MythBusters tackles "plane on a conveyor belt problem"


Recommended Posts

Alright, I don't agree with what they did in Mythbusters!. When they pull that curtain with the truck the other way, the plane is still going and moving, it's gaining forwardness, it has to pick up! but when the belt is going the same speed with the plane, it wont allow it to move so no air on the wings, this isn't possible, mythbusters did this wrong, what do you guys think.

The plane can move forward regardless of the ground below. See my post above.

Something just didn't seem right about it, because it seemed like once the gas was pushed for the plane, it moved forward, never really matching the speed of the conveyor belt. It seems like that they want to achieve the same speed of both directions and then see if the plane takes off. Maybe I'm looking at this wrong?

They should build a large conveyor belt that doesn't require dragging a large belt on the ground. Those guys can do it!

The question describes the belt moving at the same speed of the plane (but in the opposite direction) just so that, at first, you incorrectly picture the plane being still ('cancelling it out'). But even if the question said the belt moved twice as fast as the plane, which would, at first, make you (incorrectly) picture the plane moving backwards, in reality the plane would still move in exactly the same way as if the ground was still. The speed of the belt really is of no importance (apart from technical details like how fast the plane's wheels can spin before overheating). Essentially the question is asking: does a moving runway affect a plane's take off?

Episode just aired, plane took off no problem. What was sad was that the pilot appeared not to understand how his plane functioned and believed his plane would remain stationary.

It's surprising how many people don't know how planes work, but you'd think pilots would understand.

It's surprising how many people don't know how planes work, but you'd think pilots would understand.

The problem (For most people, at least) wasn't that they didn't know how planes work, but that they didn't know quite what exactly the question was asking in the first place.

I always assumed the conveyor belt was just a way of saying "the plane is being kept stationary, can it still take off?" and if you look at the vast majority of the arguments against the plane taking off, they all talk about air flow and such.

If the plane is moving forward, there will be air flow, if not, there wont (and it wont take off). The myth was testing if the conveyor would stop the plane moving forward, that's clear now, but a lot of us (myself included) thought the myth was testing if the plane could take off from a stationary position.

The end result? Most people weren't really WRONG, it was more a case of whoever came up with the question didn't explain it well enough.

The end result? Most people weren't really WRONG, it was more a case of whoever came up with the question didn't explain it well enough.

But I think the whole point of the question was to catch out the people who thought it would stay stationary.

It's an excellent question because to answer to 'no' you have to have some understanding of aerodynamics, e.g. that a plane needs air going over its wings to gain lift. This knowledge makes you feel a bit smug and sure of your answer. The twist is that you need even more knowledge, about how planes get their thrust, to answer it properly.

But I think the whole point of the question was to catch out the people who thought it would stay stationary.

It's an excellent question because to answer to 'no' you have to have some understanding of aerodynamics, e.g. that a plane needs air going over its wings to gain lift. This knowledge makes you feel a bit smug and sure of your answer. The twist is that you need even more knowledge, about how planes get their thrust, to answer it properly.

People on both sides of the argument were incredibly smug about their answer, plus you don't really need THAT much knowledge to know that a plane gathers thrust from it's engines.

I still say the question was poorly worded, it should have asked "will the plane be able to gather enough forward momentum to take off?" rather than just "will the plane fly?".

Something just didn't seem right about it, because it seemed like once the gas was pushed for the plane, it moved forward, never really matching the speed of the conveyor belt. It seems like that they want to achieve the same speed of both directions and then see if the plane takes off. Maybe I'm looking at this wrong?

They should build a large conveyor belt that doesn't require dragging a large belt on the ground. Those guys can do it!

During the show they said what they did...

They first had the plane take off without the belt. They recorded the speed the plane was going when it lifted off the ground.

Then they put the plane on the conveyor belt and moved the truck at the speed previously recorded and started the plane moving. And as everyone saw it took off with no problem still.

I don't understand what doesn't seem right? They explained that a plane is nothing like a car and the ground has absolutely nothing to do with how a plane moves.

I think the reason the pilot didn't think it would take-off is because he wasn't a real pilot. He was an ultralight pilot. Ultralight pilots don't have to go through all of those pesky years of flight training and theory, I don't even think you need a license.

I didn't see the episode, I don't live in the states, but I read about it. You would think with so much controversy, they wouldn't half-ass it like it sounds like they did. It sounds like the plane was traveling much faster then the trap. If anyone knows a link to the episode, please post!

People on both sides of the argument were incredibly smug about their answer, plus you don't really need THAT much knowledge to know that a plane gathers thrust from it's engines.

