Recommended Posts

Hopefully this isn't a stupid question, but will these still be lauchned in Florida? or has this not been decided yet?

Just curious if all this history is going to stay in one place, however I would think there are much other reasons why they would want to continue lauching where they are at...

(I didn't even know where in Florida cape canaveral was till I just looked it up... and I was there before... lol - I thought it would be close to the sothern tip of florida.)

At first most missions will be Falcon 9/Dragon to ISS and Falcon 9 satellite launches with an orbital inclination relative to the ewuator of 15? to 50? +/- (ISS = 28.5?) and those are available from KSC.

Next come Falcon Heavy, a true monster capable of lifting 53+ metric tons, 2x as much as the Shuttle or any other launcher. With a hydrogen 2nd stage that could go up to 65+ metric tons. The main initial customer for it will be the National Reconaissance Office for large spy satellites going to polar orbit; an inclination of 80? to 90? which isn't available from KSC. To launch those SpaceX is modify pad SLC-4 East at the Vandenberg Air Force Base in California. First flight is probably late 2013 or early 2014.

http://en.m.wikipedia.org/wiki/Vandenberg_AFB_Space_Launch_Complex_4

Rumors are it'll also get mods allowing Falcon 9 to lainch there as well. These would consist o two integration buildings at 90? to each other; one for FH and the other for F9. An added plus is they could process 2 flights at once. Even if Vandenberg doesn't get the dual launch mod KSC will - that's a lock.

They also want access to one of the retired Shuttle pads for a super-heavy launcher should they compete (you know they will) for NASA's proposed Space Launch System, a rocket twice as large as Falcon Heavy - roughly 130+ metric tons to LEO. They already have a concept that large, Falcon XX, a nearly 400' tall behemoth that makes Saturn V look like a beanpole.

At first most missions will be Falcon 9/Dragon to ISS and Falcon 9 satellite launches with an orbital inclination relative to the ewuator of 15? to 50? +/- (ISS = 28.5?) and those are available from KSC.

Next come Falcon Heavy, a true monster capable of lifting 53+ metric tons, 2x as much as the Shuttle or any other launcher. With a hydrogen 2nd stage that could go up to 65+ metric tons. The main initial customer for it will be the National Reconaissance Office for large spy satellites going to polar orbit; an inclination of 80? to 90? which isn't available from KSC. To launch those SpaceX is modify pad SLC-4 East at the Vandenberg Air Force Base in California. First flight is probably late 2013 or early 2014.

http://en.m.wikipedia.org/wiki/Vandenberg_AFB_Space_Launch_Complex_4

Rumors are it'll also get mods allowing Falcon 9 to lainch there as well. These would consist o two integration buildings at 90? to each other; one for FH and the other for F9. An added plus is they could process 2 flights at once. Even if Vandenberg doesn't get the dual launch mod KSC will - that's a lock.

They also want access to one of the retired Shuttle pads for a super-heavy launcher should they compete (you know they will) for NASA's proposed Space Launch System, a rocket twice as large as Falcon Heavy - roughly 130+ metric tons to LEO. They already have a concept that large, Falcon XX, a nearly 400' tall behemoth that makes Saturn V look like a beanpole.

Sweet. I didn't really know that much science/math went into the launch pad location/angle (if I halfway understand this all correctly)... Interesting stuff, and any deeper it will go way over my head. lol

Thanks

Yup, certain sites are good for certain launch inclinations but there is another consideration: land overflight.

FH carrying a spy-sat to polar orbit from KSC would have to fly over land (E. Seaboar, New England & Canadsa or parts of S. America). If it comes down on NYC, Buenos Aires or Montreal someone might get a bit upset :p

At Vandenbrrg they could just launch over the Pacific waters well west of Baha & S. America.

FH from Florida could in theory miss S. America or eastern N. America if it were launched out over the Atlantic then made a turn, setting it up to go over one of the poles. Problem is that uses a lot of fuel, reducing the payload to orbit. Not very efficient.

  • 3 weeks later...

No links yet as the news is very fresh...

In a major coup SpaceX just stole a major launch conteact, Thaicom 6, from Europe's Arianespace. This is SpaceX's 8th international launch contract.

This also has to be giving China fits as they've had eyes on dominating the rapidly expanding Asian launch market. Just a few weeks ago they were publically fretting about SpaceX's prices, and now we know why.

