Recommended Posts

I think 7 days is actually very good...look at the kindle...1 month battery say the specs, but it doesn't have always on features like bluetooth and only updates when you turn a page (maybe 100-150 a day for an intense book reader)...the pebble update every single min thats 1440 a day...arround 10x as intense usage + bluetooth...I'm surprised it even lasts 7 days when the battery and everything else fits on your wrist!

I don't disagree at a technical level.

But it's being sold as a watch. For decaded we have been able to put a watch on without charging it. The expectation of a "watch" has been set.

I don't disagree at a technical level.

But it's being sold as a watch. For decaded we have been able to put a watch on without charging it. The expectation of a "watch" has been set.

Fair enough, and I suppose I get what you mean...

I suppose the way to think of it is that phones used to last for weeks at a time...with the invention of smartphones battery life has been reduced to 2days at tops...but people accecpt this because of the extra features a smartphone has over a phone...the pebble is a smartwatch...so on that basis people will expect shorter battery life...and most probably accept it.

Though I do agree BT 4.0 would be sensible...they might even consider it now that have this much funding, they have said they're looking to add features, already have with waterproofing it that was at the $1mil mark so maybe 3.5 or 4 will bring 4.0.

So, BT4 has significantly lower power requirements?

Bluetooth version 4.0 supports a new Bluetooth Low Energy (BLE) technology. Only devices connecting via the BLE protocol will have a lower power consumption, allowing them to operate off coin/button cells. While BLE is only good for transferring small data chunks, the classical/standard Bluetooth protocol is still there in Bluetooth 4.0 for the "heavy duty" data streaming.

BLE can reduce max. current needed by 0.5 when compared to classical Bluetooth (from ~30mA to ~15mA). Furthermore, according to Wikipedia, average power consumption of a BLE device can be as little as a hundredth of a standard Bluetooth device.

(Comparison table: http://en.wikipedia.org/wiki/Bluetooth_low_energy#Technical_details)

And so would be suitable for a watch-sized device?

Yep. BLE was actually made with smart watches in mind.

I'm not particularly sure why the Pebble team didn't already start off using Bluetooth 4.0. Perhaps it's due to the limited number of BLE-compatible devices. I know the iPhone 4S supports it, do any Android devices?

Yep. BLE was actually made with smart watches in mind.

I'm not particularly sure why the Pebble team didn't already start off using Bluetooth 4.0. Perhaps it's due to the limited number of BLE-compatible devices. I know the iPhone 4S supports it, do any Android devices?

Yeah a few including the new HTC One series

http://reviews.cnet....01637_21718227_

They've reached $4mil now...so hopefully we'll find out if they're gonna put BT4.0 in soon.

Yeah a few including the new HTC One series

http://reviews.cnet....01637_21718227_

That list features only ~5 smartphones. It's no surprise then why they didn't bother releasing a watch based on BLE/Bluetooth Smart connectivity. I suppose that they could add dual-mode Bluetooth 4.0 chipsets, which can support both standard and low energy Bluetooth, now that they have a lot more money.

That list features only ~5 smartphones. It's no surprise then why they didn't bother releasing a watch based on BLE/Bluetooth Smart connectivity. I suppose that they could add dual-mode Bluetooth 4.0 chipsets, which can support both standard and low energy Bluetooth, now that they have a lot more money.

Bluetooth is backwards compatible, always has been...4.0 will work with any older version, just if you connect it to a 3.0 or lower phone you won't get the power saving.

Bluetooth is backwards compatible, always has been...4.0 will work with any older version, just if you connect it to a 3.0 or lower phone you won't get the power saving.

Single-mode Bluetooth Smart devices are not backwards compatible. Dual-mode chipsets are (which is what I said).

Single-mode Bluetooth Smart devices are not backwards compatible. Dual-mode chipsets are (which is what I said).

Ah fair enough...tho why on earth would they ever consider putting single mode in it...they'd obviously go for dual mode if they did.

Though I do agree BT 4.0 would be sensible...they might even consider it now that have this much funding, they have said they're looking to add features, already have with waterproofing it that was at the $1mil mark so maybe 3.5 or 4 will bring 4.0.

I think somewhere in the comments section I remember reading they had a few reasons why they didn't want to use BT 4.0 quite yet

I didnt realize there were so many other golfers in neowin.

