Recommended Posts

So far I've been using point and shoot cameras but i find them limiting and not very good at low light conditions.

I've started reading the tutorials at http://www.cambridgeincolour.com so I can understand what I'm looking for.

Obviously lenses are as much (or even more) important as (than) the camera itself and I'll need different ones depending on the scene.

Here is the kit I've chosen so far :

Nikon D5100 + Nikon AF-S DX VR Zoom-Nikkor 18-55mm f/3.5-5.6G + Nikon AF-S DX VR Zoom-Nikkor 55-200mm f/4-5.6G IF-ED + Nikon CF-EU05 SLR System Bag + SanDisk SD Ultra 4GB HC

There is a kit with Nikon AF-S DX Nikkor 18-105mm f/3.5-5.6G ED VR instead of the two lenses above

Is it a bad idea to buy a kit?

Are those lenses good (landscape/portraits)?

Is Canon 600d better?

Will it produce decent video too?

etc. Please advice

Link to comment
https://www.neowin.net/forum/topic/1055794-first-dslr-advice-needed/
Share on other sites

I agree with Andre, the 18-105 will surely be a better quality lens even though you'll be limited at the telephoto range (though honestly, one doesn't really use telephoto that ofter unless you're into sports or wildlife) but the addition of the wide aperture prime will be nice.

As for D5100 vs. 600D both should be fine, 600D is supposed to be a bit more configurable for video but the sensor on the D5100 is very nice for stills.

I agree with Andre, the 18-105 will surely be a better quality lens even though you'll be limited at the telephoto range (though honestly, one doesn't really use telephoto that ofter unless you're into sports or wildlife) but the addition of the wide aperture prime will be nice.

As for D5100 vs. 600D both should be fine, 600D is supposed to be a bit more configurable for video but the sensor on the D5100 is very nice for stills.

Is the 18-105mm good for everyday use (both portraits with shallow dof and landscapes) and will it replace both 18-55mm and 55-200mm (not going for sports/wildlife)?

I would recommend getting the kit with the 18-105, it is convenient to have the zoom range without stopping to change lenses, and carry only the camera with you.

I've been using the 18-105mm with a D90 for my casual photography ever since I bought my DSLR and still find it the most general purpose. It is the only lens I took with me to uni. It may not have the nice bokeh of a 1.8 but will the job. Another reason I would recommend it is that it will introduce you to different areas of photography. You will then be able to buy more specialist lenses according to the area that you like ( portrait, macro, etc.)

I've included some of my photographs taken with the lens (please note the photographs have been modified):

At 18 http://flic.kr/p/8EeG72

At 105 http://flic.kr/p/8gdwCV and http://flic.kr/p/8kigtV

18-105 at 105mm f/5.6 at close range (1-2 meters) should give you a nice blown out background for close up portraits, given the subject is far away from the background. For landscapes, in general, you would want to shoot at smaller apertures (ie f/8 or f/11) to have as much in focus as you can.

Overall, 18-105 is a good start. Do consider a fast prime lens, ie 35/1.8 DX or maybe even 50/1.4.

I dont know much about the Nikon's, so I'll only comment on the Canon. The 600D is a very capable camera. The 18-55mm lens will be a good starting lens as its got IS. I'm surprised you're not adding a Telephoto lens instead of a 50mm prime though.

A note about the 50mm f/1.8 II - Its made of plastic (with glass elements ofcourse). The build quality is good enough but its classed as a disposable lens. Dont expect it to be the same as the 18-55mm. The f/1.8 will give some great shots with amazing DoF (Depth of Field). Much more so than the 18-55mm will. Just remember that with prime lenses, YOU need to move to achieve the zoom. It changes how you shoot.

The 600D does come with two other kit-lens options. With a 18-135mm IS, which like the Nikon with 18-105 will give you a much better range. Or as a 18-55mm IS and 55-250mm IS kit. This will be the most expensive of the options.

If you want a good landscape lens, then forget the 50mm. Its a portrait lens, through and through. Look at the 24mm f/2.8 (?353.00), 28mm f/2.8 (?163.99) and 35mm f/2.0 (?217.90) options. Remember none of these are USM or IS lenses. http://www.the-digital-picture.com have reviews of all three and most other Canon lenses.

The Nikon bag, Personally I wouldnt bother with. Get a LowePro Sling Shot bag. They're the most typical starting bag. They offer a very good range of features and a pretty good carrying solution. if you're specifically after a shoulder bag, then maybe look at the LowePro Passport Sling. Ultimately it depends if you want a pure photo bag, or a bag that can be used for more than just the camera.

If you're going to continue looking at the Nikon cameras, then the 18-105 sounds like the best option. i've no idea how it compares optically, but it offers a much better range.

If you want someone to tell you whether to go Nikon or Canon, then my advise would be to go play with both in your local camera store and see which you prefer. Personally I went for Canon as I prefered the handling of the 400D (back when I bought my first DSLR). Whichever you choose now, stick with.

