Howto: Boot existing Ubuntu Partition using Virtualbox inside Windows


Recommended Posts

This is a tutorial I wrote up and posted up on my blog.

I recently got Windows 7 and Ubuntu running in a dualboot. However, since I’m using more of Windows now I figured I should probably find a way to run Ubuntu inside my Windows. VM’s are great, but it’d be better if I can actually boot into my existing Ubuntu partition. So I searched the web and kept on finding tutorials on how to boot existing XP partitions inside Windows. So I decided to extrapolate from those tutorials and work my way through it. I’ll be writing how I did it here.

Before we begin, you should have a dual boot setup. I will NOT be showing you how to setup a dual boot, if you need help plenty of other guides out there.

Step 1: Creating a grub boot iso

The grub iso file will allow you to specify which partition to boot into.

1. Boot into Ubuntu

2. We create the folders and copy the necessary files to setup an isoRun the command:

cd; mkdir -p iso/boot/grub; cp /usr/lib/grub/*-pc/stage2_eltorito /boot/grub/menu.lst iso/boot/grub

3. Configure your ~/iso/boot/grub menu.lst file to boot your target OS (in this case Ubuntu). Remove the “savedefault” option from your target entry if it exists.

4. We now create the bootable iso fileRun the command:

cd; mkisofs -R -b boot/grub/stage2_eltorito -no-emul-boot -boot-load-size 4 -boot-info-table -o grub.iso iso

5. Move the iso to a location that’ll be accessable by your Windows partition

Step 2: Creating the .vmdk file

This creates a file which tells Virtualbox what partition to actually load as the harddrive. Unfortunately, unlike VMWare Workstation, Virtualbox does not support a GUI interface for selecting RAW hard disks as the “virtual hard drive”.

1. Boot into Windows

2. cd into the directory you installed virtualbox

3. We find the partition number that needs to be mountedRun the command:

VBoxManage.exe internalcommands listpartitions -rawdisk \\.\PhysicalDrive1

(where 1 is the number of the hard drive ubuntu is installed on. E.g. Master should be 0, you’re second hard-drive should be 1 etc…The output should be something like:

	  Number  Type   StartCHS	   EndCHS	  Size (MiB)  Start (Sect)
	  1	   0×07  0   /32 /33  1023/254/63		902023		 2048
	  5	   0×83  1023/254/63  1023/254/63		 49677   1847346543
	  6	   0×82  1023/254/63  1023/254/63		  2164   1949086188

In this example, my Ubuntu partition is number 5 and the swap is number 6

4. We now create the VMDK file with the given informationRun the command:

VBoxManage.exe internalcommands createrawvmdk -filename C:\path\ubuntu.vmdk -rawdisk \\.\PhysicalDrive1  -partitions 5,6 -register

Step 3: Setup Virtualbox

Now everything should be ready to setup Virtualbox. Create a new virtual machine. Select the .vmdk file we just created as the hard drive and mount the grub.iso file we created at Step 1. If everything was successful Ubuntu should boot up nicely.

Edited by PCBEEF
  • Like 1
  • 1 month later...

Wonderful! I created an account on this site just to thank you!

I just have one small problem: Not able to run the guest at more than 800x600 resolution. I'll try my best to find out a way. If there isn't one, I'll just ignore it.

*Edit*

Nevermind, I just needed to install the VirtualBox guest add-ons and it worked!

Edited by Druglord
  • 2 weeks later...
Wonderful! I created an account on this site just to thank you!

I just have one small problem: Not able to run the guest at more than 800x600 resolution. I'll try my best to find out a way. If there isn't one, I'll just ignore it.

*Edit*

Nevermind, I just needed to install the VirtualBox guest add-ons and it worked!

I'm glad that my post helped you out :)

  • 2 years later...

Hi, first of all great and useful tutorial.