I still say the question was poorly worded, it should have asked "will the plane be able to gather enough forward momentum to take off?" rather than just "will the plane fly?".

I didn't mean people were smug in a derogatory sense. I was just trying to explain how the question works on a psychological level. To answer no you have to have knowledge, which makes you feel like you know how to answer the question (sompare with someone who knows nothing about how planes work: they might not know how to answer at all, or will give a yes or no answer but for entirely the wrong reasons). I also realise that knowing how a plane gets thrust isn't a terrible amount more knowledge, I just mean that to answer properly you have to go beyond the initial bit of knowledge most rested on.

I also agree the question can be reworded, but like I said, the phrasing of the original is completely intentional in catching some people out. It's called a trick question.

I always assumed the conveyor belt was just a way of saying "the plane is being kept stationary, can it still take off?" and if you look at the vast majority of the arguments against the plane taking off, they all talk about air flow and such.

...

The end result? Most people weren't really WRONG, it was more a case of whoever came up with the question didn't explain it well enough.

The entire point of this question was to root out the people who thought the plane would remain stationary. This exposes the people who think of a plane as a winged car.

I knew something like this would happen:

Not A Believer! says:

It's a lie! It's all a lie!

I cannot accept their findings as they did not follow a method that I approve of, one that will guarantee that I am right that it's dumb to believe that an airplane can take off from a conveyor belt. Their test was stupid and not done correctly, the airplane was MOVING and that is so obviously wrong that I'll stop watching their show , their "treadmill" should have been moving much faster than the plane.

No matter what they say or prove, I cannot be made to believe that an airplane can take off from a conveyor belt. Better luck next time Myth-"busters".

? by Not A Believer! on Jan 31, 2008 at 07:15 AM

kottke.org

:laugh::

The entire point of this question was to root out the people who thought the plane would remain stationary. This exposes the people who think of a plane as a winged car.

Except that it didn't, not in my case anyway. I'm fully aware that a plane works completely different than a car. As I said, I never took the conveyor into the equation because the question was "can the plane still fly?" and not "can the plane outrun the conveyor?" or something.

Except that it didn't, not in my case anyway. I'm fully aware that a plane works completely different than a car. As I said, I never took the conveyor into the equation because the question was "can the plane still fly?" and not "can the plane outrun the conveyor?" or something.

If you never took the conveyor into the equation then the answer to "can the plane still fly?" would be an easy yes.

No, that's what I mean. Like I said, I took the conveyor belt to be a way of saying "the plane is stationary on the ground". So the engines are at full force, but the plane isn't moving forward. That's how I (and many others) interpreted the question and in THAT scenario, the plane definitely would not take off.

Everything Mythbusters did was absolutely correct and I'm not disputing their findings or anything, I'm just saying that there seems to be two real interpretations to the question and depending on which one you took would decide what your answer was.

No, that's what I mean. Like I said, I took the conveyor belt to be a way of saying "the plane is stationary on the ground". So the engines are at full force, but the plane isn't moving forward. That's how I (and many others) interpreted the question and in THAT scenario, the plane definitely would not take off.

Yes, you got caught in that trap. That is the trap for the people who think of a plane as a winged car.

The people who understood that a plane was not a winged car knew that the plane would go forward.

Yes, they knew it would go forward, but that never even factored into it for me and many others. Read what I'm saying, I interpreted the conveyor to just be a way of keeping the plane stationary, nothing more. It may as well have said "an anti-gravity field is placed upon the plane to prevent it moving forward" for all I cared.

The question never stated the plane can't move, it asks if the plane could fly if the tread mill matches it's speed (and it doesn't say what speed, air speed, ground speed, what part of the plane, etc.)

interpreted the conveyor to just be a way of keeping the plane stationary

How could you interpret it that way and NOT be exactly the type of person this question was trying to catch out?

I've never seen someone try to make so many excuses about getting a trick question wrong. Deal with it! It's meant to be light hearted!

It may be easier for some people to visualise the physics if they imagine the plane having frictionless pads in place of wheels and sat upon slippery ice. The plane's contact with the ground has little influence on the thrust driving the plane forward.

Wheels do not anchor planes to conveyor belts...

No, I thought the question stated it would be stationary, there's a big difference.

I don't really see a difference. If you understand how a plane works then you would know that it would not be possible to stay stationary.

I initially made the same mistake (if you look at my first post in this thread) but I quickly caught on and accepted that I was wrong.

I don't really see a difference. If you understand how a plane works then you would know that it would not be possible to stay stationary.

