Western Digital launches new Red branded Hard Disks


Recommended Posts

ttnVm.png

Western Digital has announced a new series of Hard Disks which join its current range of Green, Blue and Black Hard Disks. The new Red series are designed for Network Attached Storage appliances, Small Business Servers and Home Servers.

The new drives take the same energy considerations of the green series and combine that with enterprise level anti-vibration technology and time-limited error recovery (TLER) of the Black series.

These features make it the perfect citizen in any small to medium sized storage configuration. The TLER feature is especially important when the disk is used within a RAID Array as it allows the RAID Controller to handle disk-halting read errors which could otherwise cause the disk to stop communicating with the RAID controller resulting in array degradation and/or data loss.

The new Red series will arrive in three configurations, 1TB ($109), 2TB ($139) and 3TB ($189). All three disks feature 64MB of Cache and SATA 6Gb/s Interfaces.

Perhaps the most impressive part of these disks is their power consumption. All three drives are rated at no more than 4.6Watts during Read/Write operations and 0.6-Watt power consumption when in standby or sleep mode.

Read more @ Western Digital's Red Page

Original News Piece written by Vice

  • Like 1

PcPer has a detailled review of the drives here:

http://pcper.com/rev...ive-Full-Review

I so want to get these drives for my home server!

Thanks for posting that review & me too! - I think I'll probably end up buying a few of the 3TB models for my server.

Can someone explain to me what the difference would be in using this drive for a RAID arrange and using a "normal" 1TB oem drive?

If you read the article I wrote at the top it clearly explains that lol

To quote myself:

The TLER feature is especially important when the disk is used within a RAID Array as it allows the RAID Controller to handle disk-halting read errors which could otherwise cause the disk to stop communicating with the RAID controller resulting in array degradation and/or data loss.

Normal drives such as the Eco Green series by Western Digital do not support TLER and are not recommended for RAID use.

A "normal" drive can be many things, ranging from very suspect (Acer) to something quite solid (samsung).

This HDD, over a standard drive, will be more power efficient, more resistant to vibrations, and offer TLER (great, if you are actually running a raid... a non-issue otherwise). I think performance will be much of the same...but who really needs 100+ MBps from a network drive?

For an 'always on' solution, I think they're great - the good points of the Green AND improved life/durability! I wouldn't say go out and swap all your storage drives for these...but there is no reason to buy anything instead of these.

EDIT: If a raid gets stuck waiting on a member disk, it could all fall appart - but who really runs RAID-0 for a storage solution? If a member disk goes offline in any proper storage raid (1, 5, etc) then you reset the computer and it'll come back online if its jammed on a request)

yeah I got that from the OP :p but what would be the result in not using a disk with TLER? crash and burn?

Basically if one of the disks is unable to read something that the RAID controller has told it to, it can spend an exorbitant amount of time trying to locate that data. Hyperthetically lets say it spent 30-40 seconds trying to locate a 4KB sector. During this time the disk is not doing any other read/write for the RAID controller and its queue length is getting larger. The longer this goes on without the Hard Disk giving up and telling the RAID controller it simply can't find the data the higher the chance the RAID controller will think the Hard Disk has completely failed and drop it out of the array completely.

This is bad for a number of reasons. If you're using RAID0 you just lost all your data. If you're using RAID5 you just made your array vulnerable to a lengthy rebuild process which could cause another disk in your array to fail and then you've lost all your data.

Basically if one of the disks is unable to read something that the RAID controller has told it to, it can spend an exorbitant amount of time trying to locate that data. Hyperthetically lets say it spent 30-40 seconds trying to locate a 4KB sector. During this time the disk is not doing any other read/write for the RAID controller and its queue length is getting larger. The longer this goes on without the Hard Disk giving up and telling the RAID controller it simply can't find the data the higher the chance the RAID controller will think the Hard Disk has completely failed and drop it out of the array completely.

This is bad for a number of reasons. If you're using RAID0 you just lost all your data. If you're using RAID5 you just made your array vulnerable to a lengthy rebuild process which could cause another disk in your array to fail and then you've lost all your data.

Interesting! Thanks

I'm asking because in the next couple of months i'm thinking of upgrading my 6 yeard old build and was thinking of more reliable solutions than just plugging in an external hard drive for back up and I don't know much about RAID and what types of HDD's to use and whatnot, anyhow, thanks :)

Depending on the size of your storage, simply plugging in an extra hdd(internal or external) is a great and simple way to go about backups =) RAIDs are complex beasts, and are prone to going wonky (other people will tell you otherwise =P). For a simple storage solution you very rarely need the performance improvement that RAID1 offers.

If you have 8TB of storage, duplicating this volume is expensive...so going for something like RAID5 would be your best, albeit complex, bet.