Thaicom operates communications satellites with coverage from Africa to Japan. So far they've used the Arieane launcher, but today it was announced that Thaicom 6 is going up on Falcon 9 in 2013.

Thaicom 6 is a >$100M TV satellite weighing over 3,200 kilograms and will be built by Orbital Sciences of Dulles, Virginia. It will provide TV services to south and southeast Asia & south and eastern Africa.

competition is good, but something as massive as becoming a spacefaring civilization will require extensive regulation and an umbrella organization. time to get everyone at a table and get things done. undercutting may not be a good idea in this case, it may undermine the effort.

Read up on Mars Society President/engineer Robert Zubrin's proposals. This article is a summary by Jeff Foust of The Space Review, but there are links in it to Zubrins IoEd in the Wall Street Journal and his Mars Railroad propsal.

http://www.marssociety.org/home/press/tms-in-the-news/atransorbitalrailroadtomars

By the way: Sen. Richard Shelby, the main opponent to an open competition to develop NASA's Space Launch System (SLS), has thrown in the towel. The letter went to the NASA administrator last night. SLS is to have an 80-130 metric ton to low Earth orbit capability - something made for Mars & beyond.

This means SpaceX is in the hunt for SLS and the idea of using $$$$ pieces of the shuttle system, mainly the solid boosters, are far less likely to be in the plan.

Interesting side note to this is that they've been working on an engine, the Merlin 2, that is more powerful than the F1 used on the Saturn V moon rocket; 1.7 million lb-ft each, and they'd use 6 in their Falcon XX proposal. One big, powerful mother that would greatly exceed SLS's requirements.

SpaceX just "recruited" Orbital Sciences chief lobbyist.

Orbital Sciences is a major outfit wh not only launches but builds communications and other satellites. This guys contact list probably includes most of Congress and the administration, as well as all the other aerospace companies.

Nice guy to have on your team :p

http://www.spacenews.com/civil/110616-orbital-lobbyist-join-spacex.html

WASHINGTON ? Orbital Sciences Corp.?s top lobbyist, Mark Bitterman, is leaving the Dulles, Va.-based satellite and rocket builder for rival Space Exploration Technologies Corp., (SpaceX), according to officials at both companies.

Bitterman, a 19-year-veteran of Orbital Sciences, is stepping down as senior vice president of government relations effective June 17 to join SpaceX?s 10- to 15- person Washington office in mid-July. He will run the Hawthorne, Calif.-based rocket startup?s Capitol Hill activities, these officials said.

>

SpaceX, like Orbital Sciences, is under contract to start making supply runs to the international space station using commercially operated vehicles built with NASA?s financial assistance.

From Dr. Ralph Ewig, a Mission Operations Engineer at SpaceX -

Starting a Dragon?s Heart

This morning we booted up the Dragon 2 spacecraft for the first time. It was just a simple power-up to test all the avionics, sensors, and electrical systems, but with something this complex you always anticipate glitches.

However, everything worked flawlessly, and while to some this may seem like not that big a deal, to the people doing the work this moment of watching it light up the telemetry screens for the first time meant to wake a spacecraft that holds the blood, sweat, and tears of hundreds - and the dreams of thousands more.

By the end of this year it will carry those dreams to space with it, and do its part as another small stepping stone in humanity?s ongoing endeavor to build a bridge to the stars. Here?s hoping this Dragon?s temperament will be as benign in flight as it was at its first awakening

  • 2 weeks later...

Link....

Press Release ? June 16, 2011

$250,000 HEINLEIN PRIZE FOR ADVANCES IN SPACE COMMERCIALIZATION HONORS ELON MUSK

Trustees of the Robert A. and Virginia Heinlein Prize Trust announced today that the second-ever Heinlein Prize will go to Elon Musk, founder, CEO and CTO of Space Exploration Technologies (SpaceX).

The Heinlein Prize honors the memory of Robert A. Heinlein, a renowned American science fiction author. The purpose of the prize is to encourage and reward individuals for making practical contributions to the commercialization of space. Mr. Musk will be honored at a luncheon and award ceremony on June 29, 2011 at the Hyatt in Washington, DC and will receive $250,000, a gold Heinlein Medallion, the Lady Vivamus Sword (as described in Heinlein?s book Glory Road), and a Laureate?s Diploma.

