Recommended Posts

This Tomato sounds interesting, but my DD-WRT router has been so rock solid I don't want to mess with it, really.

One question about Tomato:

Are there options to force particular connections (by MAC address preferably) to ONLY use OpenDNS for DNS look ups? I like how with DD-WRT I can force a few connections on OpenDNS (like the DirecTV and XBox as well as the kid's iPods and stuff) while the others default to my ISPs. I have to add entries to iptables in dd-wrt to get this functionality and would like a user friendly approach.

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/page/2/#findComment-595057719
Share on other sites

  • 2 weeks later...

Ran DD-WRT for a months but QOS is quite buggy on my dir300, guess you have to pay? to get decent QOS so went to Gargoyle(OpenWRT) and everything is great except for a slower boot time but it got the best QOS out there and Active Congestion Control is an online gamer's best friend.

Another I have noticed is DD-WRT rude mods which turned me off.

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/page/2/#findComment-595084717
Share on other sites

none of the alt. fw supports my WGR614..... might upgrade soon for USB print sharing.... so sick of people having to have me mess with networking crap everytime they wanna print cuz for some reason it screws up all the time. PRINTERS ARE EVIL!!!!

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/page/2/#findComment-595084731
Share on other sites

I have a Linksys WRT54G2 which only DD-WRT seems to support, so guess whats on it

Its currently being used as a wireless bridge (or wireless extender if you like - so easy to set up its not funny), its insanely stable regards data transfer and i havent rebooted it, or even looked physically at it since it was installed 6 months ago. Also dont understand why people whine about the GUI, straight forward if you know what youre doing. Ive seen worse on a Netgear :)

To be honest i havent, nor do i think i will, looked at updating the firmware, it just works, why fix something that aint broken

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/page/2/#findComment-595085437
Share on other sites

Note to self: You like DD-WRT and DD-WRT likes you, DO NOT flash alternate firmware ever again.

--

That took far too long to remember the TFTP commands to unbrick

For future reference (when I brick it next time)

PuTTY > update code.bin > command prompt > tftp -i 192.168.1.1 put code.bin

That's why I don't try these. I'm not comfortable enough- same thing with ROMs for my phones. Hope you're back in business with that router.

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/page/2/#findComment-595086321
Share on other sites

Ran DD-WRT for a months but QOS is quite buggy on my dir300, guess you have to pay? to get decent QOS so went to Gargoyle(OpenWRT) and everything is great except for a slower boot time but it got the best QOS out there and Active Congestion Control is an online gamer's best friend.

Another I have noticed is DD-WRT rude mods which turned me off.

Talking about the good QoS I thought this was a quality firmware I could try on my WRT610v1 that doesn't support TomatoUSB. Then I went to their site, and looked at some screenshots, and realized they even managed to make the DD-WRT interface look good, and they're QoS is just a poor mans copy of Tomato, and since I use my main WRT610v2 with tomato as the actual internet router I don't need to put this crap on it for the QoS.

why would you voluntarily put that thing on a router....

Still looking for a good replacement for DD-WRT then, since this router randomly seizes all communication with everything for a few seconds when playing TSW, and at some other times.

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/page/2/#findComment-595086557
Share on other sites

That's why I don't try these. I'm not comfortable enough- same thing with ROMs for my phones. Hope you're back in business with that router.

Yea I was back in business with it before I posted that method, I knew I could unbrick it because it used to be a locked down samknows router and I had to unlock it the same way originally

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/page/2/#findComment-595086689
Share on other sites

  • 4 months later...

And when you use pfSense you'll never go back to home routers running custom firmware. :p

hmm a nice little Linksys WRT610 on my kitchen wall that barely uses any power and does everything I need at full speed allows me full control of the network. or a big computer box with either a rear antenna that gets blocked by the case or a big antenna mounted higher on the wall with a wire, oh and I also need an extra switch for the wired equipment.

yeah, why wouldn't I want the pfsense solution...

IOS > DDWRT, Look at Cisco's end of life Aironet access points and routers which are now in the $200 price range online.

Still light-years ahead of consumer crap

And I'd still take a nice home router on my kitchen wall running Tomato over that.

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/page/2/#findComment-595426334
Share on other sites

hmm a nice little Linksys WRT610 on my kitchen wall that barely uses any power and does everything I need at full speed allows me full control of the network. or a big computer box with either a rear antenna that gets blocked by the case or a big antenna mounted higher on the wall with a wire, oh and I also need an extra switch for the wired equipment.

yeah, why wouldn't I want the pfsense solution...

If your hole network is based around crappy Wi-Fi speeds, then yes, pfSense is not for you.

You also complain about having an antenna on the wall with a wire, but insist on mounting a router on your kitchen wall...

and I'm pretty sure my little AMD E350 doesn't use that much power.

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/page/2/#findComment-595426412
Share on other sites

Hmm.. that was weird, I believe I specifically mentioned my wired network as well.. you know like the wire that goes from the router to my media bench, where I have my HTPC/Server, networked BD/surround receiver, networked satellite tuner, Xbox 360, and a TV and WiiU connected over wireless. Then I have another wire going upstairs to my second WRT 610 (got it free) that's used as an upstairs Access point, and a switch for the computers and devices on the second floor office/computer room.

All this with a nice anonymous looking 610 on my kitchen wall right above the ADSL modem.

As opposed to the PFsense alternative which would be Modem+big ugly computer box on the floor+ wired antenna on the wall.

to give me the same performance as my 2.4Ghz and 5Ghz 610 I would in fact need two wireless cards and two antennas on the wall. and then I wouldn't get the range and performance of the excellent Linksys MIMO antennas.