Remember that when buying camera gear, invest heavily in Lenses! The body is worthless after a couple of years, however the lenses can go on to be used on many future cameras.

i personally have a nikon d5100, (after upgrading from the d3100) with the 18-55 lens and i purchased the nikon 70-300 vr, these are both excellent and enabled me to take some excellent photos at the singapore gp last year, certainly recommend this one :)

keep in mind that you won't be able to use old lens with that camera. I mean, old lenses will not autofocus as that camera doesn't have the focus motor built in. That is one of the reasons why they can sell them that cheap. You will need AF-S Nikkor lenses to be able to focus.

For exemple, I have the old Tamron 17-50 f/2.8 but my wife can't use it on her D5100 because it won't focus.

adding this as possibility (relatively same price range)

Canon EOS 600D + Canon EF-S 18-55mm f/3.5-5.6 IS II + Canon EF 50mm f/1.8 II

+1 to the canon...I believe most if not all Nikon use plastic rather than glass (which canon use) in the lenses

keep in mind that you won't be able to use old lens with that camera. I mean, old lenses will not autofocus as that camera doesn't have the focus motor built in. That is one of the reasons why they can sell them that cheap. You will need AF-S Nikkor lenses to be able to focus.

It is more an issue of artificially segmenting the market than actual cost, adding a motor to the D3100/D5100 would hardly add $3 to the production costs but would make the jump from D5100 to D7000 harder to justify. Sony, Pentax (and I think Canon) have motors on even their "lowest-end" $500 w/lens bodies.

As a photographer, Get a system that fits your style of shooting. sport shooting? then you'll need one with fast frame rates. But remember, the equipment doesn't make the photographer

Agreed! Try them both. See what fits your constitution. :)

Thanks all!

So far I've decided to get nikon 5100 + 18-105mm (plus some primes in future). Canon 600d seems to have better video capabilities but is more expensive here (especially the lenses for it).

One last thing - noticed nikon release the 5xxxx cameras around April, should i wait to see if there is a new model this year or there is no chance for this. If there is I can get the newer (with more features) or 5100 for less money. There is a rumor for 3200 coming soon

I have the Nikon D90 with that 18-105 lens and find it to be a great all around shooter.

Some examples taken with that lens:

https://rosszone.com/pack-place

https://rosszone.com/drhumor-building

https://rosszone.com/playtime

https://rosszone.com/dyc-alone

Side note: I'd definitely recommend getting the add-on battery grip.

So I don't have to make another topic of the exact same name... I was looking at getting the Canon EOS Rebel t2i if I get any significant amount of money from tax returns... I would use it for both video and photography, what would be a good lens in the $100 range to get for it?

Thanks all!

So far I've decided to get nikon 5100 + 18-105mm (plus some primes in future). Canon 600d seems to have better video capabilities but is more expensive here (especially the lenses for it).

One last thing - noticed nikon release the 5xxxx cameras around April, should i wait to see if there is a new model this year or there is no chance for this. If there is I can get the newer (with more features) or 5100 for less money. There is a rumor for 3200 coming soon

excellent choice you wont be disappointed, the next 5*** series wont be out till next year

So I don't have to make another topic of the exact same name... I was looking at getting the Canon EOS Rebel t2i if I get any significant amount of money from tax returns... I would use it for both video and photography, what would be a good lens in the $100 range to get for it?

I would, in your shoes get something along the lines of the t2i with a EF lens (not EF-S), EF lenses will give you much better results. now that being said, when you ARE ready to upgrade to a camera that's only able to use EF lenses, you have saved yourself that money for a lens and can splurge on the camera body. I went froman old Canon 400D(xti) to a 5DMarkII. so I didn't need to buy a lens for the new body.. i already had it .. just trying to save you some $$$

I'm not a Nikon guy myself (just a matter of preference), but I have used the D5100, great camera, can't go wrong with it. Also, I'd take the 18-105mm, I don't think you'll be needing the 55-200mm. Next step, get a cheap prime, a 35mm or a 50. However, if you want to go with Canon, you can probably get a pretty good deal on the 550D, I happen to own one and I can't complain, it shares the same sensor as the 600D, so image quality is basically the same. Unless you really want that flip-out screen and built-in wireless flash control, I'd go with the 550D + the 18-135mm.

I would, in your shoes get something along the lines of the t2i with a EF lens (not EF-S), EF lenses will give you much better results. now that being said, when you ARE ready to upgrade to a camera that's only able to use EF lenses, you have saved yourself that money for a lens and can splurge on the camera body. I went froman old Canon 400D(xti) to a 5DMarkII. so I didn't need to buy a lens for the new body.. i already had it .. just trying to save you some $$$

Well I don't think I'd be upgrading for a long while, so I think I'll go the t2i with EF lens for now.

