Intel Processors Overclock Database


Recommended Posts

Here's a larger, more comprehensive online database: http://www.cpuoverclockers.com/

Seemed like we could use one of these, stealing the basic format from other overclocking databases because they work. ;) Gives users an idea of what to expect or about where everyone else's chips are.

Please list:

Processor

Stepping

Week and code (found on retail box and processor, formatted as LXXXAXXX with LXXX being week and AXXX being code) (optional)

Vcore (idle CPU-Z)

Method of cooling and make and model of cooler

Make and model of motherboard with BIOS version

OS version

RAM brand, model number, frequency (actual not effective), and latencies

All submissions must include a CPU-Z or CPUID picture or a CPU-Z validation link.

All submissions must be 8+ hours Prime95 or Orthos stable, included picture would be nice if not we'll trust you. :)

I also want to add a section for motherboards here to help shed light on what motherboards are doing what kind of front side buses. The best method of doing this is pretty much just dropping the processor multiplier and pushing the front side bus as far as the system will stay stable.

Please indicate whether or not your submission accurately portrays the maximum FSB reached by your motherboard, if not we're going to assume your submission is for the processor section only

Please post:

Processor

FSB (actual not quad pumped)

Motherboard make and model (revision number if applicable)

BIOS version

Northbridge and/or Southbridge Cooling Method

Any mods

Same thing, with CPU-Z/CPUID, but we'll accept four hours of Prime or Orthos stable.

Any submissions without any of the listed information will not be included in database

Try to keep the thread clean of the "nice oc" and "what settings did you use" posts, use another method of communication.

Also, if you made an initial post but improved on that overclock later, go ahead and repost but link to your original post. You can make multiple submissions for processors and motherboards, such as overclocks for both an E6600 and E9450. However, if you change out the motherboard, but keep the chip I'm just going to change your submission for the chip. E.g. I post my E6400 + Abit IP35-E overclock, then change the board out to an IP35-Pro. The entry will be edited to just replace the motherboard.

I'll try to make updates as often as possible, but don't expect to have your submission show up three minutes after you post. ;)

..alright, let's see how this goes. :) Go ahead and PM me if anything needs to be cleared up or if I made a mistake somewhere that should be rectified.

Unconfirmed Stability Test

Stable/Claimed to be Stable

Updated 13 February 2009 @ 1557 EST

Results:

Processors:

quadocdb.png

dualocdb.png

Motherboards:

mb.png

Edited by gwai lo
Link to comment
https://www.neowin.net/forum/topic/642085-intel-processors-overclock-database/
Share on other sites

Yeah I'm going to get around to it, I had the idea randomly in the middle of the afternoon as I was heading out. Haven't been on the computer for 15 hours else I would've added my own. I'm orthosing right now and I'll put up my 3200 MHz Orthos image by tomorrow morning. Don't have my week or code written down for some reason and I don't feel like taking the block off to check it. -_- but yes, if anyone else gets their data in before tomorrow morning 11AM PST you can be in the first update. :)

edit: Okay....yeah I'll break the ice. update coming up!

I'm posting mine ASAP....in a month that is. :p

As soon as I build my gaming rig for college I am immediatly overclocking it. As it is looking right now the setup is: Q9450, Asus P5K-E, 2x2gb, 9800GTX, 2 320gb WDC AAKS drives, etc. I can't wait to see the results.

Processor Core2Duo E6550 @ 2.8GHz

Stepping B

Revision G0

Vcore 1.232v

Method of cooling and make and model of cooler Air, Stock

Make and model of motherboard with BIOS version Asus P5K-e 1013

OS version Vista Ultimate 32bit w/SP1

RAM brand, model number, frequency (actual not effective), and latencies G.Skill, F2-6400CL4-1GBHK, 400MHz, 4-4-3-5 2T @ 2.1v

It is perfectly stable running Orthos for 8 hours, I've had it at these speeds for around 2 months and just didn't save a screenshot of it at the time because I didn't ever think I'd need one. :p It's only a minor OC, and I haven't tried to push it any farther.

cpuci1.jpg

Edited by CrashGordon

Just in case anyone is having trouble finding time to do an 8 hour ORTHOS/Prime95 stress test, here's what I do.

I just leave my computer on overnight (for one night) with ORTHOS or Prime95 on, and have it stress CPU over night.

If in the morning, the test is still going, then it's safe to assume your overclock is stable. If you get a BSOD overnight, then there might be a problem with stability.

Hope this helps.