I just started to set up Windows7 and Ubuntu 11.10. I choked at the line


cd; mkdir -p iso/boot/grub; cp /usr/lib/grub/*-pc/stage2_eltorito /boot/grub/menu.lst iso/boot/grub
[/CODE]

You (or anyone) got any idea how this works in a recent version of ubuntu?

I'm completely new to unix so I got no idea. :s

regards, mouszeman

can you use this the other way round, i would like to use more ubuntu and less windows, but i want dual boot if needed. would be nice to use the current windows7 i have installed as virtualbox, under ubuntu. BTW if possible if i boot into windows (normal boot) would this do bad things?

  • 4 months later...

Brilliant!!! I spent enormous time solving this booting problem. This post helped finally! Many other posts on this issue point to the fake mbr way which I tried but got no luck. I guess the problem is all about helping virtualbox find the right boot record. The boot iso method is not the perfect way to do that since it depends on boot iso image but it's absolutely an ingenious method! Thank you very much!

Hi, first of all great and useful tutorial. I just started to set up Windows7 and Ubuntu 11.10. I choked at the line
 cd; mkdir -p iso/boot/grub; cp /usr/lib/grub/*-pc/stage2_eltorito /boot/grub/menu.lst iso/boot/grub [/CODE]

You (or anyone) got any idea how this works in a recent version of ubuntu? I'm completely new to unix so I got no idea. :s regards, mouszeman

In ubuntu 11.10 I use grub-mkrescue which can make rescue iso image for your system.

  • Make your own iso directory (e.g. /root/iso/boot/grub/) and copy /usr/lib/grub/i386-pc into it.
  • Copy /boot/grub/grub.cfg into /root/iso/boot/grub/
  • Run command: grub-mkrescue -o boot.iso /root/iso/ (I encountered an error about xorriso in the first time and "apt-get install xorriso" made it go away.)

After all those steps, you'll get your iso image. And then follow the other steps metioned by Jexel. Good luck!

  • 3 months later...

In ubuntu 11.10 I use grub-mkrescue which can make rescue iso image for your system.

  • Make your own iso directory (e.g. /root/iso/boot/grub/) and copy /usr/lib/grub/i386-pc into it.
  • Copy /boot/grub/grub.cfg into /root/iso/boot/grub/
  • Run command: grub-mkrescue -o boot.iso /root/iso/ (I encountered an error about xorriso in the first time and "apt-get install xorriso" made it go away.)

After all those steps, you'll get your iso image. And then follow the other steps metioned by Jexel. Good luck!

Hi, I didn?t check back for some time, but now I found your reply.

I did create the ISO the way you described, and managed to create the ISO.

After initial problems when I did not start Virtualbox as admin I got to the grub-screen.

Unfortunately, after that I got an error screen:

vbox_error.png

I found these two threads that seem related and also reference this current thread:

https://forums.virtualbox.org/viewtopic.php?f=6&t=38914#p175089

https://forums.virtualbox.org/viewtopic.php?f=6&t=49850

Regards, mouszeman

  • 2 months later...
  • 6 months later...

First: Excellent post!

Unfortunately, it didn't work for me: starting the VM gives it a black screen and then nothing happens.

Trying to run dualbooted Xubuntu 12.4.1 from within Windows 7 64bit.

After creating the grub files and ISO in Xubuntu as directed, I used these commands to create the VMDK:

C:\Program Files\Oracle\VirtualBox>VBoxManage.exe internalcommands listpartitions -rawdisk \\.\PhysicalDrive0

Number Type StartCHS EndCHS Size (MiB) Start (Sect)

1 0x07 0 /32 /33 153 /27 /2 1200 2048

2 0x07 153 /27 /3 1023/254/63 384738 2459648

5 0x83 1023/254/63 1023/254/63 72999 790405120

6 0x82 1023/254/63 1023/254/63 1999 939909120

3 0x07 1023/254/63 1023/254/63 16000 944003072

C:\Program Files\Oracle\VirtualBox>VBoxManage.exe internalcommands createrawvmdk -filename C:\ubuntu.vmdk -rawdisk \\.\PhysicalDrive0 -partitions 5,6

That actually created 2 files:

ubuntu.vmdk

ubuntu-pt.vmdk

however, it would only let me mount the first one.

