Intel Processors Overclock Database


Recommended Posts

Processor: Intel Core 2 Duo E6750 @ 3.6 GHz

Stepping: B Revision: G0

Vcore: 1.344

Cooling: Liquid - Koolance Exos-2

Motherboard: Asus P5E BIOS: 605

OS: Vista Ultimate SP1 x64

RAM: OCZ Reaper HPC Edition 2 x 2GB (OCZ2RPR800C44GK)

450MHz 5-5-5-15 2T

Sorry I don't have a screen shot but... Prime95 44+ hours stable.

post-60263-1213771934.png

http://valid.x86-secret.com/show_oc.php?id=377200

Processor Core2Duo E6550 @ 3.0GHz

Stepping G0

Vcore 1.224v

Method of cooling and make and model of cooler Stock

Make and model of motherboard with BIOS version Asus P5K-E Bios Ver. 1013

OS version Vista Ultimate 32bit w/SP1

RAM brand, model number, frequency (actual not effective), and latencies G.Skill, F2-6400CL4-1GBHK, 429MHz, 4-4-3-5 2T 2.1v

3ghzoverclockxt5.jpg

orthostestlf8.jpg

I guess you can update my Mobo entry too, nothing other than the FSB has changed (429MHz)

gwai lo: I noticed you're running 480FSB, were you able to run your RAM at a 1:1 ratio?

I haven't overclocked my OCZ Plat Rev 2 yet so I'm not sure how high I can go. 240MHz seems like a pretty large overclock when it comes to RAM.

Or do you have your RAM watercooled as well?

Yeah it was 1:1, but not on water. Just an 80mm fan blowing over the DIMMs and the NB...however I can't find my screenshot and I can't seem to get it stable again (might be the heat right now..dunno). So I'm going to remove the entry, but yeah these sticks did pretty good.

Quick update: on my Vcore I've reduced it to 1.176v to drop the temps, and ran Orthos for another 9+ hours and was stable, but I forgot to take a screenshot of it :pinch:. I was just happy to see my max temps at 56-57c. I can't believe how little voltage this cpu needs, the default 1.32v seems like quite a lot. Here's the CPU-z shot:

3ghzocvt7.jpg

Edited by CrashGordon
And I thought chc was the only guy with a Core 2 Extreme on the forums. I guess I was wrong! :p

Not until I get a QX9770 or something.

But anyways, this is the lazy way of doing it. Increasing the multiplier. :p

cpuzqx9650366sh2.png

I dropped it from 4GHz since it wasn't worth the extra volts. Mine is ES as you can see, but this one is complete junk when it comes to overclocking -- can't do 4GHz until 1.43V.

Processor - Intel Core 2 Extreme QX9650

Stepping - C0

Vcore - 1.35V

Method of cooling and make and model of cooler - Air - Noctua NH-U12P with Noctua NF-P12 @ 1100rpm cap

Make and model of motherboard with BIOS version - Asus Striker II NSE, 0305

OS version - Windows Vista Ultimate

RAM brand, model number, frequency (actual not effective), and latencies - Super Talent Project X DDR3-1600, 800MHz (1600MHz), 7-6-6-18 Unlinked mode

I've pulled way better OCs before, but this is good enough heh. I think I am going to get the new OCZ Flex II soon, the Striker II NSE reverses the RAM orientation and it looks ugly in my case :x

Processor: E8400 (500x8 = 4.0GHz)

Stepping: C0

Vcore: 1.352v

Method of cooling: Air - Noctua NH-U12P

Make and model of motherboard: Asus P5K-E (Rev A2) BIOS 1013

OS version: Vista Ultimate SP1 x64

RAM brand: 4GB Crucial Ballistix Tracers 5-5-5-15 @ 500MHz

post-7648-1213849435_thumb.jpg

only thing i'm kinda worried about is temps

i just put a new heatsink in. i've read that it takes time for the thermal paste to set (or cure?) and i can see a drop in temps of ~5 degrees?

You're fine, most people define 15?C-20?C under Tjmax as being safe. Desktop Wolfdale Tjmaxes are 95?C.

yayuh first 500 FSB posting. That's good enough right now for the FSB submission.

I'll have both of you guys added in a few minutes.