>

If anyone's going to be in the area take pics & post :)

SPACEX DRAGON SPACECRAFT RETURNS TO FLORIDA

Public Viewings Available Through July 10, 2011, at the Air Force Space and Missile History Center

CAPE CANAVERAL, FL?On December 8, 2010, SpaceX became the first commercial company in history to launch, fly, land and recover a spacecraft from low Earth orbit. Now through July 10, 2011, that spacecraft, the SpaceX Dragon, will make its first public appearance in Florida since its historic inaugural flight.

SpaceX, in coordination with the Air Force Space and Missile History Center, will host a public viewing of the Dragon capsule through July 10 on the grounds of the History Center, located just outside the South Gate of Cape Canaveral Air Force Station (CCAFS).

(in the email a pic of Dragon C1 is here)

Dragon?s inaugural launch served as an important step toward ensuring the future of US-based space programs following shuttle retirement. Having the spacecraft back in Florida will serve as a reminder that the US has a strong future in space exploration, and that American vehicles will continue to launch from Florida after the last flight of Atlantis in July.

The Air Force Space and Missile History Center will offer extended hours to the public during this time, remaining open from 9:00 a.m. to 5:00 p.m., Monday through Sunday through the final date of the exhibit. The facility offers free public access and houses historic hardware and visual displays that highlight all active and deactivated CCAFS launch complexes from the past 50+ years of flight. Additionally, the Center features 10 large displays, including a Mercury capsule, Atlas and Titan rocket engines, and a launch console from Launch Complex 19 (Gemini Program).

?This spacecraft made history last December, and it started its space journey here in Florida. We are excited to bring Dragon back to the state. We are also pleased to work with the Air Force Space and Missile History Center to display Dragon for the public to see,? said SpaceX President Gwynne Shotwell. ?With the space shuttle now retiring, Dragon will serve a critical role in next-generation US space exploration programs.?

?Putting the Dragon capsule on display at the History Center will complement the current exhibits, which highlight past, present and future launch activities at Cape Canaveral Air Force Station,? said Emily Perry, Air Force Space and Missile History Center Director.

With an additional NASA demonstration flight slated for later this year from CCAFS, SpaceX will become the first U.S. commercial launch services company to successfully demonstrate and execute US-based cargo transport capability to the International Space Station through Dragon. Dragon is the first commercially manufactured space transport vehicle and will play a key role in the country?s next generation of manned space exploration initiatives.

# # #

About the Air Force Space and Missile History Center

The Air Force Space and Missile History Center is a 3,200-square-foot facility outside the gates of Cape Canaveral Air Force Station. The facility is open to the public and admission is free. In addition to numerous exhibits, the History Center features 10 large displays, including a Mercury capsule, Atlas and Titan rocket engines and a launch console from the Gemini Program. The History Center also features a gift shop that offers many unique aerospace-related items. To learn more, call 321-853-1919 or visit www.afspacemuseum.org (click on link to the History Center).

Taking over the Delta 2 launch processing center will help them up the Dragon & DragonLab flight rate. Once they modify the pad for Falcon Heavy launches (a 2nd integration barn 90? to the Falcon 9 barn) they'll need even more space.

Link....

A New Home for Falcon-9 Processing at the Cape

(Source: SPACErePORT)

Last month, Space Florida's board of directors approved several infrastructure investments at the Cape Canaveral Spaceport. One of those investments was apparently intended to meet SpaceX's need for expansion at the spaceport. With limited room at a Launch Complex 40 building for horizontal processing of Falcon-9 rockets, and scant extra room in the same facility for work on Dragon capsules, SpaceX was looking at excess facilities within the CCAFS Industrial Area nearby. With support from Space Florida and the Air Force 45th Space Wing, SpaceX is now modifying the Delta Mission Checkout (DMCO) facility--which formerly supported Delta-2 rocket processing--for Falcon-9 operations. (7/1)

The Falcon 9 first stage for the COTS 2 flight at SpaceX's Launch Complex 40 today, and the second stage arives tomorrow for integration.

Still no official decision on if the COTS 2 and 3 missions will be blended, but everything is in place to di it including the training of the current ISS crew.

If they do COTS 3 on this flight Dragon will berth at the ISS and deliver cargo, another first for a commercial spacecraft.