Depending on the size of your storage, simply plugging in an extra hdd(internal or external) is a great and simple way to go about backups =) RAIDs are complex beasts, and are prone to going wonky (other people will tell you otherwise =P). For a simple storage solution you very rarely need the performance improvement that RAID1 offers.

If you have 8TB of storage, duplicating this volume is expensive...so going for something like RAID5 would be your best, albeit complex, bet.

naw I barely have around 300gb or more of photos and music, the thing is, I've already had an external WD fail, I sent it back for RMA ( still under warranty) Luckily I had the in computer back up, but it was that disk failure that got me thinkin, i've got 10+ years of photos in my PC that are worth saving and not losing. Yeah I keep reading RAID is too much of a hassle for backup, I really don't care about performance but, just being safe, anyho, no more thread hijacking :p

So I guess with the launching of new products ... factories in Asia must be caught up with production and now they can lower prices .... :crazy:

BLASPHEMY!!!

NEVER! :o

Glassed Silver:mac

i wonder if it will be handicapped like a green drive ?

also can't the tLR tool be used ? (WDTLER)

i know the Wdidle.exe tool worked great for my Green drive.

I used it as soon as i took it out of the static bag to improve head parking

i'm suspicious when they claim low power consumption.. there must be a reason for that ;)

[...]

i'm suspicious when they claim low power consumption.. there must be a reason for that ;)

Probably it's got to do with higher data density = less rpm needed for the same speed.

Glassed Silver:mac

Haha damn! I just got 2 Greens -.- Then again, being in Australia, we probably wont be able to get our mits on these for a few years yet =P

They're already available at a lot of Aussie computer stores - PCCaseGear and CentreCom just to name a couple ;)

i wonder if it will be handicapped like a green drive ?

also can't the tLR tool be used ? (WDTLER)

i know the Wdidle.exe tool worked great for my Green drive.

I used it as soon as i took it out of the static bag to improve head parking

i'm suspicious when they claim low power consumption.. there must be a reason for that ;)

In their newer green drives the TLER tool doesn't work. They have gone out of their way to cripple their own products so that they don't compete with their other products.

In their newer green drives the TLER tool doesn't work. They have gone out of their way to cripple their own products so that they don't compete with their other products.

Indeed, I was lucky enough to get four green drives before this policy was implemented, one failed, got a replacement under warranty but it wouldn't allow me to change the TLER :(

PcPer has a detailled review of the drives here:

http://pcper.com/rev...ive-Full-Review

I so want to get these drives for my home server!

Meh. You don't need TLER/RED/BLACK/ENTERPRISE drives for a home server. I'm using 8 Samsung HD204UI 2TB drives with a dell PERC 6/I controller in a case at home. The box has been going for over a year and a half 24x7, only going down for windows updates, or cleaning dust out. I have not had one single problem with any of the drives yet. These are commercial "Green" samsung 5400 RPM drives, and I got them for 69$ each. RAID5 reads/Writes 500MB/sec +, 0 errors, serving as a Web/Exchange/Hyper-V/fileserver/torrent box