Also, as for Crappy WiFi speeds. well I have an two N networks on both 5 and 2.4 Ghz, and this copies as fast as the HDD's in the computers can handle anyways for internal network speed, as for internet speeds, the N network is faster in any case.

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/page/2/#findComment-595426438
Share on other sites

I guess you're right and I'm wrong. (can't be arsed to argue with you over the Internet to be fair)

DD-WRT > pfSense... after all, it's the size that counts. Who wants a HUGE big ugly ITX box standing on the floor.

And for the record, I'm not a mind reader... but thanks for sharing with us your network as a hole.

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/page/2/#findComment-595426464
Share on other sites

"big ugly computer box on the floor"

What?? Who says your router has to be "next" to the modem? And who says it has to be big? Here is a case for 3 nic alix board, its 6.5x6x1 inches -- thats smaller than you 610 ;) (2.6 x 12 x 10 inches)

post-14624-0-40599300-1357054629.png

You clearly have some sort of box "I have my HTPC/Server" That box could be a VM host and pfsense could run in a VM - which just a wire from your modem.. Why you would have your modem in the kitchen is beyond me in the first place.

Your "router" could be where ever you want it to be - to say they have to be in the kitchen is crazy talk, or that they have to big big boxes?? I run multiple machines, my NAS and my router (pfsense) and its all on a N40L that is only 10.5" x 8.3" x 10.2" -- which is also smaller than your router ;) Just a bit thicker ;) It has 4 drives in it currently and only uses like 55 watts. Have it plugged into my killawatt so lets see has used in the last 6392 hours, 358Kwh -- what is that 266 days, and I pay about 12.5 cents per kwh so your talking 17 cents a day roughly to run my NAS, my router and all my play VMs - ubuntu, centos, freebsd, w7, 2k8, w8, etc. etc..

Your router might be able to do everything you want it to do - but sorry its not up to what I like to do on my network. The gateway/firewall between your network and the public internet has little to do with a wireless network. That you want to combine them into one simple little box with few actual networking features -- happy for you. But if looking for wireless coverage and speed - then that hangs off your wired network as AP, not also providing gateway/firewall/nat functions, etc.. Their little cpu/memory not really up to much of anything really.

But sorry it does not have to be a big box, nor does it have to be a power hungry box, nor does it have to sit next to where your modem is -- in your case the kitchen.

BTW - this thread is from jul/aug 2012 ;)

Link to comment
https://www.neowin.net/forum/topic/1094439-dd-wrt/page/2/#findComment-595426514
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • If you have a TV in your living room, chances are you can probably just use the Steam Link app and play your huge PC in big picture mode, effectively giving you the Steam Machine experience to see if you'd actually like it. The good news is the Steam Machine can have it's drives upgraded. It has a USB-C 10Gbs port as well, so the 512GB drive could be quickly moved to an external enclosure and repurposed.
    • This machine could very well be a second gaming PC for their living room as a console experience. So we would have to assume their main PC exists as well; With that said, I have 10gb home network with a 2.5gigabit internet connection here so we tend to have more than enough speed to download games. However, we can't make use of the 10gb LAN using Steam's built in transfer tool because it always compresses transfers and that slows the transfer down to well below a standard gigabit port speeds, sometimes as slow as 200-300Mb/s transfers. While that's probably still faster than most internet connections anyway, if they'd fix the LAN transfer issue it'd be upto x5 faster even on a gigabit LAN, than simply dropping a 2.5gbe port on there with hopes of a few people having fast internet connections. There are solutions, work arounds, like using LANCache if you run a NAS... or simply copying the files over manually using a network share.
    • Samsung announces ultra-fast UFS 5.0 storage to supercharge mobile AI by Paul Hill Local AI models tend to run a lot more slowly than cloud services like Claude and Gemini; however, Samsung has just announced that it has developed its UFS 5.0 solution, which increases data transfer to speeds of 10.8GB/s, enabling faster storage and processing in mobile memory that has the potential to provide more optimal local AI experiences. Commenting on this development, Jangseok Choi, head of Memory Product Planning at Samsung Electronics, said: If you’ve tried local AI, you’ll know it can be quite slow, especially if using the larger parameter models. By developing this new solution, Samsung says that storage is evolving from just storing data to a core piece of infrastructure that supports AI computation, too. The Korean company said that UFS 5.0 integrates the latest embedded memory interface standard from JEDEC and achieves up to 10.8 gigabytes per second (GB/s) transfer speeds. Regarding write speeds, Samsung UFS 5.0 can reach 9.5 GB/s. Both the read and write speeds are twice as fast as those of the previous UFS 4.1 standard. Aside from being ideal for local AI, Samsung’s UFS 5.0 is more power efficient by 40% compared to UFS 4.1. Samsung achieved this by implementing innovations such as clock gating and multi-voltage technologies. UFS 5.0 is also ultra-compact at just 7.5mm x 13mm x 0.9mm; that is 16.7% smaller than UFS 4.1. The company said it will be bringing it to multiple devices in the future, including mobile, wearable, and extended reality.
    • A bit like the steamdeck, this probably isn't for you.
    • Gamers Nexus already did their review, and building your own will be faster and cheaper, so not very convincing.
  • Recent Achievements

    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
    • Dedicated
      tuben earned a badge
      Dedicated
    • Week One Done
      mnsgroup earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      496
    2. 2
      +Edouard
      209
    3. 3
      PsYcHoKiLLa
      99
    4. 4
      Michael Scrip
      86
    5. 5
      neufuse
      69
  • Tell a friend

    Love Neowin? Tell a friend!