I don't think there's a difference in overclocking across different OS' though.

The only difference is that some 64bit users might be running 4GB of RAM.

But otherwise I think it's more dependent on the chipset and cooling.

Intel Core 2 Duo E4500

D Stepping

1.38 V-Core (Set to Auto in Bios because it isn't stable for some reason if it isn't)

Stock Intel Box Cooler (Air)

Gigabyte P35-DS3L Rev. 2.0 With F7 Bios

Windows Vista Business x64

Kingston KVR667D2K2/2GR (2GB of RAM) and Kingston KVR667D2N5K2/2G (Other 2GB of RAM)

Both 2GB Kits of RAM are 667MHz (PC2 5300)

The stock latencies are 5-5-5-15, but I have them running at 5-4-4-15 at 792MHz

Stable with prime95 for 12 hours. The temps hover around 60 degrees celsius when running prime 95 after a couple of hours, so I think I'm ok temperature-wise.

...

Remember to include CPU-Z screenshot of CPU, Mainboard and Memory tabs.

As well you forgot to include what speed your CPU is overclocked to.

Check CrashGordon's post on the first page for an example of how it should be formatted. :)

Remember to include CPU-Z screenshot of CPU, Mainboard and Memory tabs.

As well you forgot to include what speed your CPU is overclocked to.

Check CrashGordon's post on the first page for an example of how it should be formatted. :)

I was just about to do the same thing. :p

@Citrusleak: Also, a screenshot of Orthos or Prime95 for 8+ hours would be nice too. :)

@Gwai: can you update my Vcore to 1.176v?

@Gwai: can you update my Vcore to 1.176v?

Actually, don't do it quite yet. I had run Orthos for 9+ hours the other day and it was fine (but forgot a screenshot), so today I was going to rerun it, and it doesn't seem to be stable. I get an "This Program has encountered a problem and must close" or something in Orthos, although everything else is fine. It's almost like DEP kicked in and shut it down, although unlikely, but it's the same type of error box. I'm doing some more investigating to try and pinpoint if it's the voltage or just Orthos. I'm trying 1.192v now. I will remember to make a screenshot this time if all goes well. ;)

I'm pretty sure it's voltage. I had that happen to my Pentium D when I undervolted it a bit too much.

I'm pretty sure that's what it is. Also, it would fluctuate between 1.180 and 1.176 at idle, under load it would stay at 1.176. All other voltages i've tried it stays steady. It looks like 1.192 is going to be what works. It'll keep the temps at 38/58 (min/max) so that's 35c+ below tjunction max of 95c. I've got a build to do for the wife in a few weeks, so I might be able to sneak a ARCTIC COOLING Freezer 7 Pro in there along with my new Acer V223Wbd Black 22" monitor. :shifty:

EDIT: Sorry I forgot some information before. It won't let me edit my last post.

Intel Core 2 Duo E4500 @ 2.9 GHz

D Stepping

1.38 V-Core (Set to Auto in Bios because it isn't stable for some reason if it isn't)

Stock Intel Box Cooler (Air)

Gigabyte P35-DS3L Rev. 2.0 With F7 Bios

Windows Vista Business x64

Kingston KVR667D2K2/2GR (2GB of RAM) and Kingston KVR667D2N5K2/2G (Other 2GB of RAM)

Both 2GB Kits of RAM are 667MHz (PC2 5300)

The stock latencies are 5-5-5-15, but I have them running at 5-4-4-15 at 792MHz

Stable with prime95 for 12 hours. The temps hover around 60 degrees celsius when running prime 95 after a couple of hours, so I think I'm ok temperature-wise. I don't have screenshots for the prime95 because it was done a while back and didn't think to take screenshots when I did it.

