it was your windows drive.. I would guess there is a HUGE amount of stuff on it that is NO longer required - ie the windows OS for example? ;)

Copy/Backup the stuff you want to keep "your music" Blow away the partition(s) - and redo the drive as you want -- with NATIVE linux filesystems.. since it seems that is what your using "but I don't use windows anymore" -- and if you want to play with the ReiserFS.. then sure go ahead.. or JFS, XFS, etc.. etc..

Whatever dude - hmmm NO backups, using fat32 - your freaking asking to LOOSE data ;)

I am curious HOW MUCH data you actually have.. if the 40Gig drive was your windows drive.. which your NO longer using.. I am sure there are GIGS and GIGS that is NOT needed.. HOW much music do you have?? Copy it to your linux drive.. or as already discussed in this thread.. resize the fat32/ntfs "windows" partition to give room on the drive.. Create a linux partition.. move your files into it.. Then delete partition or repeat the process until your files are now on linux partitions..

Dude your only talking the time require do copy files from one drive to another.. And you should ALWAYS have a backup!!

"To go forward, you must backup." ? Cardinal rule of computing.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Remember when the PS2 was banned from export because "its too high tech".. "it could be used for missiles".....
    • Nvidia 610.62 driver lands with big bug fixes and Empulse support by Pulasthi Ariyasinghe There is a new driver available for Nvidia GeForce hardware owners, and it's carrying a whole lot of bug fixes. The WHQL-certified 610.62 Game Ready driver is also adding support for Empulse. Empulse lands from 1047 Games. That may be familiar to first-person shooter fans, as this is the studio that has been behind Splitgate and the Splitgate: Arena Reloaded sequel. This latest FPS entry will land into early access on June 24, and it will have support for DLSS 4.5 with dynamic multi-frame generation and Nvidia Reflex on day one. FIXED World of Warcraft: Gaming stability improvements [5563205] FIXED Apex Legends: Occasional visual corruption after extended gameplay [6239327] FIXED Users may observe DLSS settings being grayed out in certain games after updating to display driver 610.47 [6262805] FIXED Improved gaming stability in multi-monitor configurations when using V-SYNC with DLSS Frame Generation [6158481] FIXED Resolved an issue that could cause jittering or ghosting in some DirectX 11 games when Smooth Motion is enabled [5937897] FIXED Resolved an issue that could cause some games to crash when launched with Smooth Motion enabled [5466398] FIXED [Ada] Resolves a frame pacing issue on certain monitors when G-SYNC is enabled [6226972] FIXED Resolved an issue that prevented the EDID from being read on certain monitors causing them to be identified as "NVIDIA NV-Failsafe” [6005508] FIXED Resolved an issue where certain monitors would not wake from sleep mode [5806798/5635230] FIXED General stability improvements when the system fails to create a new allocation [5449920] Nvidia has only listed a single open issue for this release: “Prefer Maximum Performance” Power Management Mode may not be applied correctly [6007998] The NVIDIA 610.62 driver is now available for download from the NVIDIA app. For those who want to download it directly, standalone links are here. Here are the official release notes (PDF).
    • You could do that in the last 2 updates as well.
    • Bose Ultra Open Earbuds are once again selling at their lowest price by Fiza Ali Amazon is once again offering the Bose Ultra Open Earbuds at their lowest price ever with a limited-time 33 percent discount on their original MSRP, ahead of Father's Day. So, you may want to check it out if you are looking for a gift or if you have been wanting to upgrade your device. The earbuds feature an open-ear design and Bose's OpenAudio technology that should deliver high-quality sound while helping keep audio private. The earbuds also support Bose Immersive Audio, which creates a spatialised listening experience designed to place sound around the listener for a more engaging experience. In terms of wireless connectivity, the earbuds features Bluetooth, Bluetooth Low Energy (BLE), A2DP audio streaming, HFP, AAC, and SBC support. Furthermore, they are compatible with Bose SimpleSync technology, allowing pairing with compatible Bose smart soundbars and speakers. They are also compatible with the Bose App for setup, customisation, and software updates. Moreover, they offer an IPX4 water-resistance rating that should provide protection against sweat and light splashes. When it comes to the battery performance, the Bose Ultra Open Earbuds should provide up to seven hours of battery life on a single charge while a full recharge should take approximately one hour. Specifications Detail Fit type Open-ear Noise cancelling No Microphone Built-in Wireless Bluetooth (A2DP, HFP, AAC, SBC, BLE) Multipoint Yes; 2 devices simultaneously Charging interface USB-C Earbud size 0.73"x0.67" x 1.07" (0.014lb) Case size 1.65"x2.56" x 1.04" (0.097 lb) Materials PC-ABS plastic, metal, silicone, gold plating App support Bose app; adjustable EQ, SimpleSync Audio tech OpenAudio, immersive/spatialized sound Bose Ultra Open Earbuds: $199 (Amazon US) - 33% off Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • After enabling it in about:config, customize, density, compact; the toolbar/address bar gets smaller vertically. I enabled Nova, I notice the tab bar/title bar is a bit larger vertically now? Everything always becomes a waste of space.
  • Recent Achievements

    • One Year In
      Console General earned a badge
      One Year In
    • One Year In
      Twozo Technologies earned a badge
      One Year In
    • One Month Later
      Twozo Technologies earned a badge
      One Month Later
    • Week One Done
      Twozo Technologies earned a badge
      Week One Done
    • Veteran
      branfont went up a rank
      Veteran
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      +Edouard
      190
    3. 3
      PsYcHoKiLLa
      109
    4. 4
      Steven P.
      89
    5. 5
      Nick H.
      68
  • Tell a friend

    Love Neowin? Tell a friend!