Recommended Posts

I just enabled Aero Glass and it's pretty cool. You need to have a pretty fast processor (this is very intensive especially with the 4074 explorer leak) and at least a 128mb DX9 compatible card with Pixel Shader 2.0. I have a RADEON 9600 XT and IMO it is the minimum for this effect. Also, you should probably make a registry backup or a restore point just for sh**s and giggles ;) . Follow these steps:

1. Start with a clean install. Seriously, if you don't start fresh there may be problems (i.e. i applied tweaks and fixes, especially the explorer leak fix, and the glass effect just wouldn't work!) Also, important, make sure the sidebar is active!

2. Download this skin (theme), extract it, and put the folder named "Aero" in the Windows/Resources/Themes folder. Then, open the folder, double click aero.msstyles, and click OK in the window (Display Properties) that pops up. NOTE: If the link above for the skin does not work (which it should), just search google for "dwm skins", or "ExplorerGlass-BOFH-Beta2.rar" and you should find it easily.

3. Add this key to the registry by following these instructions: Type "regedit" in the "Run" box on your Start Menu, then navigate to

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer

Right click in the window, then highlight "new", then "DWORD Value". Name it MILExplorer, then right click MILExplorer (you just created it) and select "Modify". Enter a 1 in the "Value data" box.

4. NOW restart your computer.

5. Once rebooted, go to the Start Menu, click on "Run" and type the following in the box to start DWM:

rundll32 c:/windows/system32/uxdesk.dll,DwmStartComposition

6. That's it! Aero Glass! COOL!

NOTE: You will not be able to use IE/Explorer (You won't see your windows) unless you enable DWM by following step 5 AS SOON as you reboot. Trust me, don't try to open any windows 'cause you won't see 'em unless DWM is started. Don't worry though, you can still get to the Start Menu and the "Run" box.

EDIT: I forgot to mention that DWM MUST be reactivated every time you reboot because it doesn't start automatically. As I explain in the NOTE, you won't be able to use explorer/IE if you don't. An easy way around this is to create a batch file and place it in your "Startup" folder so it will always initiate upon startup.

I did not create this skin nor did I come up with this method. This is just what I have found by looking around on the 'net for hours trying to figure out how to get this cool effect. The skin is BOFH's and is an example of his great work! Thanks.

post-97126-1110806668_thumb.jpg

Edited by CollegeGuy
Link to comment
https://www.neowin.net/forum/topic/296493-enable-aero-glassstep-by-step/
Share on other sites

Is this just for Longhorn? (i'm guessing by what forum this is in)

Can you get rid of it and/or change back to another theme without removing this one?

Do you need a patched uxtheme.dll file?

585614682[/snapback]

Yes, this is just for Longhorn (4074 only as far as I know). No, you can't change to another glass theme without removing this one (or at least moving it to another folder besides Themes) Use the one I specified or another glass dwm skin, if you find a good one, but if you do change to another glass theme, you'll have to move the old folder named Aero to a seperate location, as I'm pretty sure for this to work whatever theme you use for the glass effect has to be named "Aero". There is no need to patch uxtheme.dll, I'm pretty sure you only have to do that for XP.

Why don't you do step 5 in the registry?, in the Run section.

585614692[/snapback]

Sorry i don't quite understand the question, do you mean initiating the command from the registry, if so i didn't know that was possible. The way I explained works for me, but if you know what you're doing then by all means. :) My guide is simply the easiest way I found to do it.

Assuming the 'reg' command is available on Longhorn (it is on XP...) you can substitute step 3 with this:

reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer /v MILExplorer /t REG_DWORD /d 1

and step 5 with this (cred to The_Decryptor for this, see post above :)):

reg add HKLM\Software\Microsoft\Windows\CurrentVersion\Run /v Glass /t REG_SZ /d "rundll32 c:/windows/system32/uxdesk.dll,DwmStartComposition"

Would be nice to try this myself, but no Longhorn availble here. Thanks anyways CollegeGuy :)

i cant believe people are still playing around this old build, im just going to wait for the next pdc build and then for the beta1.....i havnt installed my pdc2004 longhorn for sooooo long