post-167488-1213920357.jpg

post-167488-1213920365.jpg

post-167488-1213920371.jpg

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • It's actually shocking how logs filling disks has been a constant issue going back for decades, yet we see very little improvement over the years. Even in the server world, its actually shockingly common for a server to either go totally down, or have a critical alert raised due to logs filling disks.
    • YouTube has finally brought back its DMs feature, but only in these countries by David Uzondu Late last year, YouTube started testing a "new" way to share videos directly with friends, without having to leave the app. Now, the video giant has announced that is now rolling out a revamped direct messaging inbox, which lets you share videos, Shorts, and live streams and have conversations about them, directly on YouTube. The platform limits this feature to 18+ users who are signed in to a verified channel and use the latest mobile app version. Direct messaging on YouTube first became a thing back in 2017 inside the mobile app (later renamed to "Messages"), where users could chat one-on-one and share clips directly, but all that came to an end on September 18, 2019, when Google decided to shut it down after giving users a month to download a .zip file archive of their past chats. No one really knows why YouTube killed the feature, but users were encouraged to migrate to the public Comments section, on Community tab posts, and via YouTube Stories. The previous incarnation suffered from moderation challenges, prompting Google to implement stricter safety guidelines and age verifications for this new iteration. Here's a list of the countries where the re-launched feature is currently available, though note that Brand Accounts do not have access to it, at least for now: Countries American Samoa Austria Belgium Brazil Bulgaria Croatia Cyprus Czech Republic Denmark Estonia Finland France Germany Greece Guam Hungary Iceland Ireland Italy Latvia Liechtenstein Lithuania Luxembourg Malta Netherlands Northern Mariana Islands Norway Poland Portugal Puerto Rico Romania Singapore Slovakia Slovenia Spain Sweden Switzerland U.S. Virgin Islands United Kingdom United States Before you can use the feature, you first have to send an invite link to your contact. Invite links expire exactly seven days after you create them. If the person on the other end accepts the invite, you can exchange videos directly and text back and forth inside the app. To delete a message, just long-press on the message and tap unsend to remove it for both users. You can also delete entire conversations by long-pressing the thread and selecting delete, but the other person will continue to see the chat history on their end. To make sure everything remains safe, YouTube monitors these messages to ensure they follow Community Guidelines.
    • The problem of course is simply that government does not always know best. My point is that agency is taken away from the EU consumer in these cases. I'm sorry, but I do not believe that governments (politicians) are inherently good, and "looking out for me." Primarily they look to themselves and their own personal desires first, foremost, and always. When the EU or the DOJ fines these companies, claiming to "represent the welfare of the consumer," how much of these billion-dollar judgments are handed to the consumers they claim to represent? Not even a dollar, as I've seen. Yet the EUC lawyers who are paid to sit around and dream up these suits make huge commissions on the fines the EUC adjudicates, which is an ironclad fact I hope everyone is aware of. It's also rank corruption, of course, but that's another topic. Last, when the EU inflicts these judgments, or the DOJ, take your pick, the costs are bundled right along in the cost of the goods and services these companies provide the consumers they are "looking out for." If you are someone who believes his government is his savior then you have my condolences. I think Apple is right here, because the whole scheme of consumer choice is that consumers pick and choose among the products companies offer. Microsoft Windows is more compatible with third party software and hardware than any desktop OS on Earth, which is my sole reason for choosing it. Just because the EUC forces companies do certain things it knows the companies do not want to do, "or else", has no bearing on consumer benefit. This Siri thing is almost idiotic it's so infantile. But this is what the EUC does when the EU in Brussels becomes cash-strapped and needs a big infusion of cash. Some people get upset by "big companies" but it's the opposite when governments dwarf the size and scope of these companies, which is so obvious it hurts.... I mean you can't honestly believe that forcing Apple to do things with Siri it has its own reasons to decline is something that "opens up" Apple, do you? Say it aint' so...
    • Looks like many years since the request was made, a directory tree view finally may be added. https://github.com/files-community/Files/pull/18537
    • Is it still super slow or has it improved on that area?
  • Recent Achievements

    • One Month Later
      Tommi118 earned a badge
      One Month Later
    • One Month Later
      sjbousquet earned a badge
      One Month Later
    • Week One Done
      sjbousquet earned a badge
      Week One Done
    • First Post
      DragonOfMercy earned a badge
      First Post
    • First Post
      bella52 earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      501
    2. 2
      PsYcHoKiLLa
      210
    3. 3
      +Edouard
      156
    4. 4
      Steven P.
      84
    5. 5
      FloatingFatMan
      72
  • Tell a friend

    Love Neowin? Tell a friend!