Recommended Posts

Seems no one either noticed or just hasn't been posted yet.

But the main site has a few little bugs that can be quite frustrating.

It used to work properly, but since a while there are 2 major things I've noticed.

pressing reply wont open up the reply box below the comment, but at the entire bottom.

pressing like will take you to the front-page.

Both these issues are not on IE10. Just IE9.

Running Windows 7 starter 32bit.

  • Like 1
Link to comment
https://www.neowin.net/forum/topic/1110037-ie9-issues/
Share on other sites

Can someone else with ie9 please test this? Would be appreciated :)

I just tested this in Windows 7 Ultimate 64 bit with the same results.

There are tons of bugs on the site. Here are some to bring to your attention:

1. If I open the notifications menu in a new tab all it gives me is a blank white page. This is only a problem if you do it on the main page.

2. I recently changed my name and the name tag you can put in your sig (Like you have) did not change to represent my current user name. I contacted Neobond and David Legg several times but the issue has not been resolved. Many people have the same problem.

3. On the "more" tab, if you click on it it opens in a new window and list the options that are in the drop down menu. (Is it meant to do that?)

4. SLOW the last few days. It takes 30 seconds to like or submit a post.

Link to comment
https://www.neowin.net/forum/topic/1110037-ie9-issues/#findComment-595225669
Share on other sites

[removed quote]

and why should they stop using IE if it's what suits them best?

OP: strange, but I'm not experiencing those problems on my end.

NVM. Damn it, I tested it on IE10. :p

Yeah no issues on IE10 either for some odd reason.

I just tested this in Windows 7 Ultimate 64 bit with the same results.

There are tons of bugs on the site. Here are some to bring to your attention:

1. If I open the notifications menu in a new tab all it gives me is a blank white page. This is only a problem if you do it on the main page.

2. I recently changed my name and the name tag you can put in your sig (Like you have) did not change to represent my current user name. I contacted Neobond and David Legg several times but the issue has not been resolved. Many people have the same problem.

3. On the "more" tab, if you click on it it opens in a new window and list the options that are in the drop down menu. (Is it meant to do that?)

4. SLOW the last few days. It takes 30 seconds to like or submit a post.

Not sure about some of the bugs you listed, I barely use IE9 except when traveling and then I dont go any further then the frontpage usually. But most of the issues I've noticed around the site, werent there a while ago.

However I'll try and play with IE10 dev tools later

Edited by Denis W
  • Like 1
Link to comment
https://www.neowin.net/forum/topic/1110037-ie9-issues/#findComment-595226707
Share on other sites

[removed quote]

As for IE9 issues and neowin, I still have the posting problem, I just copy refresh page and then re-post by using contrp+v and then hit post works now 98 out of 100 times.

Edited by Denis W
  • Like 1
Link to comment
https://www.neowin.net/forum/topic/1110037-ie9-issues/#findComment-595226747
Share on other sites

Seems no one either noticed or just hasn't been posted yet.

But the main site has a few little bugs that can be quite frustrating.

It used to work properly, but since a while there are 2 major things I've noticed.

pressing reply wont open up the reply box below the comment, but at the entire bottom.

pressing like will take you to the front-page.

Both these issues are not on IE10. Just IE9.

Running Windows 7 starter 32bit.

I can not reproduce these problems. They seem javascript related. Did you clear cache?

Link to comment
https://www.neowin.net/forum/topic/1110037-ie9-issues/#findComment-595226825
Share on other sites

Yes, stay on topic or will have to get a moderator to start slapping people.

Will quote myself again from earlier in the thread, so we can get this issue the original poster asked about...... fixed.

Can someone else with ie9 please test this? Would be appreciated :)

Link to comment
https://www.neowin.net/forum/topic/1110037-ie9-issues/#findComment-595226977
Share on other sites

Yes, stay on topic or will have to get a moderator to start slapping people.

Will quote myself again from earlier in the thread, so we can get this issue the original poster asked about...... fixed.

https://www.neowin.net/forum/topic/1110037-ie9-issues/page__view__findpost__p__595226825

Link to comment
https://www.neowin.net/forum/topic/1110037-ie9-issues/#findComment-595226999
Share on other sites

Couldn't replicate that in my VM, could it be graphics driver related?

IE10 metro doesn't show those kinda glitches to me either.

I can not reproduce these problems. They seem javascript related. Did you clear cache?

Yes I have. Even tried with dev tools. Seems like since today I've been having the exact same issues on IE10, which is my desktop, haven't visited neowin much on my home desktop for the last few days though, so might been a bit longer and go by unnoticed.. Entirely different machine.

Reply refreshes the page, takes me to the bottom of the entire comments section.

Liking a comment will take me to the index of the front-page.

Switching in dev tools to IE9, IE8 or IE7 doesn't seem to help much. Same issues

Been having issues on the following:

IE10desktop Win8 pro RTM 64.

IE10desktop Win RP 64.

IE9 Win7 SP1 32bit.

However on IE10Metro win8 pro RTM 64. Reply works fine, liking does too.

Weird.