Anyone ever play @ Pebble ?

I used to be an Assistant Pro @ my parent's country club so we would do trade outs with all of the other golf courses around here - I have played Colonial, TPC Byron Nelson, Dallas National, Vacqero to name a few local courses - but Pebble Beach was one of those courses where the PGA rate was exactly the same as what everyone else paid : ALOT.

Dallas Nat'l & Vacquero are amazing FYI

I didnt realize there were so many other golfers in neowin.

Who else has mentioned golf?...

I think somewhere in the comments section I remember reading they had a few reasons why they didn't want to use BT 4.0 quite yet

My only guess would be data rates...BLE has a lower data rate ~200 kbit/s compared with 2.1's 1-3 Mbit/s..and unless your gonna use the BLE part of 4.0 there isn't a point in putting 4.0 in there.

Sources:

http://en.wikipedia....ooth_low_energy

http://en.wikipedia.org/wiki/Bluetooth#Bluetooth_v4.0

nvm I wasnt paying attention :facepalm: :blush:

The watch can be used as a gold range finder though...I figured that's what you were on about...just no1 else had mentioned it.
We're working with Freecaddie to create a great golf rangefinder app for Pebble that works on over 25,000 courses world-wide. Instead of using your phone, view your current distance to the green right on your wrist.

source: http://www.kickstarter.com/projects/597507018/pebble-e-paper-watch-for-iphone-and-android

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • You do you, I've just said that it first appeared in "home" version before it will be available in "work" one. I use Edge only because it still supports MV2 uBO extension even on Android - I'll switch when they stop.
    • I imagine that was a review or something? My reviews mostly contain a lot of images and galleries, but these are all webp too, but yeah it all adds up on the page load. Would help if you were more helpful with your critique instead of bitching and moaning like a Karen 😂 Because then we might be able to fix it for you.
    • If Valve refused to let them make the case, I wonder if they've already partnered with someone else to do it? The fact that they didn't seek permission/licence before diving straight in is incredible though
    • OpenClaw now has native mobile apps on iOS and Android by Karthik Mudaliar OpenClaw, the viral open-source personal AI agent, now has its own mobile app, available on both Android and iOS. Users can pair the app with an existing OpenClaw gateway and can start using new mobile-native features that are now available on the app. The app supports all the existing features you'd already have seen on OpenClaw's TUI, as well as some more, such as real-time and background Talk mode, action approvals, sharing from iOS, and optional access to device capabilities such as camera, screen, location, photos, contacts, calendar, and reminders. These features are available on both the Android and iOS versions of the app. What's important with these apps is that they don't run OpenClaw on your phone, but are actually just companion apps that require a running OpenClaw Gateway on an existing device, on macOS, Linux, or Windows via WSL2. To pair the app with your existing OpenClaw gateway, users need to run the command "/pair qr" on the TUI or existing chat interface, which brings up a QR code. Users can then scan this QR code to pair it up with the mobile app. There's also an option to manually pair the app by entering the host and a port. Previously, OpenClaw had been available on phones via WhatsApp, Telegram, Slack, Discord, Microsoft Teams, Matrix, and others. Now, with a native mobile app, the interface is much cleaner and more focused on just the OpenClaw, of course, with the added support for camera, screen, location, and more. It's important to note that OpenClaw comes with its own security warnings. There's always a chance of prompt injection with these tools, so users are recommended to double-check authentication, tool policy, sandboxing, and execution approvals rather than prompts alone. For users well-versed with the AI harness, a native mobile app makes it easier to approve an automation, share a link, use voice, or let an agent react to phone-side context.
  • Recent Achievements

    • First Post
      rosiecharles earned a badge
      First Post
    • Reacting Well
      Juan Dela earned a badge
      Reacting Well
    • Week One Done
      Collagen Project earned a badge
      Week One Done
    • Reacting Well
      Wakeen1966 earned a badge
      Reacting Well
    • Rookie
      Almohandis went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      515
    2. 2
      +Edouard
      273
    3. 3
      PsYcHoKiLLa
      143
    4. 4
      Steven P.
      100
    5. 5
      macoman
      54
  • Tell a friend

    Love Neowin? Tell a friend!