Development of Dragon's launch abort/propulsive landing system continues with the documentation of the work done so far and supporting documents being delivered to NASA last month. A test stand firing still looks to be on for Q2 of 2012.

cots2first.jpg

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • These are not "great" prices... just "less awful". Apparently "Those who forget the past are doomed to pay higher prices and think they've won."
    • Russia was able to invade Crimea because of those people. But my point is that I've personally heard how great it was to be "back in Russia" right afterwards - look how great it is now. I've asked you a question in another comment which you haven't answered, so I'll ask it again: is it better now without "Europrats"?
    • ZimaBoard 2 1664 Starter Kit review: it's a cool and affordable DIY NAS by Steven Parker IceWhale Technology reached out to me asking if I was interested in testing the ZimaBoard 2, and after convincing them to send me the Starter Kit, it arrived at my doorstep in May. A bit of background: it is a Shanghai-based Chinese company founded in 2020, which specializes in single-board servers and personal cloud solutions. From searching around online, user feedback on the company and ZimaOS is mostly positive, so we're off to a good start. In addition, I should probably point out that although they do not have a large portfolio of NAS devices, with just four of what they do offer, they seem to have covered everything from a relatively low-priced entry point with the ZimaBoard 2, right up to the high end, with the ZimaCube 2 Creator Pack that even includes an NVIDIA RTX PRO 2000. Anyway, as already mentioned, what we have today is the ZimaBoard 2 Starter Kit, and here are the full specifications: ZimaBoard 2 Model 832, 1664 CPU Intel Core N150 (4x E Cores/Threads, Max burst up to 3.6 GHz) TDP: 6W (Base) 10W (Max) Graphics Intel UHD Graphics 24 EUs (1.00 GHz) Memory 8 GB, 16 GB DDR5 4800MT/s non ECC SODIMM (soldered) Disk Capacity 60 TB (30 TB x 2) Supported RAID Types TRAID, TRAID +, RAID0, RAID1, RAID5, RAID 6, RAID 10 Storage 2 x SATA 3.0 6Gb/s Ports with Power Bootloader 32 GB, 64 GB eMMC Network 2x RJ-45 2.5 GbE PCIe 1 x PCIe 3.0 (via LPC) USB Ports 2 x USB-A 3.1 (5 Gbps) Display Mini-DisplayPort 1.4 (4K@60Hz) Hardware Transcoding Engine H.264, H.265, MPEG-4, VC-1 Maximum resolution: 4K (4096 x 2160); Maximum FPS: 60 Virtualization Intel® AES New Instructions Intel® Virtualization Technology (VT-x) Intel® Virtualization Technology for Directed I/O (VT-d) Size (H/W/D) 140mm x 83mm x 31mm Weight 0.4 kg (only ZimaBoard 2 device) Power 12v 5A Power Supply Warranty 1 year (Global) 2 Years (EU) OS ZimaOS v1.6.1 MSRP $339, $399 ($548.60) As you can see above, there are two variants of the ZimaBoard 2. The lesser variant has half the eMMC storage and 8 GB less RAM, although it also costs $60 less than the top variant we are testing today. The above pricing is only for the ZimaBoard 2. I put the MSRP of the Starter Kit next to it in brackets, although as of publishing, it is discounted to $534.50. The ZimaBoard 2 started life on Kickstarter and shipped to backers in August last year. It became available via the official website in late 2025 and Q1 2026. This hobbyist NAS contains the still relatively new N150 Intel CPU released in the first quarter of 2025, with support for DisplayPort 1.4, HDMI 2.1, although in this case, the memory is integrated into the board itself, so it will not be possible to upgrade or expand the amount. It also supports AV1 decoding, as well as H.264, VP8, VP9, H.265 (8 bit), and H.265 (10 bit). The different capabilities in the Alder Lake-N (and Twin Lake) series are listed below. Processor E-cores L3-cache Turbo clock GPU GPU-clock TDP Intel N355 8 6 MB 3.9 GHz 32 EUs 1.35 GHz 9 W Intel Core 3 N350 3.9 GHz 1.35 GHz 7 W Intel Core i3-N305 3.8 GHz 1.25 GHz 9 W Intel Core i3-N300 3.8 GHz 1.25 GHz Intel N250 4 3.8 GHz 1.25 GHz 6 W Intel Processor N200 3.7 GHz 0.75 GHz Intel N150 3.6 GHz 24 EUs 1 GHz Intel N97 1.2 GHz 12 W Intel Processor N100 3.4 GHz 0.75 GHz 6 W The CPU is part of the Twin Lake series that sits near the bottom of the N-series, designed for low- powered systems and entry-level laptops, and as such has a base level TDP of just 6W. As I have noted before, we are seeing another NAS with a great amount of RAM. It's important to mention that the ZimaBoard 2's memory is integrated into the base board (which is why they have two variants of it). As a reminder, up until a couple of years ago, it was commonplace to only get 2 or 4GB max on a flagship Synology or QNAP home NAS. Ever since the likes of TerraMaster and more have entered the market with ample RAM sizes included in their NAS offerings, it has gone a long way in forcing the hands of the