Whats the status of your SSD?


Recommended Posts

  • 1 month later...

Just got my SSD - a Kingston SSDNow V+180 64GB. Checked with SSDlife and as expected it shows 2020 as the life expectancy so i'll test it out for the next few days and see how it fairs then.

Scores a 7.1 on WEI (coming from a 5.1 for my Toshiba 1.8" 5400RPM drive).

CrystalMark gives it a 183MB/s Seq READ though, i've seen other people posting 230MB/s. Writes are where they should be at 173-179MB/s according to the specs.

(Got it for free, beggers can't be choosers :D)

  • 1 month later...

Only had mine 4 months :/

Bought my Kingston SNV425-S2 64GB SSD in September 2010.

January 2011 (when I originally posted the following results in this topic)

SSD was 4 months old

Health was 85%

Work time: 2 months, 6 days

Powered on: 229 times

September 2011

SSD is 12 months old

Health is 62%

Work time: 6 months, 1 day

Powered on: 578 times

Things are not looking good, it seems? Although the program says "Your drive health is in good condition and according to current use, estimated lifetime is August 2020."

Bought my Kingston SNV425-S2 64GB SSD in September 2010.

*snip*

Things are not looking good, it seems? Although the program says "Your drive health is in good condition and according to current use, estimated lifetime is August 2020."

that doesn't look good at all, it sound it would just a bit after the warranty expire

sucks to be in that situation (my HD4870X2 died a month or two after warranty expired :( )

  • 1 month later...

An honest question is why does this thread exists? Is they any proof that the numbers reported by SMART and this tool are reliable? I have encountered VERY few HDDs in my computing life that have failed and weren't reported "great" by SMART.

Although HDDs have more room for failure than SSDs I have also had countless USB flash drives just fail out of the blue as well (and they share the no moving parts SSD features).

So why are people posting screenshots to a tool that tells them their drive will last them decades when there is no proof that those numbers are even close to accurate? (although if such a reliability study does exist I would love to read it)

An honest question is why does this thread exists? Is they any proof that the numbers reported by SMART and this tool are reliable? I have encountered VERY few HDDs in my computing life that have failed and weren't reported "great" by SMART.

Although HDDs have more room for failure than SSDs I have also had countless USB flash drives just fail out of the blue as well (and they share the no moving parts SSD features).

So why are people posting screenshots to a tool that tells them their drive will last them decades when there is no proof that those numbers are even close to accurate? (although if such a reliability study does exist I would love to read it)

Who cares? If you still don't believe what the program predicts, then that's your own fault.

Common sense would say that a mechanical HDD will be less reliable than a SSD. And common sense would also say that there will be failures in both areas no matter what.

The only proof you need is the testimonial of people like me that have had SSD's for years and years without a single failure. Most people don't buy an SSD for the reliability either. The shear speed is the attraction.

Who cares? If you still don't believe what the program predicts, then that's your own fault.

Common sense would say that a mechanical HDD will be less reliable than a SSD. And common sense would also say that there will be failures in both areas no matter what.

The only proof you need is the testimonial of people like me that have had SSD's for years and years without a single failure. Most people don't buy an SSD for the reliability either. The shear speed is the attraction.

I am sure the attraction to SSDs isn't their reliability, but their speed. I am not questioning the attraction to SSDs, but merely this topic. The point of posting reliability estimates would be to challenge those who see SSDs as less reliable than HDDs, otherwise why do it?

I have had more flash media die on me than anything other than Floppy Disks in my 13 years using PCs. This makes me wonder about the reliability of SSDs. As a result, looking at this thread aims to counter that, but offers nothing in the way of proof. I can find many people who are still running HDDs from over 5 years ago. A matter of fact, I have ones nearing 10 years old in use right now and they are still spinning fine. That doesn't mean HDDs never die. But if I told you my HDDs was going to last me another "3 years, 2 months, and 9 days" I should be showing why that number is so accurate and isn't just pulled out of someone backside.

Again, this isn't an attack on SSDs, but an inquiring as to what the point of posting the "status" of your SSD if the status is hogwash.

I am sure the attraction to SSDs isn't their speed, but their reliability.

I can honestly say, of all the people I know with SSD's, all would have drawn a blank of why they got a SSD if you didn't count speed. Reliability simply has not been a factor for most.

I can honestly say, of all the people I know with SSD's, all would have drawn a blank of why they got a SSD if you didn't count speed. Reliability simply has not been a factor for most.

Edited. Thanks. I said that inverted. Next time I should proof read before I hit submit :|

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Yes, it was amusing at the time because even then dbrand was well known for stealing the designs of products from other companies. That’s what they do.
    • Didn’t Dbrand once complain that Casetify was ripping off their designs a well? seems pretty bad of them to try and get around Valve’s copyright this way with that in mind.
    • Dbrand thought they could get away with this Steam Machine case, Valve disagreed by David Uzondu Image via Dbrand Dbrand has cancelled its highly anticipated Companion Cube enclosure for the Valve Steam Machine, which it teased back in November of last year with a concept render and sign-up page, because it did not ask Valve for permission first before manufacturing the case. According to Dbrand, it took the "backwards approach" of building the product first before asking for permission from the copyright holder. Seven months of work went into the project, requiring over a thousand engineering hours from the design team. Workers developed forty-four sets of injection molding tools, making a unique mold for each sub-component of the crate. When the Companion Cube went live on Monday last week, it, according to Dbrand, quickly became the second-fastest-selling product in the company's fifteen-year history, racking up orders for hundreds of thousands of units. Customers eagerly bought the $129.95 deluxe edition or the bare-bones $99.95 version, which the manufacturer cheekily branded as the "Poverty Cube". It was around this time that the legal eagles at Valve descended on the accessory maker with a formal demand. The developer pointed out that the iconic block design remains protected intellectual property from the game Portal, so unlicensed sales had to stop. Dbrand said that all its pleas to salvage the project with the Valve team, including proposals to run a properly licensed release under official terms "with their blessing", fell on deaf ears, so it had no choice but to obey and remove every trace of the product from the internet. If you bought the enclosure, the company said that banks will process your refund by the end of this week, but if it still hasn't arrived in your account by then, you should not hesitate to contact support. The Steam Machine itself is a high-performance console that Valve designed directly to bring PC gaming into the living room. It was announced on 12th November 2025 (the same day Dbrand announced the Cube) and runs on the Linux-based SteamOS, the same OS that powers the Steam Deck. As for the price, due to the shortage of memory and storage chips, the hardware cost landed much higher than people were expecting, starting at $1,049 for the 512 model (without a controller) or $1,128 with the new gamepad. The premium 2 TB model pushes those prices even higher, selling at $1,349 for the standalone console and hitting $1,428 if you want the bundle.
  • Recent Achievements

    • Rookie
      Almohandis went up a rank
      Rookie
    • Apprentice
      jahara21 went up a rank
      Apprentice
    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      534
    2. 2
      +Edouard
      266
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      Steven P.
      97
    5. 5
      macoman
      57
  • Tell a friend

    Love Neowin? Tell a friend!