585623522[/snapback]

rofl beta 1 is coming before pdc and the m9 developer preview is coming at winhec before beta 1 :laugh: Whats even more funny is there never was a pdc 2004

/me laughs at all of you

there is an easy way to make it so that aero glass will work without dwm. it involves hacking a file though :p and finding the file is still a daunting task :)

but once thats done, you can run glass side/taskbars without turning on dwm :)

an example

(geez, i posted that pic in two threads already... >_<)

/me laughs at all of you

there is an easy way to make it so that aero glass will work without dwm. it involves hacking a file though :p and finding the file is still a daunting task :)

but once thats done, you can run glass side/taskbars without turning on dwm :)

an example

(geez, i posted that pic in two threads already... >_<)

585626088[/snapback]

http://www.aeroxp.net/board//index.php?showtopic=103

Some people in other boards (like this one ) wished they could be able to run the aero glass taskbar and the semi-transparent sidebar without the "bugginess" of having the DWM enabled.

If you dare hack a single DLL and exchange a couple characters (to keep CRC check from getting aware of the hack) then you can have the usual Jade theme working perfectly without needing to enable DWM nor needing to keep changing the registry one and other time just to keep that.

You'll need a good hex editor.

Here you go:

Start your hex editor and, with explorer, go to

WINDOWS\assembly\gac_32\System.Windows.Explorer\6.0.3708.0__a29c01bbd4e39ac5

Copy System.Windows.Explorer.dll now into System.Windows.Explorer.dll.bin

and stop Explorer.exe from task manager.

edit System.Windows.Explorer.dll.bin

With the hex editor, search for this string:

4d0049004c004500 (it's the equivalent of MILE in Unicode)

and replace it with:

49004d004c004500 (the equivalent of LIME) hence no CRC damage

Now rename System.Windows.Explorer.dll into System.Windows.Explorer.dll.bak

and rename System.Windows.Explorer.dll.bin into System.Windows.Explorer.dll

Start regedit from Task Manager and change the old DWORD value of MILExplorer into LIMExplorer

Restart explorer.exe from task manager.

Since the explorer windows are made out of code inside other libraries that don't pertain to the avalon interface, they will open as usual because there is no longer an MILexplorer entry telling them to expect DWM, and since the Avalon assembly-driven traskbar and sidebar run from the DLL we just changed, then the glass effect will appear in those two areas of your desktop. Result? your beloved glass without DWM bugs and no unneeded hassle!

Maybe Stan would like to integrate the procedure into a single, small EXE wink.gif

/me laughs at all of you

there is an easy way to make it so that aero glass will work without dwm. it involves hacking a file though :p and finding the file is still a daunting task :)

but once thats done, you can run glass side/taskbars without turning on dwm :)

an example

(geez, i posted that pic in two threads already... >_<)

585626088[/snapback]

Yes, that is true (Customization Pack for Longhorn 4074 by joejoe includes the reg hack), but going that route does not enable the glass effect for the explorer windows, and I'm pretty sure it may not enable the cool ALT+TAB effect either! Also, thanks to andyandy and Decryptor for those shortcuts concerning steps 3 and 5. They'll save you time, I'm sure! I haven't tested them, but I have every confidence they will work. I'll add them to the steps if successful (with nods to you guys of course)!

Edited by CollegeGuy
I just enabled Aero Glass and it's pretty cool.  You need to have a pretty fast processor (this is very intensive especially with the 4074 explorer leak) and at least a 128mb DX9 compatible card with Pixel Shader 2.0.  I have a RADEON 9600 XT and IMO it is the minimum for this effect.  Also, you should probably make a registry backup or a restore point just for sh**s and giggles ;) .  Follow these steps:

1. Start with a clean install. Seriously, if you don't start fresh there may be problems (i.e. i applied tweaks and fixes, especially the explorer leak fix, and the glass effect just wouldn't work!) Also, important, make sure the sidebar is active!

2. Download this skin (theme), extract it, and put the folder named "Aero" in the Windows/Resources/Themes folder.  Then, open the folder, double click aero.msstyles, and click OK in the window (Display Properties) that pops up.  NOTE: If the link above for the skin does not work (which it should), just search google for "dwm skins", or "ExplorerGlass-BOFH-Beta2.rar" and you should find it easily.