UPDATE:

I had not correctly mounted the .iso file. When that's selected in the VM, it successfully boots from the iso and goes through the GRUB selection screen. However, then it says "file not found." (attached).

Any tips?

post-483760-0-44266700-1362720466.png

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I bought one of these last year. I really hope I won't have to deal with this crap. My drive is in good condition at the moment.
    • Umm, read my answer again! If you have something to add or contribute, feel free. Otherwise my point was that you apparently dont want faster updates... so you want slower updates by process of elimination. If you have something to contribute, meaningful answers are better.
    • These features described above are good, but far from what developers will like the most. The main feature that developers will care and love the most it's called "Bring Your Own Models". It gives us the ability to connect to LOCAL AI models running on Ollama. The feature it's located on GitHub Copilot tab -> On the model picker where you can select "manage models" instead of paid models and then it will show you the "Bring your own models" window where you can now select Ollama and the endpoint of your local server. So if you have a beefy spec machine you can now use your own model 100% local inside Visual Studio 2026 18.7.0
    • Microsoft Teams is getting a controversial location tracking feature that users may hate by Usama Jawad Image generated with Microsoft Copilot Earlier this year, Microsoft planned to roll out a controversial location tracking feature in Teams, but following customer feedback, it decided to delay its release. The bad news is that the company has decided to launch it later this year, but it's based on roughly the same design that was shared earlier, which means that many users still have good reason to worry. Basically, Microsoft Places and Teams have received workplace check-ins via Wi-Fi. The idea is that if an employee arrives at the office and connects to their enterprise network, their profile status indicator will show them as being present in the office. For example, if you arrive at work, open Teams on your PC, and connect to the "Studio B" company Wi-Fi network, your Teams profile will indicate that you are present in "Studio B", as shown below: Microsoft says that this feature is basically a replacement for physical workplace check-in peripherals, it reduces the need to manually update your status, and it also enables co-workers to know that you're at work so that they can coordinate in-person meetings with you. IT admins can enable this workplace check-in capability at a tenant level, and users have the ability to control whether they want to enable it or not. Of course, all of that sounds great on paper, but naturally, many Teams customers may still have concerns, as they did before. This is because it enables your reporting manager and other members of the organization to track if you are at the office, when you arrive at the office, and where you are right now. This could be problematic for people who work in what they consider to be flexible work environments or hybrid setups, and this kind of location tracking could be considered an invasion of privacy. Microsoft has tried to alleviate some of these concerns by letting users know that they can manually set their location easily, which essentially overrides workplace check-in if they feel uncomfortable with it. However, that doesn't really solve the problem because your organization could enforce a workplace policy that mandates that this feature remains enabled. The Redmond tech giant has also assured users that this capability does not store historical data and is only a real-time indicator of location. Finally, it only generates a signal when you connect to a corporate network, which means that if you are working from home and connect your PC to your personal Wi-Fi, it won't broadcast your location to your employer; you will simply be shown as "Remote". Microsoft has encouraged IT admins to prepare for this change and begin informing users so they know what to expect once it begins rolling out later this year.
  • Recent Achievements

    • Very Popular
      AndrewSteel earned a badge
      Very Popular
    • Veteran
      Taliseian went up a rank
      Veteran
    • One Month Later
      Clizby earned a badge
      One Month Later
    • One Month Later
      Timaximus earned a badge
      One Month Later
    • Week One Done
      Timaximus earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      516
    2. 2
      +Edouard
      162
    3. 3
      PsYcHoKiLLa
      157
    4. 4
      Steven P.
      82
    5. 5
      ATLien_0
      81
  • Tell a friend

    Love Neowin? Tell a friend!