I guess I should've added this for the Mobo list:

Processor Core2Duo E6550

FSB (actual not quad pumped) 400MHz

Motherboard make and model (revision number if applicable) Asus P5K-E

BIOS version 1013

Northbridge and/or Southbridge Cooling Method Stock

Any mods None

Use this with the other screenshots in my last post (nothing has changed)

moboun5.jpg

Processor: Q9450 @ 3200MHz

Stepping: C1

Week and code: L803B526

Vcore: 1.120V

Method of cooling: Air - Xigmatek HDT-S1283 with Artic Silver 5

Model of motherboard: ASUS Rampage Formula - BIOS 0219

OS version: Windows Vista Ultimate 64bit w/SP1

RAM: OCZ - 2x2GB - OCZ2RPR800C42G, 400MHz, 4-4-4-15 2T 2.0V

prime95pg5.jpg

Processor: Q9450 @ 3200MHz

Stepping: C1

Week and code: L803B526

Vcore: 1.120V

Method of cooling: Air - Xigmatek HDT-S1283 with Artic Silver 5

Model of motherboard: ASUS Rampage Formula - BIOS 0219

OS version: Windows Vista Ultimate 64bit w/SP1

RAM: OCZ - 2x2GB - OCZ2RPR800C42G, 400MHz, 4-4-4-15 2T 2.0V

Thanks for posting that one so much! I am planning on putting a Q9450 in my rig next month! I hoping for similar results to you, at least 3.2ghz.

I'm testing my E6550 @ 3.0GHz right now (429x7), ram is at the same FSB (x2 for DDR) with no change in timings or voltage on anything. It's looking very good so far, temps are no more than they were at 2.8 (Max. 58-59c) on the stock cooler. :yes: I'll post the results when Orthos finishes it's 8 hours or when I wake up tomorrow morning.

Processor: Intel QX9650 @ 3.4Ghz (Pretty Lame I know)

Stepping: C0

Week+Code: L739A743T

Voltage: 1.184V

Cooler: Zalman CNPS9700

Motherboard: Asus P5E Bios 0605

OS: Vista Ultimate x64

RAM: Kingston KHX9600D2K2/2G 4GB 5-5-5-15 @ 504Mhz.

CPUZ.png

Edited by Intelman
Processor: Intel QX9650 @ 3.4Ghz (Pretty Lame I know)

Stepping: C0

Week+Code: L739A743T

Voltage: 1.184V

Cooler: Zalman CNPS9700

Motherboard: Asus P5E Bios 0605

OS: Vista Ultimate x64

RAM: Kingston KHX9600D2K2/2G 4GB

CPUZ.png

How can you spend that much money on a processor and not overclock the crap out of it? :p

How can you spend that much money on a processor and not overclock the crap out of it? :p

I won it, my motherboard doesn't like high front side buses, I like an "auto" multiplier so on idle it clocks down, and I don't *need* more....yet ;)

Someday I might really try to go for more, but 3.4 sounded good.

I won it, my motherboard doesn't like high front side buses, I like an "auto" multiplier so on idle it clocks down, and I don't *need* more....yet ;)

Someday I might really try to go for more, but 3.4 sounded good.

What?!? Seems like I'm entering the wrong sweepstakes because everybody is winning hardware but me. :p

Where from?

Don't worry too much about getting a high overclock, it's not a show off thread, just information. In this case the vcore used is still information for those looking for some numbers to compare to. ;) So this is for everyone else holding off because they don't think they're clocked high enough...we just want numbers. Any of them are good.

I'll have you added by tomorrow afternoon, I have work at 6AM till 2 or 3 PM.

edit: hah I know what you're talking about. Mine aren't titration though, but stress/strain. :p

Edited by gwai lo

http://channel8.msdn.com/Posts/2019/

I tell you what, my engineering apps are f***ing fast now. Excel is much improved too, so I can do graphs with thousands of data points....I'm such a nerd.

curve.jpg

Don't worry too much about getting a high overclock, it's not a show off thread, just information. In this case the vcore used is still information for those looking for some numbers to compare to. ;) So this is for everyone else holding off because they don't think they're clocked high enough...we just want numbers. Any of them are good.

I'll have you added by tomorrow afternoon, I have work at 6AM till 2 or 3 PM.

edit: hah I know what you're talking about. Mine are titration though, but stress/strain. :p

Yeah I've done a few of those, they getting pretty bad. I think the computer took readings every 5 miliseconds when we rode bikes around campus measuring the stress/strain on the frame. I thought excel or my computer was going to die.

This thread will probably prove to be extremely useful. I guess even if the clocks aren't high, people can at least see what was "stable".