traditional makers to up their game a bit. First impressions The Starter Kit came in one outer box with several packages inside it (shown above). I forgot to take pics of it because when it arrived, it wasn't clear what was inside, and I had to confirm with my contact that I received the entire Starter Kit. In the box ZimaBoard 2 ZimaBoard 2 HDD Expansion Bracket + PCIe card frame Zimaboard Mini DisplayPort Male to HDMI Female Cable 4K 60Hz Zimaboard PCIe 3.0 x4 to Dual NVMe M.2 SSD Adapter Card Quick guide [full online guide] Limited warranty notice Screws Design Where to start? You'd be forgiven for mistaking it as an SSD enclosure if not for all the ports on it. It is completely made out of metal, and the top is an entire heatsink. It has a premium feel about it, but it definitely looks like a hobby device. As you will see, the completed build looks like it belongs in a server or meter closet rather than as a showpiece on someone's desk. On what I am calling the rear, there's a Mini DisplayPort (1.4), two 2.5 GbE ports, with Type A 3.1 USB ports, and then the barrel connector port. Around the front, there are two SATA6 ports with a power connector in the middle. Left side Right side One side is completely free of ports. On the other there's a slit that allows for the feed of a CPU fan cable, and a PCIe 3.0 X4 slot. Top Bottom The top is entirely made up of a heatsink except for the extended height for the I/O on the rear. Around the other side, you can find the ZIMA branding and some regulatory information stamped near the bottom. As you may see from the bottom of the ZimaBoard 2, it scratches quite easily from just moving it around on my Ikea island. Teardown Before we get started, let's have a look at this thing on the inside. The steps to get to the board are as follows: Remove the four smaller Torx screws on the bottom of the ZimaBoard 2; Remove the four larger Torx screws on the sides of the device; Carefully unstick the CMOS battery from the PCB; Remove two Phillips screws on the PCB; Lift out the PCB. Yes, as you can tell from the instructions, you need three different tools to remove Torx and Phillips screws (10 in total), and unhelpfully, one of the screws is located under the CMOS battery, which is stuck onto the PCB. Building Now comes the fun part. Because the ZimaSpace website does not provide any guidance on how to put the Starter Kit together. They only have guidance for connecting the CPU fan. However, they did upload a video to their YouTube channel that shows the entire process. To install the fan, first remove the four screws on the bottom of the ZimaBoard 2, then on the inside, there is a CPU FAN connector where you can attach the fan, reattach the ZimaBoard 2 frame, and feed the fan cable through the provided slit. Then remove the nearest screw on the side and attach the fan frame to the side of the device using the same screw. ZimaBard 2 screws Aligning the screws Bottom view Remember those four screws we removed to access the CPU FAN? Longer screws are provided in the box with the HDD Expansion Bracket, which is what you will now need to attach the ZimaBoard 2 to it. Helpfully, the orientation on how to attach it is made obvious when the frame can only be screwed on at the same overall length as the ZimaBoard 2. If you do it the wrong way around (which is what I did initially) one side hangs off the frame, and it becomes difficult to attach the PCIe Adapter Card cable. PCIe card frame Other side PCIe slot connector Next, it's time to attach the PCIe card frame, which is fastened with the help of 3.5-inch SATA HDD (3 screws). These are toolless screws that you can just use your fingers to fasten them with. Then it is time to connect the provided PCIe cable with the slot connector on one side of the ZimaBoard 2, feed it through the bottom of the HDD frame, and fasten it with two standoffs. Both bracket options 2280 standoffs with 2x 4TB MP44Q The PCIe 3.0 X4 card comes with a short bracket option, handy if you decide to place it inside a different NAS or rack server, but here we need the long bracket. Oddly enough, the M.2 standoffs were preinstalled into the 22110 position, but extra standoffs are included in the box, which I installed at the 2280 position for our use. I added a couple of MP44Q M.2 PCIe 4.0 SSDs (2 x 4TB) that can be availed on Amazon for $478.99 (the lowest price for 3 months) that TEAMGROUP supplied us with Then we have the almost completed build, you just need to push the card into the PCIe slot. Unfortunately, IceWhale Technologies did not provide a screw for the PCIe card frame (this is also apparent in their own video). Here it is at several different angles, with the last pic showing the SATA Y-Cable connected to the two WD Red Plus 4TB drives. Setup and Usage Next, you connect your cables