I initially made the same mistake (if you look at my first post in this thread) but I quickly caught on and accepted that I was wrong.

What I'm saying is that I thought the question was saying "the plane is stationary, what happens?" and not "will the plane BE stationary?". I thought the focus of the question was on how flight works and not on how ground force affects planes.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Amazon may use OpenAI and Nova models after Anthropic reportedly raises costs by Karthik Mudaliar Amazon is reportedly considering to use OpenAI models and even its own Nova family of AI models after Anthropic raised the cost of using Claude inside Amazon services. According to a report from The Information, Amazon is weighing its options to reduce costs under a new arrangement with Anthropic. But back in April, Amazon said it would invest $5 billion more in Anthropic, with the possibility of adding up to another $20 billion if certain commercial milestones are met. That investment actually came on top of another $8 billion Amazon had already put into the Claude maker. Anthropic, meanwhile, committed to spend more than $100 billion over 10 years on AWS technologies, including Amazon’s Trainium chips. Amazon isn't just a customer of Anthropic but also one of the most important backers and cloud partners. This is why it makes it interesting that Amazon is considering other alternatives to handle its internal workloads. Although Amazon has been building its own options for a while now. Its Nova family of AI models was announced in late 2024 for Amazon Bedrock, with models aimed at text, image, and video tasks. Amazon pitched the model around cost and latency at that time. With that said, OpenAI has also become a more realistic option recently for AWS customers as well as for Amazon itself. Earlier this year, OpenAI brought its latest models and Codex coding agent to Amazon Bedrock, after changes to its previously more restrictive Microsoft cloud arrangement. This allowed AWS to serve even those customers who wanted other alternatives from Claude, without having to move workloads out of Amazon's cloud. Evaluating alternatives could also be due to commercial pressure and not necessarily a sign of a damaged partnership between Amazon and Anthropic. Whether or not Amazon is actually considering switching entirely to OpenAI's models or its own Nova models remains unknown at this moment.
    • Samsung introduces new AI classroom tools and interactive displays at ISTELive 2026 by Fiza Ali Samsung has announced several new education-focused software features and interactive displays for schools during ISTELive 2026, taking place in Orlando, Florida, from 28 June to 1 July. The focus of these updates is on making shared classroom displays easier to use for teachers while giving IT administrators more control over managing devices. One of the key additions is the Samsung Account Management Solution (AMS). In many schools, multiple teachers share the same interactive display throughout the day, which means signing in and setting everything up can become repetitive. With AMS, teachers can log in by scanning a QR code or tapping an NFC-enabled ID card. Once signed in, their personalised workspace, including wallpapers, bookmarks, app shortcuts, and files, can be instantly accessed through Home Personalisation. Samsung has also included a screen lock feature, allowing teachers to lock the display if they need to step away briefly. Furthermore, the company is also updating its Education Portal with new tools designed for school IT administrators. The portal will allow IT administrators to register teachers, enrol devices, and manage user access from a central dashboard. Administrators can also link NFC cards to teacher accounts, making sign-ins quicker across shared displays. Another addition is a Tags feature that lets schools organise displays by building or classroom. Those tags can also be used to send emergency notifications to selected Samsung Interactive Displays through compatible platforms such as InformaCast and Raptor. Moreover, the tech giant's AI Assistant is gaining several new features aimed at supporting everyday classroom tasks such as lesson planning and classroom engagement. One of the features is Circle to Search, which lets teachers circle text or images on the display to quickly find related information, videos, or web results without interrupting the lesson. The content can then be brought into Samsung Whiteboard. Another feature, Live Transcript, converts spoken lessons into real-time captions, which could be useful for students with hearing impairments or those in multilingual classrooms. The AI Assistant also introduces AI Summary and AI Quiz. The summary tool creates summaries of recorded lessons, while AI Quiz generates questions based on lesson content so teachers can quickly check how well students are following along. Teachers signed in through Samsung AMS can also return to their previous AI-generated lesson materials without logging in again. Alongside the software updates, Samsung has expanded its Android-based Interactive Display range with three new models: the WAF-S, WAFX-PS, and WAHX-M. The WAF-S and WAFX-PS ship with Android 16, bringing updates to security, accessibility, and overall usability while maintaining compatibility with Google's education services including Google Classroom and Google Drive through EDLA certification. Meanwhile, the new WAHX-M is the biggest addition to the lineup, introducing a 98-inch display for larger spaces such as lecture halls and conference rooms. It will also be available in 65-inch, 75-inch and 86-inch sizes. Samsung says the WAHX-M further includes on-device AI features such as voice commands, text-to-speech, and an AI calculator, alongside support for Samsung AMS and AI Assistant. Samsung AI Assistant has been available since April, while Samsung AMS and the updated Education Portal will begin rolling out in July.