Edited by Intelman
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • They thought value of their goods would forever only drop like it used to and didn't account for sudden increase in price because of all the Ai hype. Tough luck Samsung, don't try to weasel this one out. Also American customer protection laws are a**. In Europe, you need to be compensated for a functioning product of same or better characteristics (not same price point as when it was originally bought!) if it can't be repaired and when you receive a replacement product your warranty starts from scratch because you received a different item than you previously had and old warranty thus cannot apply to it anymore. If your actual item was successfully repaired, warranty gets extended for the period the item was in service. If item is repaired to a significant extent, warranty also starts over from scratch because major part of it was replaced. Americans need to fight to get this kind of consumer protections because they are constantly getting screwed over.
    • Microsoft releases new Windows 11 Media Creation Tool with the latest updates by Taras Buria Patch Tuesday updates arrive every month, bringing users new features and security updates. To make sure customers have access to the most recent images, Microsoft also releases updates to the Media Creation Tool app, its official utility for Windows 11 installation. Today, the company pushed new ISOs to Media Creation Tool, allowing you to create images with the June 2026 Patch Tuesday updates. With the latest update, the Media Creation Tool now downloads KB5094126. It is Windows 11 version 25H2, build 26200.8655, which is also available via Windows Update. Note that the app itself remains on the previous version, which you can check in Properties > Details. The only change is that it now downloads a more recent Windows 11 build, so the only way to check is to download an ISO. The June 2026 Patch Tuesday update is a special release for Windows 11, as it brings a new performance profile to make the operating system more responsive and snappier when rendering various user interface surfaces, including the Start menu, quick settings, and more. It does so by spiking processor speeds for a brief moment, resulting in higher loads for a second or two. The so-called “Low latency profile” is rolling out gradually, but you can force-enable it with the ViVeTool app. Other changes include webcam improvements, Task Manager updates, shared audio support, and more. You can download the Media Creation Tool app from the official Microsoft website using this link. Besides MCT, Microsoft lets you download Windows 11 ISO as a file directly from the official Windows 11 website. However, you will need a third-party app to write it to your USB drive. Check out this guide if you want to know how to do that.
    • Louis Rossmann suing Samsung over "990 Pro SSD warranty scam" by Sayan Sen Back in 2023, if you recall, Neowin reviewer Robbie Khan had a dispute with Samsung over his 990 Pro SSD, which was rapidly losing its health. After significant back and forth, the tech giant had finally released firmware to "stop" the issue. Interestingly, its previous flagship at the time, the 980 Pro was also facing problems leading to two consecutive sets of firmware fixes. Three years later, it looks like a similar conflict has now broken out between tech repair entrepreneur YouTuber Louis Rossmann and Samsung, as it has escalated into a threatened lawsuit after the company allegedly refused to appropriately replace a failing 990 Pro SSD that remained under warranty. According to Rossmann, a 4TB Samsung 990 Pro NVMe SSD purchased for approximately $330 less than two years ago, began experiencing major hiccups and issues, even though he claims it had been operated under ideal cooling conditions. It was installed in a RAID 1 array and cooled by a heatsink and dual high-speed fans. However the drive reportedly started dropping out of the array, exhibiting controller-level failures that eventually became not useable in any meaningful way. Rossmann said Samsung’s support process was marked by delays and confusion from the very start. After initially contacting the wrong regional support channel, he was redirected to Samsung’s memory support division where he submitted detailed diagnostics, logs, and proof of purchase. Rossmann runs a repair company and owns an ACE Lab PC-3000 machine, which is a professional-grade data recovery equipment. As such, he had been confident in his diagnostics. Samsung even seemingly acknowledged that later. Regardless, Rossmann claims that his initial support ticket was automatically closed before a full 24-hour response window had elapsed, forcing him to reopen the case and resubmit documentation. The controversy however intensified further from here after Samsung accepted the drive for warranty evaluation but later returned it with a repair report stating that the drive had passed its testing and that the SSD had been verified as functional. Rossmann strongly disputed those claims citing that his own independent testing on PC-3000 showed write speeds reducing to as low as 40–60 MB/s before the drive failed entirely. Samsung subsequently informed him that the SSD had been reset and reflashed, passing internal stress tests. However, the company also stated that replacement units were unavailable due to an industry-wide memory shortage and suggested that a refund process could be initiated if further testing confirmed the fault. Thus, to settle, the company offered a refund of $330, the amount that was initially paid by him to make the purchase. Here, Rossmann pointed out the seeming hypocrisy of the tech giant as in how no Samsung drive was apparently allocated for warranty replacements, but they were abundantly available for retail sales especially when using business accounts. As you can see, Rossmann is indeed right, there are Samsung 990 Pro 4TB SSDs on Amazon currently for $950 (shipped and sold by first-party Amazon US itself), and they are also available on Samsung's own store too, albeit for an even higher price of $1100. Thus Rossmann argues that Samsung’s inability or unwillingness to provide a replacement while the same model remains available for purchase at significantly higher market prices reflects a failure to honor its warranty obligations. He has issued a formal 60-day notice and says he intends to file suit in Texas small claims court, asserting that companies should face greater costs for denying legitimate warranty claims than for fulfilling them. You can check out the full video titled "Samsung's 990 Pro SSD warranty policy is a scam; I'm taking them to court," at the link below. Source and image: Louis Rossmann (YouTube) As an Amazon Associate we earn from qualifying purchases
    • Was it too much to ask to show the icon in this article?
  • Recent Achievements

    • Week One Done
      davidbazooked earned a badge
      Week One Done
    • One Month Later
      Jamswaz earned a badge
      One Month Later
    • Week One Done
      Jamswaz earned a badge
      Week One Done
    • Rookie
      Marzoid went up a rank
      Rookie
    • Community Regular
      coch went up a rank
      Community Regular
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      PsYcHoKiLLa
      184
    3. 3
      +Edouard
      158
    4. 4
      Steven P.
      83
    5. 5
      ATLien_0
      75
  • Tell a friend

    Love Neowin? Tell a friend!