to the I/O, and the ZimaBoard 2 powers on automatically, as there is no power button on the device. Power is controlled through the Settings in ZimaOS. BIOS The ZimaBoard 2 includes an Aptio BIOS from American Megatrends [1, 2, 3], and you can setup pretty much everything here including the boot order, which is locked to the UEFI OS, however above that choice you can enable or disable booting to a SATA/USB bootloader so this would still allow you to switch to an alternative bootloader and boot from it, or disable it to instead always start from the first disk with an OS installed on it. Initial Setup Upon connecting to the LAN and booting up, the ZimaBoard 2 can be reached by navigating to the IP address (shown if you have a monitor connected), or you can find it using the ZIMA Client desktop application, which is essentially a Zima device finder. Initializing the ZimaBoard 2 The ZimaOS setup process is pretty straightforward, through a wizard, and in full above, it basically consists of setting up an account and some handy tips, and that's that! Post Setup (ZimaOS update) Upon first boot, you are alerted that there is a ZimaOS update from 1.5.0 to 1.6.1, which I applied; the full process is shown above with the changelog. ZimaBoard 2 Storage Setup Next, it is time to set up the storage. ZimaOS actually throws everything onto the eMMC flash drive; it is also the default location of AppData, which is definitely something to be wary about, as the 45GB available storage could fill up quickly. HDDs I first attempted to create a Storage Pool using the two 4TB WD Red Plus NAS drives, and got an error message: After several attempts and then looking online, I discovered it was a bug with ZimaOS where the fix was simply to reboot ZimaOS and then try again, this time I was able to create a RAID mirror using the two drives. SSDs I did the same for the SSDs, as you will see in the above gallery, when I created the second Storage Pool, it only allowed me to select available drives. ZimaBoard 2 AppData ZimaOS comes with an App Store that includes a repository of almost 400 apps, so you will be able to find most of what you'll need for a NAS (although after a quick search, I wasn't able to find a Surveillance Manager), and now comes the important part: moving the default AppData location off the 45GB eMMC and onto a larger volume: Open Settings Then Apps Then, in the Select a new location field, click on the new Storage volume you want to move it to (in my case, the Apps Storage Pool), which is the SSD RAID mirror. Confirm the Migration warning Be praised! You can also do this for Docker (which by default installs onto the 45GB eMMC flash drive) and the User database. Plex Setup Next, I tested the configuration by installing the Plex Server app from the App Store. The library folders must already exist (which I placed into the Storage Pool). Plex Server setup is straightforward and requires very little configuration. In my case, all I had to do was add the media path I just created, which you can also browse to using the folder icon in the path field. In addition, you can now map the new Media library in Windows Explorer using the Zima Client. Oddly enough, it is not possible to access the ZimaBoard 2 over the Network Neighborhood; you must map drives using the client, which is shown in the last image in the above gallery. I watched one of my Blu-Ray rips, which is Dolby Vision with Dolby Atmos, and the content played fine with no stuttering or buffering, which is what anyone needs in this scenario. ZimaBoard 2 Zima Client mobile app There's also a client for mobile. It is pretty barebones, as shown in the above gallery, for example, the Apps screen launches the WebUI for that app, and the Backup must be done manually. On opening Backup, you can select internal storage folders on your phone to backup to the ZimaBoard 2's storage, and although this is constantly scanned, the backup action itself must be manually triggered. There is an option to allow foreground backup (last image in the above gallery), but this basically means the queued backup gets triggered when you manually open the app. Benchmarking SATA PCIe 3.0 X4 A CrystalDiskMark test on a mapped network drive from within a Windows 11 25H2 PC (image above) connected over a 2.5 GbE was well within acceptable ranges. Writes were generally better on the SSD RAID mirror. SATA PCIe 3.0 X1 I also ran the NAS Performance tester, which tests the link speed performance. As you can see, it pretty much maxes out the 2.5GbE connection. Of course, you can also opt to bond the two 2.5 GbE connections for a bit more umph, but I didn't do that. Thermals Top PCIe card SATA HDDs Next, I measured some hotspots while playing content on Plex. It's fair to say this will perform better than a NAS that is enclosed