Well I don't think I'd be upgrading for a long while, so I think I'll go the t2i with EF lens for now.

also, you'll be working with a crop factor of 1.6 due to the APS-C sensor. long story. so with a crop factor of 1.6. so we'll say if you are using a focal distance of 200 meters. that being 200 meters on a lens that has 200 meters. with the crop factor of x 1.6, you actually will have an effective focal distance of 320 meters. that means, if you had a full frame sensor, I would be using a lens of 320 meters to be at the same level of focal length as you or vice versa

This topic is now closed to further replies.
  • Posts

    • Qualcomm takes on NVIDIA with new Dragonfly CPU and AI chips by Pradeep Viswanathan Microsoft, Google, Amazon, AMD, Meta, Apple, OpenAI, and several others have been developing their own chips for AI infrastructure. However, NVIDIA still remains the dominant player in the market. Today, Qualcomm announced a major expansion of its data center infrastructure portfolio to better compete with NVIDIA. The new lineup includes the Qualcomm Dragonfly C1000 CPU, Qualcomm High Bandwidth Compute technology, the Dragonfly AI300 inference accelerator, new connectivity products, and custom silicon solutions. Qualcomm claims that this new lineup improves performance per watt, token throughput, and total cost of ownership for AI data centers. The Dragonfly C1000 is a new data center CPU built with Qualcomm’s custom Oryon cores. This chip will feature more than 250 cores, frequencies above 5GHz, and a chiplet-based design. Qualcomm claims that this new C1000 can deliver more than 2x better performance per watt compared to existing server CPU offerings based on specifications. The Dragonfly C1000 will support PCIe Gen 7 with more than 2TB/s of connectivity, along with CXL, advanced RAS features, and both air and liquid cooling. Qualcomm expects the Dragonfly C1000 to be commercially available in 2028. Additionally, Qualcomm and Meta announced a multi-year, multi-generation agreement under which Qualcomm will supply Dragonfly C1000 data center CPUs for Meta’s next-generation server fleet. Qualcomm also announced High Bandwidth Compute, a new near-memory computing architecture designed to address AI’s memory bandwidth bottleneck. HBC Gen 1 will debut with the Dragonfly AI250, which is expected to sample in mid-2027. The AI250 will deliver 133TB/s per card, an 18x increase in effective memory bandwidth compared to the AI200 with LPDDR5X. The new Dragonfly AI300 with HBC Gen 2 is a rack-level AI inference platform from Qualcomm. Qualcomm claims that the AI300 can deliver 4x to 8x better performance per watt compared to existing GPU-based architectures based on memory bandwidth per watt per card. The Dragonfly AI300 is expected to be available in 2028.
    • IBM reveals sub-1nm chip technology, production expected in another 5 years by Pradeep Viswanathan TSMC is now leading the chip manufacturing industry with its 2nm-class process node called N2. Samsung Foundry also has a 2nm-class process node called SF2. TSMC says N2 entered volume production in Q4 2025. Samsung says SF2 started mass production in 2025. Today, IBM announced the world’s first sub-1-nanometer chip technology, marking another major semiconductor research milestone. The new technology is based on a 0.7nm, or 7-angstrom, node and uses a new transistor architecture called “nanostack.” The new design vertically stacks and staggers nanosheet-based transistors so that more components can fit into the same chip area while also improving performance and power efficiency. IBM claims that this new sub-1nm chip can pack nearly 100 billion transistors onto a chip the size of a fingernail. This offers almost twice the density, up to 50 percent higher performance, or 70 percent better energy efficiency when compared to IBM's 2nm node design announced back in 2021. Also, IBM mentioned that this new architecture can deliver 40 percent SRAM scaling. It is important to consider that this announcement from IBM is a research milestone rather than a near-term process node launch. Back in 2021, IBM unveiled the world’s first 2nm chip design, claiming 50 billion transistors on a fingernail-sized chip and major performance and efficiency gains. Five years later, IBM’s 2nm technology has still not entered mainstream commercial production. That is because IBM is no longer a major commercial chip manufacturer. It sold its chip manufacturing business to GlobalFoundries years ago and has since then focused only on semiconductor research, IP development, and partnerships. To productize its 2-nm chip technology, IBM partnered with Japan’s Rapidus, but it has not resulted in anything shipping at scale. IBM says that its new sub-1nm technology can reach production as early as within the next five years. If that happens, it will likely depend on manufacturing partners, advanced EUV tooling, and years of yield improvements.
  • Recent Achievements

    • Week One Done
      Meta Plast earned a badge
      Week One Done
    • First Post
      kinowa earned a badge
      First Post
    • Rookie
      krychek57 went up a rank
      Rookie
    • Grand Master
      Jaybonaut went up a rank
      Grand Master
    • One Year In
      Philsl earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      461
    2. 2
      +Edouard
      171
    3. 3
      PsYcHoKiLLa
      136
    4. 4
      Michael Scrip
      78
    5. 5
      Xenon
      77
  • Tell a friend

    Love Neowin? Tell a friend!