3. Add this key to the registry by following these instructions: Type "regedit" in the "Run" box on your Start Menu, then navigate to

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer

Right click in the window, then highlight "new", then "DWORD Value".  Name it MILExplorer, then right click MILExplorer (you just created it) and select "Modify".  Enter a 1 in the "Value data" box.

4. NOW restart your computer.

5. Once rebooted, go to the Start Menu, click on "Run" and type the following in the box to start DWM:

rundll32 c:/windows/system32/uxdesk.dll,DwmStartComposition

6. That's it!  Aero Glass! COOL!

NOTE: You will not be able to use IE/Explorer (You won't see your windows) unless you enable DWM by following step 5 AS SOON as you reboot.  Trust me, don't try to open any windows 'cause you won't see 'em unless DWM is started.  Don't worry though, you can still get to the Start Menu and the "Run" box.

EDIT: I forgot to mention that DWM MUST be reactivated every time you reboot because it doesn't start automatically.  As I explain in the NOTE, you won't be able to use explorer/IE if you don't.  An easy way around this is to create a batch file and place it in your "Startup" folder so it will always initiate upon startup.

Exactly.

This a hack, and thus it will work for *any* graphics card. However, the DX 9 support is a must if you want any decent speed. I tried it with my AIW 8500DV. While it still works, it is dog-slow. Other Web browsers (Netscape, Opera, Firefox, etc,) still work without this hack.

Made a whole Package of Customization....and even easier...

http://joejoe.ath.cx/

585654491[/snapback]

You have a great customization pack. It's just, I tried it and was unable to get the transparent glass effect. After much researching, I made this step by step guide. Your customization pack includes screenshots of a great looking desktop with glass explorer windows, but no real way to do it (believe me I tried). So I wouldn't say it's neccessarily easier (or possible without some research and skins) to attain the glass effect with your package. Of course, your batch files do speed up the process of enabling DWM, but as I explained earlier this is just the easiest way for me. It would be great if you could include some transparent glass skins in your package so the screenshots you include are actually attainable. Or maybe you could just included a more detailed guide on how to attain the effect using skins, so people such as me wouldn't have to spend so much time trying to figure out how to make ours look like the screenies. Great pack otherwise! Thanks joejoe :)

PGHammer, actually, the effect won't work with *any* card. Believe me, I had a 64mb Geforce 2 MX400 before and it was worthless when it came to this effect (see screenie below). I even started another thread a while ago asking for advice on the type of card I would need for this effect. After many replies I settled on the 9600XT. It works great. After considering their replies, I believe the card must be DX9 compatible for the effect to work at all. Or at least a higher end card.

post-97126-1112096157_thumb.jpg

It's proven to work on MX440's with some exact drivers from NVidia, and anyways, the MX440 is a DX8 card.

585695213[/snapback]

The 8500DV is also a DX 8 (specifically 8.1) card, which is why the effect works (albeit very slowly). However, DX 9 and 128 MB (of course, 256 MB makes performance even snappier) makes the performance reasonable. (I got my replacement AIW 9700 Pro back and am posting this from my LH drive with AeroGlass active....*very nice*.)

The 8500DV is also a DX 8 (specifically 8.1) card, which is why the effect works (albeit very slowly).  However, DX 9 and 128 MB (of course, 256 MB makes performance even snappier) makes the performance reasonable.  (I got my replacement AIW 9700 Pro back and am posting this from my LH drive with AeroGlass active....*very nice*.)

585710898[/snapback]

Tried it with a 9700 Pro as well, works amazingly well =).