    • It's been $24 (single) or $89 (4-pack) for many days on both Amazon and Walmart as far as I know. That isn't a big discount. If these end up like the 1st gen, the 4-pack will routinely get down around $80, give or take a dollar. I think they have even hit $69 at times.
    • Microsoft brings Claude to its own Azure infrastructure, powered by Nvidia GB300 Blackwell by Karthik Mudaliar Anthropic's Claude models are now generally available in Microsoft Foundry on Azure and are running on Nvidia's GB300 Blackwell Ultra systems. Nvidia wrote in its announcement that the models are hosted on Microsoft Azure and accelerated by GB300 Blackwell Ultra GPUs, with Quantum-X800 InfiniBand networking used to support larger agentic systems and specialized sub-agents that can operate across business domains. This is great for customers and enterprises that want to build autonomous and domain-specific AI agents using Claude without moving outside Microsoft’s cloud platform. Microsoft currently offers Claude models in Foundry in two forms: “Hosted on Azure,” which runs end-to-end on Azure infrastructure and is generally available, and “Hosted on Anthropic infrastructure,” which remains in preview. This separation is quite important for organizations that have procurement, compliance, data processing, or internal governance requirements tied to Azure. Anthropic currently has 11 Claude models listed in Microsoft Foundry, including Opus 4.8, Sonnet 4.6, and even the unavailable Mythos and Fable models. Billing is handled through Claude Consumption Units (CCUs). Microsoft says CCU is an invoicing unit for Claude models in Foundry, with token usage converted using Anthropic’s published per-model token rates. The usage is billed through Azure Marketplace just like models from other distributors and appears on the customer's Azure invoice, while eligible spend can count against a Microsoft Azure Consumption Commitment. For starters, GB300 NVL72 is a rack-scale, fully liquid-cooled system that combines 72 Blackwell Ultra GPUs and 36 Grace CPUs. Nvidia has listed 37TB of fast memory, 130TB/s of NVLink bandwidth, and FP4 Tensor Core performance of up to 1,440 petaflops with sparsity. The deal is also part of a three-way partnership between Microsoft, Nvidia, and Anthropic. Under the deal, Anthropic has committed to buying $30 billion in Azure compute capacity and contracting additional capacity up to one gigawatt. Nvidia and Microsoft also said they would invest up to $10 billion and $5 billion in Anthropic, respectively.
    • WhatsApp is getting usernames, and you can reserve your preferred one now by Fiza Ali Sharing your phone number isn't always something you want to do, especially with people you've just met. Whether it's someone from a class, a local community group, or a sports team chat, handing over your number can feel like giving away more personal information than necessary. That's exactly the problem WhatsApp is trying to solve with its upcoming usernames feature. The company has announced that users can now reserve a unique WhatsApp username ahead of the feature's wider rollout later this year. Once usernames become available, they'll let people connect without revealing their phone numbers. It's a change that makes a lot of sense for group chats. Right now, everyone in the group can see your phone number. With usernames enabled, that won't necessarily be the case when someone contacts you for the first time. WhatsApp says it's opening username reservations early because more than three billion people use the app, meaning plenty of people are likely to want the same usernames. Reserving one now gives users a better chance of securing the name they actually want before the feature launches more broadly. If your preferred username is already taken, WhatsApp will also offer a built-in username generator to suggest available alternatives. The feature isn't only aimed at individual users. Creators, businesses, and organisations will be able to claim the same username they already use on Instagram or Facebook, making it easier to keep a consistent identity across Meta's apps. Furthermore, privacy is a big part of how WhatsApp is introducing usernames. There won't be a public directory where people can browse or search for usernames. Instead, people will need to know your exact username before they can start a conversation with you. Additionally, users can also choose to enable a username key, which adds another layer of control by requiring people to enter that key before sending a message. Once the feature rolls out, people who choose to use a username will no longer have their phone number shown when messaging a person or business for the first time. If you want to reserve a username, make sure you're running the latest version of WhatsApp, then head to Settings > Account > Username. The tech giant says usernames will roll out gradually over the coming months, and users will receive an in-app notification when the feature becomes available in their country.
  • Recent Achievements

    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      536
    2. 2
      +Edouard
      269
    3. 3
      PsYcHoKiLLa
      150
    4. 4
      Steven P.
      98
    5. 5
      macoman
      65
  • Tell a friend

    Love Neowin? Tell a friend!