Link to comment
https://www.neowin.net/forum/topic/1110037-ie9-issues/#findComment-595229641
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • OpenClaw now has native mobile apps on iOS and Android by Karthik Mudaliar OpenClaw, the viral open-source personal AI agent, now has its own mobile app, available on both Android and iOS. Users can pair the app with an existing OpenClaw gateway and can start using new mobile-native features that are now available on the app. The app supports all the existing features you'd already have seen on OpenClaw's TUI, as well as some more, such as real-time and background Talk mode, action approvals, sharing from iOS, and optional access to device capabilities such as camera, screen, location, photos, contacts, calendar, and reminders. These features are available on both the Android and iOS versions of the app. What's important with these apps is that they don't run OpenClaw on your phone, but are actually just companion apps that require a running OpenClaw Gateway on an existing device, on macOS, Linux, or Windows via WSL2. To pair the app with your existing OpenClaw gateway, users need to run the command "/pair qr" on the TUI or existing chat interface, which brings up a QR code. Users can then scan this QR code to pair it up with the mobile app. There's also an option to manually pair the app by entering the host and a port. Previously, OpenClaw had been available on phones via WhatsApp, Telegram, Slack, Discord, Microsoft Teams, Matrix, and others. Now, with a native mobile app, the interface is much cleaner and more focused on just the OpenClaw, of course, with the added support for camera, screen, location, and more. It's important to note that OpenClaw comes with its own security warnings. There's always a chance of prompt injection with these tools, so users are recommended to double-check authentication, tool policy, sandboxing, and execution approvals rather than prompts alone. For users well-versed with the AI harness, a native mobile app makes it easier to approve an automation, share a link, use voice, or let an agent react to phone-side context.
    • Google pitches Spanner as one database for all AI agents with these new featues by Karthik Mudaliar Google Cloud is introducing new features within Spanner, its distributed database, as a place where enterprises should keep their data, using which AI agents could make smarter and better decisions. In a detailed blog post, Google highlighted quite a few features coming to Spanner, including relational data, graph relationships, vector search, key-value access, full-text search, and operational analytics together in one database architecture. Google says that today's systems aren't well-made for AI agents. There could be data that is present in one system, search indexes in another, embeddings in a vector database, and relationship data in a graph database. This fragmentation isn't great for AI agents to do their jobs because they don't have access to all of this data in one place. This is where Google is positioning Spanner as a solution. Spanner is already a globally distributed relational database with strong consistency, and Google wants its customers to see it as a broader data layer for AI applications. The company introduced something called Spanner Graph, along with integrated vector search, full-text search, a Cassandra-compatible key-value endpoint, and a columnar engine for analytical queries on operational data. Google also added that its ScaNN-powered vector search can support indexes with more than 10 billion vectors, while the columnar engine can make some analytical scans up to 200 times faster. All of this isn't just exclusive to the Google Cloud Platform, and there's support for multi-cloud as well. This comes via Spanner Omni, which Google says is a downloadable, containerized version of Spanner that can run on Kubernetes and in environments outside Google Cloud, including Microsoft Azure and AWS, and even on-premises infrastructure as well as edge deployments. Google says that customers who are interested in the full-featured edition should contact the company, and there's no word on commercial availability or separate pricing. Those interested can read the full blog by Google Cloud, which details these features individually.
    • Kalmuri 4.2.5 by Razvan Serea Kalmuri is your all-in-one, portable screen capture and recording solution designed for speed, simplicity, and flexibility. Whether you need a full-screen snapshot, a custom area, a scrolling webpage, or smooth video recording, Kalmuri delivers with ease. Capture text instantly from images with built-in OCR, keep floating images on top for quick reference, and use the precise color picker for perfect design matching. Customize hotkeys to work your way and share results instantly with built-in upload options. Kalmuri runs without installation, making it ideal for USB use, and offers an intuitive interface that’s easy to learn. Kalmuri key features: Video recording support (designation of whole screen and area) Whole screen, active program, window control, area application Extract text from images using optical character recognition (OCR). Support for PNG, JPG, WEBP, BMP, GIF file formats MP4 video recording powered by FFmpeg for high-quality results Full web page capture Share the captured image on the web Color extraction function Printer output Hotkey settings Adjustable via keyboard for area capture (Arrow key, Ctrl+Arrow key, Shift+Arrow key) File name format (sequential, datetime) Free to use it at work, at home, in government offices, at school, etc. Using Kalmuri portable for video recording Kalmuri’s portable version doesn’t include FFmpeg, which is required for video recording. Without it, you’ll get an “error FFmpeg.exe not found” message. To fix this, download FFmpeg from the provided link, extract it, and place FFmpeg.exe in Kalmuri’s folder. Kalmuri will then recognize it automatically, allowing you to start recording in high quality instantly. Kalmuri 4.2.5 changelog: Fixed an intermittent crash when using Area Capture Improved stability for Area Capture and screen recording Resolved a capture issue that could occur right after startup Download: Kalmuri 4.2.5 | 24.2 MB (Freeware) Download: Kalmuri Portable 4.2.5 | 2.1 MB View: Kalmuri Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • First Post
      rosiecharles earned a badge
      First Post
    • Reacting Well
      Juan Dela earned a badge
      Reacting Well
    • Week One Done
      Collagen Project earned a badge
      Week One Done
    • Reacting Well
      Wakeen1966 earned a badge
      Reacting Well
    • Rookie
      Almohandis went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      516
    2. 2
      +Edouard
      273
    3. 3
      PsYcHoKiLLa
      143
    4. 4
      Steven P.
      98
    5. 5
      macoman
      54
  • Tell a friend

    Love Neowin? Tell a friend!