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • All these CEOs got the biggest boners thinking about firing employees for AI. Turned out it was just a wet dream.
    • And the fact that the majority of people from Poland are white European Christians while the people you are complaining about in post after post are not is just a coincidence... Every sentence in your post I am replying to is racist nonsense. None of it is actually based on any facts whatsoever. All immigrants are seeking a better life too. It's literally the only reason they would risk everything and leave their homes, families, and homeland. They are working and contributing to the economy too, as you even admit. They get the same benefits your partner did AND that YOU are eligible for as well. That is one of the key things of the EU and a mark of a civilization. That is the definition of a society where everyone is given a chance, treated equally and fairly, and is judged by the content of their character, not their different skin color or which version of ignorant superstitious nonsense their parents lied about as children. Racists around the world said the same things about the Irish and Jews and Poles (like your partner) and...every other immigrant movement over the centuries. What's your family's heritage, by the way? Were your ancestors lied about with racist fearmongering crapola by self-entitled locals the same way as you are now? If someone like that said the same things about all people from Poland, like your partner, would they be right? Or would you want them to judge your partner based on who they actually were, not where they just happened to come from?
    • Again, this is an irrelevant attempt to attack the messenger. The truth does not require any justification.
    • Removed the blue and underline as you did not post a link. This would also  be considered spamming.
    • Why it's almost impossible to produce a smartphone in the United States by Hamid Ganji If you look at the back of some Apple products, you can see the famous phrase “Designed by Apple in California, Assembled in China.” This phrase appears on products from one of the largest smartphone brands in the United States. These products are designed in the U.S., but their manufacturing takes place in China, India, Vietnam, or even Brazil. But why can’t Apple, as one of the largest American tech companies, produce its iPhones on U.S. soil? The idea for this topic came to me after the Trump Foundation launched a smartphone called the T1 and claimed that it was designed and built with American values in mind. However, this claim did not last long, as it was revealed that Trump’s phone was actually a rebranded HTC U24 Pro, with only a gold case and minor internal component changes. You see? Even a phone that is supposed to represent American values is manufactured in China. With a gross domestic product (GDP) exceeding $32 trillion, the United States is currently the world’s largest economy, while China ranks second with around $20 trillion. On the other hand, the United States is by a wide margin the global leader in various technological fields, and American companies spend hundreds of billions of dollars annually on research and development. From Apple and Google to Microsoft, Lockheed Martin, Boeing, and others, American tech and industrial giants lead their foreign competitors in many sectors. The United States also has no shortage of smartphone brands. Apple, Google, and Motorola are among the major brands in the smartphone market, collectively holding a significant share. However, the vast majority of their products are manufactured outside the United States. So why is it that the world’s largest economy, home to the most advanced technology companies and industrial powers, cannot produce a smartphone on its own soil? Let’s explore this question together. Even threats to impose tariffs won’t work After Trump entered the White House as the 47th President of the United States, his administration adopted strict tariff policies. One of these policies was the imposition of a 25% tariff on smartphones manufactured outside the United States. Trump said he “had a little problem” with Apple CEO Tim Cook over producing smartphones outside the U.S. So he thought that threatening a 25% tax on imported phones might force Apple to bring manufacturing back to the United States. “I have long ago informed Tim Cook of Apple that I expect their iPhones that will be sold in the United States of America will be manufactured and built in the United States, not India, or anyplace else,” Trump wrote on Truth Social. Image via The White House Although Apple currently manufactures some of the iPhone’s chips in the United States with TSMC's help, it still shows no willingness to shift full iPhone production to the country. At the time, renowned Apple supply chain analyst Ming-Chi Kuo wrote on X, “In terms of profitability, it’s way better for Apple to take the hit of a 25% tariff on iPhones sold in the US market than to move iPhone assembly lines back to the US.” However, manufacturing a smartphone in the United States is not as easy as it might seem, and many technical and economic barriers are involved. The lack of necessary manufacturing hubs There is a clear reason why many companies prefer to manufacture their products in China. China has established itself as the main global manufacturing hub for international companies, and over the past few decades, large contract manufacturers have emerged there, allowing companies like Apple to outsource production. One such example is Foxconn, which also manufactures some Apple products in India. Building the infrastructure required