in a metal or plastic case, as almost everything storage-wise is exposed! Anyway, the ZimaBoard 2 did not break a sweat with Plex streaming or disk benchmarks. ZimaOS Factory Reset ZimaOS does not include a factory reset option. Instead, you have to download the ZimaOS image and flash it to the eMMC manually. The flashing process is shown in the above gallery. The steps to do so are listed below: Download the ZimaOS image here; Open BalenaEtcher (Run as Administrator) and select the image; Select your inserted USB drive (min 8 GB) Flash to it; Connect your USB drive, monitor, keyboard, USB hub (optional), mouse (optional), and network cable (recommended) to the ZimaBoard 2; Connect power and press F11 continuously; Select your USB drive starting with UEFI in the boot device menu; Press Enter on the Install ZimaOS option; Select /dev/mmcblk0 (MMC) flash drive as target; Confirm with (three times) to wipe the target disk; Wait a couple of minutes while ZimaOS installs; Remove the USB drive and confirm with a reboot; Your ZimaBoard 2 has been factory reset. However, you don't have to stick with ZimaOS, in fact the company also offers official CasaOS images, that are based on Debian; or as they say themselves, put anything you want on this "hackable single board server" it's up to you. Conclusion I had a lot of fun putting this together. I've custom-built all my own PCs and servers since the 90s, and this is the first time I have had to put a NAS together. Even if the actual base ZimaBoard 2 was already a completed build, it still feels pretty custom. I just wish that IceWhale Technology included a getting-started guide in the box for the Start Kit, which would have really completed this kit. Instead, I had to search for the official video on the YouTube channel to make sure I wasn't doing anything wrong. So who is this for? Definitely the hobbyist who is comfortable building their own PC and servers. It also has a much smaller footprint than its nearest equivalent (in terms of specs), like the Beelink Me Pro, which is another NAS I will be testing soon. Although the Beelink does not come with the PCIe 3.0 X4 expansion, the ZimaBoard 2 Starter Kit suddenly looks to be a great bargain, even if it only offers the two 3.5-inch bays over the four in the other example. It makes a lot of sense to use Intel's N150 chip inside a NAS; it is more than capable of doing what the ZimaBoard 2 is intended for, media streaming and backup. It also looks like the IceWhale Technology staff are quite active in the official forums helping people with issues they come across with ZimaOS and the devices, peer support seems to be good as well, I was quickly able to find why I was not able to create a new Storage Pool in ZimaOS v1.6.1 even though that is quite a serious bug, hopefully it will be fixed in the next update. If you are comfortable with the command line and Docker, you'll be fine. You can do great things with this hardware. This was my first time with ZimaOS. It seems a bit barebones in comparison to the likes of Synology DSM, TOS, and UGOS, but it has a ton of apps to get you started with your home or small business NAS. Where to buy As of publishing, IceWhale Technology is running a discount of up to 5% for the Starter Kit. If you opt to get just the ZimaBoard 2 itself, it does come with a SATA Y-Cable, so you will be able to connect up to two 3.5-inch HDDs to it. ZimaBoard 2 1668 Starter Kit for $534.50 on Amazon US (was $548.60) ZimaBoard 2 832 Starter Kit for $372.88 on Amazon US (was $390.60) Zimaboard 2 1668 (16GB+64GB) for $419.90 on Amazon US Zimaboard 2 832 (8GB+32GB) for $359.90 on Amazon Disclosure: IceWhale Technology provided a free sample without any editorial input or review pre-approval. Good to know The Amazon link is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, when you purchase through links on our site, we earn from qualifying purchases.
    • It's in the Insider's group so yes it's technically beta, though these days it's hard to see much of a difference unless you opt for the most extreme beta builds, which I don't. When I moved here from the Release Preview channel I did so primarily because I wanted to see how well the restored taskbar functionality (restored from Win10, and earlier) is working and whether it was time to finally abandon SAB--and it is--working fine, so far. Not as polished as SAB, but it'll do for me.
    • I've been using MWB Premium for a number of years so that along with Windows updates and updated browser should be fine. Thanks for that.
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      488
    2. 2
      +Edouard
      220
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      Steven P.
      74
    5. 5
      FloatingFatMan
      70
  • Tell a friend

    Love Neowin? Tell a friend!