More iPhone4 Issues: Proximity Sensor


Recommended Posts

Increasing numbers of iPhone 4 users are reporting the touchscreen becoming active during phone calls when the proximity sensor would normally shut it off, leading to inadvertent button-presses. The reports are coming in with enough frequency and consistency to suspect a hardware or calibration issue with at least a particular subset of iPhones. No word from Apple yet.

The iPhone's proximity sensor uses a small infrared LED and uses the reflection from nearby objects to deactivate the touchscreen when it's close to your head. If you hold it up to an iSight or other camera that can read near infrared light, you can usually just see the glow. The problem may be in how sensitive the detector is set to be on some phones or an actual problem with the detector. So far I haven't noticed it with my own phone, if I make a call and hold a finger in front of the sensor with my finger the screen deactivates out to about an inch away.

An email from a MMi member this morning reported hearing keypress tones during calls, and in one instance his phone tried to initiate a FaceTime call while he had the iPhone to his head. There's an Apple Support thread with forty-one posts as of the time of this writing, most with similar reports. One user saysthe display activates when he rocks it from side to side.

Anyone out there seeing this?

Source

Lots of reports of this now. Anyone here having this problem?

Link to comment
https://www.neowin.net/forum/topic/914742-more-iphone4-issues-proximity-sensor/
Share on other sites

I just had this happen when it was up to my face. I looked at the discussion on Apple's Discussion Boards. The contributors there have come to the conclusion that it's a software calibration issue that arises when you restore a backup from an earlier iPhone (2G, 3G, or 3GS) since the iPhone 4 has a different style of proximity sensor.

If you have the problem, try going to Settings > General > Reset > Reset All Settings (this doesn't delete any media). It fixed the problem for me.

You know we are hearing a lot more problems with the 4 than I can recall with any other version of the iPhone. Am I correct in saying that?

That is most likely because they redesigned the whole phone, while the previous 3 models had a similar design with very minor modifications.

The contributors there have come to the conclusion that it's a software calibration issue that arises when you restore a backup from an earlier iPhone (2G, 3G, or 3GS) since the iPhone 4 has a different style of proximity sensor.

Unfortunately I am experiencing this problem very frequently - it's rather annoying. I did not restore my phone from a previous back-up, so there is more to this issue than that I'm afraid.

You know, I wouldn't be surprised if this was the official response.

HAHA Same.. I was just thinking we will see an email screenshot in the next day or 2 from Steve Jobs saying, stop holding your phone completely. We are now selling a Bluetooth headset so you never touch your phone ever!!

I'm just glad I decided to get a new guitar amp with my money and wait a bit for the iPhone 4. I'd be so ****ed if I spent that much money (I'd buy it without a contract) and it had all these issues. Hopefully by the time I'm ready to buy, all the issues will be worked out.

Unfortunately I am experiencing this problem very frequently - it's rather annoying. I did not restore my phone from a previous back-up, so there is more to this issue than that I'm afraid.

That's odd. I did it and it completely fixed the problem for me. I haven't had it since I reset my settings.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Close, but it is for any application starting, not just during boot time. In fact, it probably will not improve boot time at all because during a boot, the CPU is already boosting, so a pre-boost wouldn't change anything. I agree that it isn't exciting (especially considering every other OS already does it), but it is a good thing, even if they are just playing catch up.
    • Any so called performance increase will be in milliseconds, which nobody will actually notice in real world usage.
    • All it does is use the CPU more efficiently during boot to speed up boot times. That's it. Yawn....
    • It's not a one or the other kind of thing. Software should run efficiently, and the operating system should appropriately manage the CPU clocks. You could have the best most optimized software on earth, and it will still run faster if the CPU does a better job of boosting as needed. All this is doing is pre-boosting the CPU based on user actions, instead of waiting for the normal detection mechanism to kick in. If the OS knows it is about to need more CPU, why shouldn't it use that knowledge? It's the same idea of downshifting before passing someone, instead of just burying your foot into the peddle and waiting for the transmission to figure out what you want to do.
    • Audacity 3.7.8 by Razvan Serea Audacity is a free, open source digital audio editor and recording application. Edit your sounds using cut, copy, and paste features (with unlimited undo functionality), mix tracks, or apply effects to your recordings. The program also has a built-in amplitude-envelope editor, a customizable spectrogram mode, and a frequency-analysis window for audio-analysis applications. Built-in effects include bass boost, wah wah, and noise removal, and the program also supports VST plug-in effects. You can use Audacity to: Record live audio. Record computer playback on any Windows Vista or later machine. Convert tapes and records into digital recordings or CDs. Edit WAV, AIFF, FLAC, MP2, MP3 or Ogg Vorbis sound files. AC3, M4A/M4R (AAC), WMA and other formats supported using optional libraries. Cut, copy, splice or mix sounds together. Numerous effects including change the speed or pitch of a recording. Write your own plug-in effects with Nyquist. And more! See the complete list of features. Audacity 3.7.8 changelog: #10688 Fixed an exception thrown when pasting into a newly-created track (Thanks, David Bailes (@DavidBailes)!) #10870, #10884, #10775, #10629 Fixed tone generation, waveform-scale setting, SetClip Name parameter, and clip-boundary command names for scripting and macros (Thank you, David Bailes (@DavidBailes)!) #11106 Fixed the loading of presets for the Distortion effect (A million thanks, David Bailes (@DavidBailes)!) #10947 Fixed paste into an empty audio track not preserving the source sample rate (Thanks, Juan Gabriel Colonna (@juancolonna)!) #10776 Allowed AltGr modifier in label and clip name editing (Thanks, Davide Peressoni (@DPDmancul)!) #9938 Added options to choose where silence is truncated (start/middle/end) (Thanks, Noah Rosenfield (@nosenfield)!) #9935 Added Podcast 2.0 chapters JSON export for label tracks (Thanks, Noah Rosenfield (@nosenfield)!) #10103 Improve UI on HiDPI displays on Linux/wxGTK (Thanks, Ivan A. Melnikov (@iv-m)!) #10099 Fixed MixerBoard Mute and Solo button display (Thanks, Ivan A. Melnikov (@iv-m)!) #10681 Fixed multichannel FLAC import #10999 Fixed envelope being broken after joining clips Download: Audacity 64-bit | Standalone ~20.0 MB (Open Source) Download: Audacity 32-bit | Standalone Download: Audacity ARM64 | Standalone View: Audacity Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Year In
      slackerzz earned a badge
      One Year In
    • One Year In
      highriskpaym earned a badge
      One Year In
    • One Month Later
      highriskpaym earned a badge
      One Month Later
    • Week One Done
      highriskpaym earned a badge
      Week One Done
    • Week One Done
      FBSPL earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      500
    2. 2
      PsYcHoKiLLa
      198
    3. 3
      +Edouard
      155
    4. 4
      Steven P.
      84
    5. 5
      ATLien_0
      71
  • Tell a friend

    Love Neowin? Tell a friend!