This is overkill.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • The fact that memory in general is so high I have to take a loan out to build a computer now is just beyond stupid. Who's really to blame here? Low supply or high demand?
    • Display Driver Uninstaller (DDU) 18.1.5.5 by Razvan Serea Display Driver Uninstaller (DDU) is a utility for completely removing AMD/NVIDIA/INTEL graphics drivers and related packages from your system, attempting to eliminate all leftovers (including registry entries, folders and files, driver store). Though AMD/NVIDIA/INTEL drivers can usually be removed via the Windows Control Panel, this uninstaller tool was created for situations where standard uninstall fails, or when you need to fully remove NVIDIA or ATI graphics card drivers. After using this driver cleaner, your system will behave as though it’s the first time you’re installing a new driver—similar to a fresh Windows installation. As with all such tools, we recommend creating a restore point beforehand, allowing you to undo changes if issues arise. If you're having trouble installing an older or newer driver, try it—there are reports that it resolves such problems. Recommended usage: The tool can be used in Normal mode but for absolute stability when using DDU, Safemode is always the best. Make a backup or a system restore (but it should normally be pretty safe). It is best to exclude the DDU folder completely from any security software to avoid issues. You do NOT need to uninstall the driver prior using DDU. Requirements: .NET Framework 4.8 Compatible with Windows 7, 8, 8.1, 10, and 11 (32-bit or 64-bit) Note: Using on Insider Preview builds is at your own risk. Display Driver Uninstaller (DDU) 18.1.5.5 changelog: Added 'Reset to recommended' button for the Options. General fixes and improvements. Download: Display Driver Uninstaller (DDU) 18.1.5.5 | 1.7 MB (Freeware) Download: DDU Portable | 1.2 MB Links: Display Driver Uninstaller Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • WACUP 1.99.51.24568 Preview by Razvan Serea WACUP (WinAmp Community Update Project) is a modern, enhanced version of the classic Winamp music player, designed for better stability, performance, and compatibility. Built for Windows, WACUP retains the familiar Winamp interface while adding 64-bit support, bug fixes, and new features like improved audio format support, customizable skins, and optimized playlist management. Unlike bloated alternatives, WACUP focuses on lightweight performance and regular updates, making it the best choice for fans of the classic Winamp experience. Basically, if you miss the good old days of Winamp and want a modern upgrade that doesn’t mess things up, WACUP is for you! WACUP key features: Classic Winamp Feel – Keeps the familiar interface and functionality. Bug Fixes & Stability – Fixes old Winamp issues and improves performance. 64-Bit Support – Works better on modern systems. More Formats & Plugins – Supports additional audio formats and third-party plugins. Customizable UI – Skins and tweaks for a personalized look. Better Library Management – Improved playlists, media organization, and search. No Bloat – Focuses on performance without unnecessary extras. Regular Updates – Community-driven development with new features and fixes. WACUP 1.99.51.24568 Preview changelog: Fixed a deadlock seen from the recent crash reports when doing some of the drag + drop actions within the media library window Fixed a loading crash seen related to a problem with some of the artwork cache image files being restored which should now be better handled allowing for the bad image to be removed without it failing Fixed a deadlock seen from the recent crash reports when the internal metadata cache clearing is triggered which could block the main ui thread for too long with this now being moved to a background thread Fixed some performance issues with some of the methods related to determining artwork support which mainly affected the local library import / refresh (this is still slower for some compared to other players because there's more data & artwork aspects being checked for which means doing more processing on a single file despite the best of attempts to reduce duplicate / heavy processing where possible) Fixed a crash with the JTFE based missing files hotkey which no one seems to have used for an age for this to appear (maybe it's time to seriously consider stripping out features that aren't being used) Fixed how some of the file types which use extra information to reference their sub-songs is handled which was preventing some from being correctly resolved back to their base file (noticed fixing above) Fixed an issue with the handling of files with underscores in their filepath which wasn't being correctly handled causing some of the filename to be lost when shown as the title if title reading is delayed Fixed a few things that might be behind NotSoDirect not being stable for some setups though am still not certain that the changes done for this are going to fully resolve the problem from the crash reports Fixed the OS toast handling when there's no prior shortcut in the OS start menu to now create the shortcut (needed to allow the yes/no buttons for the new build / post-release toast) to be done as a hidden one so it's less likely to cause annoyance for those not wanting to see it whilst still allowing this less than ideal OS api implementation requirement to be met to avoid toasts without the needed buttons Fixed a regression when moving from taglib1 to taglib2 which broke some of the handling in place to allow for external programs to still access files when wacup has a held open cached instance of the file Everything else Updated cppwinrt (gen_win10shell.dll) to 3.0.260520.1 (26 May 2026) Updated libcurl (libcurl.dll) to 8.2.1 (24 Jun 2026) Updated Monkey's Audio (in_ape.dll) to 13.15 (28 Jun 2026) Updated mpg123 (mpg123.dll) to 1.33.6 (6 Jun 2026) Updated OpenSSL (libcurl.dll) to 3.5.7 (9 Jun 2026) Updated pugixml to 1.16 (16 Jun 2026) Updated taglib (tag2.dll) to 2.3.0 (11 May 2026) Updated vgmstream (in_vgmstream.dll) to the latest Git commit from 28 Jun 2026 Download: WACUP 64-bit | 9.6 MB (Freeware) Download: WACUP 32-bit View: WACUP Website | Screenshots Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • "over a thousand engineering hours" and started selling it but could not take a couple of minuets to send an AI email to ask permission. What an expensive lesson.
    • just tested it yesterday, a simple page with autoloading ADS takes 60mb....just 1 page for 60 megabytes.   poor people with a limited internet never will visit neolose
  • Recent Achievements

    • Week One Done
      Collagen Project earned a badge
      Week One Done
    • Reacting Well
      Wakeen1966 earned a badge
      Reacting Well
    • Rookie
      Almohandis went up a rank
      Rookie
    • Apprentice
      jahara21 went up a rank
      Apprentice
    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
  • Popular Contributors

    1. 1
      +primortal
      526
    2. 2
      +Edouard
      265
    3. 3
      PsYcHoKiLLa
      146
    4. 4
      Steven P.
      99
    5. 5
      macoman
      55
  • Tell a friend

    Love Neowin? Tell a friend!