to produce smartphones in the United States would require tens of billions of dollars in new investment. Factories would need to be built, essential manufacturing equipment would have to be installed, and, most importantly, a skilled workforce capable of operating these systems would need to be recruited and trained. The United States currently lacks the core infrastructure needed to manufacture smartphones, and for this reason, many companies prefer to outsource production to Chinese contractors rather than spend tens of billions of dollars to build that infrastructure, which is significantly more economically efficient. Additionally, building such infrastructure in the United States could take up to a decade, ultimately leading to a significant increase in the product's final price for consumers. Shortage of trained labor in the U.S. compared to China Decades of serving as a global manufacturing hub have allowed China to build a massive talent pool in the production sector that is almost unmatched worldwide. Today, if a company chooses to manufacture its products in China, it can be confident that the workers involved in production have years of experience in their respective roles and are capable of producing high-quality goods with minimal errors. Even if we assume that tens of billions of dollars were invested in building smartphone manufacturing infrastructure in the United States, finding skilled workers would remain highly challenging. Apple CEO Tim Cook visiting the iPhone 6 assembly line in China in 2014. Image: Tim Cook on X In a 2015 interview on CBS’s 60 Minutes, Tim Cook said the main reason Apple isn’t producing in the US is a lack of skills. "China put an enormous focus on manufacturing, in what you and I would call vocational kind of skills. The US over time began to stop having as many vocational kinds of skills. I mean you could take every tool and die maker in the United States and probably put them in the room that we're currently sitting in. In China you would have to have multiple football fields,” Cook said. Also, in 2017, at the Fortune Global Forum in Guangzhou, Cook once again emphasized the importance of highly skilled Chinese workers. “China has moved into very advanced manufacturing, so you find in China the intersection of craftsman kind of skill, and sophisticated robotics and the computer science world. That intersection, which is very rare to find anywhere, that kind of skill, is very important to our business because of the precision and quality level that we like. The thing that most people focus on if they’re a foreigner coming to China is the size of the market, and obviously, it’s the biggest market in the world in so many areas. But for us, the number one attraction is the quality of the people,” Apple CEO said. Higher labor costs in the United States Producing almost any product in the United States is more expensive than in many other countries, and one of the main reasons is the higher cost of labor in the U.S. According to the Bureau of Labor Statistics, median weekly earnings of full-time workers in the United States were $1,235 in the first quarter of 2026. Meanwhile, the average annual salary in China's private sector in 2025 was RMB 71,590 (US$9,961). In many parts of the world, the weekly wage of an American worker is equivalent to several months of income. Another important factor to consider is that in the United States, the workforce capable of working on a smartphone assembly line is highly specialized and therefore commands higher-than-average wages. According to an estimate by Bank of America, producing an iPhone in the U.S. is technically possible, but “iPhone cost can increase 25% purely on higher labor cost in the U.S.” However, this 25% increase applies only if final assembly is performed in the United States while components are still sourced from China or elsewhere. In this case, the price of a base iPhone would rise from $799 to around $1,000. But in another scenario, if Apple were to produce the required components for the iPhone within the United States, production costs could increase by more than 90%. Trump’s dream for a “Made in the USA” iPhone might never come true In a free-market capitalist economy, one of the primary responsibilities of any CEO is to maximize profit. Using Apple as an example, Tim Cook’s role is to maximize the company’s profits so that it can fund research and development for new products and invest in areas such as artificial intelligence, while also keeping shareholders satisfied. Therefore, it is entirely understandable that Apple would choose not to bring its manufacturing back to the United States and instead keep production in countries where labor is cheaper, and products can be manufactured at a lower cost, thereby maximizing its profit margins. What is your opinion about manufacturing smartphones in the United States? If you are an American citizen, would you be willing to pay hundreds of dollars more for a smartphone made domestically in the USA? Let us know in the comments.
  • Recent Achievements

    • Conversation Starter
      jessse3334 earned a badge
      Conversation Starter
    • Reacting Well
      JuvenileDelinquent earned a badge
      Reacting Well
    • One Month Later
      Excellence2025 earned a badge
      One Month Later
    • Week One Done
      Excellence2025 earned a badge
      Week One Done
    • Week One Done
      flexorcist earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      506
    2. 2
      +Edouard
      196
    3. 3
      PsYcHoKiLLa
      153
    4. 4
      Steven P.
      72
    5. 5
      FloatingFatMan
      65
  • Tell a friend

    Love Neowin? Tell a friend!