Windows 7 Restore CDs - Question 1 of 3


Recommended Posts

Good morning.

I come here because I know many of you are experienced enough and would have the correct information I need. I have three questions I am hoping to get help with and I will put each question in it's own thread post.

My first question is about Windows 7 Restore cds. I have a Hewlett-Packard desktop that I bought in February of this year. It came pre-installed with Windows 7 Home Premium and like many retail systems you buy these days it did not come with Restore cds pre-packaged with the computer. I have the option to create Restore cds that will require four dvd's to make.

My question is this - The HP Window used to create the Restore cds says we can only make one set of discs. Why do they only allow us one chance to make a set of Restore cds? What's the reasoning behind it? I live in Arizona and where I live we have a lot of severe electrical storms and many power outages. What happens if I have a power outage in the middle of making my Resore cds, like if I was on disc 2 of 4 and the power went out, or what if I got some sort of computer error? Is that the end of it? No additional chance to try and make them again? Is my only option then to call HP and pay to have a set of discs mailed to me?

I don't understand the "one chance" limitation that's imposed. What's the big deal if I would prefer to make a backup set of discs, or that I want to try again after the first attempt fails?

Thanks in advance for your answers and opinions.

It's just another annoyance of so many laptop manufacturers have been doing for a long time and should be banned from doing so by some kind of law.

There is a way to bypass this limit so that it prompts to create these discs again - you need to delete a system file hpcd.sys on both the recovery partition and your installation.

More robust way (and one I recommend) would be backing up the whole recovery partition to an external hard disk.

As for power going out and such - do invest in a respectable UPS, surge arrestors (preferably with network ports, too) and see to proper wiring in your house. It's quite a chore, definitely seek advice if only to confirm your choices, but might one day save you every single electronic thing you have there.

1) You only get one copy (due to licensing I think). It also doesn't count until it completes a verification pass so if it fails in the middle for any reason, simply start over.

2) You can make as many image based system backups as you like using the built in Windows utility.

Yep, while this is a totally retarded rules, i'd recommend just buying an external hard drive and creating a system image. it's faster to restore from anyway.

I've used Acronis True Image for several years and always back up my OS with a disk image about once a month. I've had to use it numerous times when my OS went belly up or I'd get a BSOD. And like warwaggon said place the disk image on another drive.

I'm not sure if this is allowed (posting links) , but here is a link for Win 7 with SP1 , 32 or 64 . Could come in handy in your situation . Just use the code on your machine to activate . :rolleyes: The built -in windows back-up tool will create an image of your entire hard drive , if you just have a good place to put it . Personally , I use separate usb hard drives for back-ups and imaging . I have never tried using discs .Linky: <snipped>

Edited by John S.
please don't link to full disc images

If you were so inclined, you used to be able to extract the Windows Key and use that to install a clean copy ( Need confirmation ), Not sure if this works on Win7. I also remember hearing something about companies having to send out rescue disks in certain situations, not sure of details. 4 Dvds of basically rubbish will take a while to reinstall too, A Win7 install from image on USB drive takes under 10mins and another 20 tops for essential programmes, then you can let Windows runs its updates.

Also good idea to have regular backups of Bookmarks, Pics, Itunes etc.

Thank you all very much for your replies.

I only have one harddrive on my system and I have no external harddrive. I've been out of work for a very long time, so buying an external device isn't possible for me any time soon. Unfortuneately the built in Windows Backup tool doesn't let me use DVD's it always asked for an external harddrive (if I recall correctly). Come to think of it now, I do have an 8gig USB thumb drive though. I'm not sure if that would be accepted by the Windows Backup tool or not I guess it never occured to me to try it; I suppose I didn't think it would be large enough only being 8gig in capacity.

To +skilithead and MillionVoltss -

You both mention USB drive or USB Harddrive - do you refer specifically to a USB external harddrive or would a USB thumb drive/flash drive be acceptible to?

To +skilithead - thank you very much for that link. I am downloading the Windows 7 Home Premium 64 bit with SP1 as we speak. I read the comments on that page and several people mentioned the files getting corrupted and VG said it was most likely because they had a slow internet connection. Hopefully my download will work when the time comes since I too have a slow connection 1.5mb dsl. I guess I won't know if it works or not until the day comes I attempt this fresh re-install using that ISO from the link you gave me.

I will assume since you gave me that link, you have used those downloads yourself? When VG said to use your product key from the back of the computer that should be the same product key I see on the Microsoft sticker? Or does he mean a CD key from a retail box of a Windows 7 Operating System? Again my computer is a store bought Hewlett-Packard box with Windows 7 Home Premium pre-installed, so all I have is that Microsoft sticker on the back of the computer.

To Dashel - thank you for pointing out that "It also doesn't count until it completes a verification pass". That's reassuring to know that.

and lastly to Gotenks98 - thank you for sharing that fact. It's good to hear that you yourself have reburned the Restore cds multiple times.

Again, thanks to everyone for your replies, I read them all and have bookmarked this page for future reference and I also pressed the "Like" button for your replies.

~Az.mak

Yes sir , I have used them ,32 and 64 ,Home Premium and Pro . I have had no problems . As a matter of fact , I used the Home Premium to set up one of my sisters new HP laptop . Yes the key is on the Microsoft COA sticker that is on either the case (desktop), or the bottom of a laptop . Of course I scan anything I download , but you can never tell what someone else's connections , etc. is like . In my case I was referring to a separate hard drive in a usb enclosure , but flash , or thumbdrives would work , providing you have enough space/drives . A single DVD disc will only hold right at 4GB of data , and may or may not be re-writable . A 4 , 8 , or 16 (larger if you can afford them ) thumb drive will work . I am in the habit of re-partitioning and installing an un-adulterated copy on my machines , and those I work on . Saves time un-installing the OEM junk that they are set on adding to there machines , but that's another story .LOL . Good luck mate !

Microsoft lets users download the image (ISO) for Windows 7 version legally through digital river. Just download the one that the sticker on your PC says such as Premium or Ultimate.

Also it does not matter is you download 32 or 64 bit as you key is also compatible. I would install the vanilla version of windows with a clean format and then manually install the drivers for you hard its very easy and all drivers are on HP's site.

You will be left with a clean install with no bloatware and will never have to use recovery disc again. Windows 7 keys can be used with vanilla ISO of retail Windows 7 but this was not possible with XP but was relaxed with Vista and 7.

You will now never have to use that horrid tool again. Do a google search for the "digital river windows 7 iso" and it will come right up.

P.S. Also in the future if you buy a new PC this is also what you should do "DAY ONE", PC manufactures are the main reason people PC's run like crap.

If you were so inclined, you used to be able to extract the Windows Key and use that to install a clean copy ( Need confirmation ), Not sure if this works on Win7. I also remember hearing something about companies having to send out rescue disks in certain situations, not sure of details. 4 Dvds of basically rubbish will take a while to reinstall too, A Win7 install from image on USB drive takes under 10mins and another 20 tops for essential programmes, then you can let Windows runs its updates.

Also good idea to have regular backups of Bookmarks, Pics, Itunes etc.

Also if you can not find your sticker you can extract your key as mentioned here, the tool is called MagicalJellyBean key extractor.

Thank you very much 1WayJohnny. When you said, "You will now never have to use that horrid tool again." I assume you mean I won't have to hassle with the recovery disc which would include the original OEM bloatware, yes?

yes that is the tool i was talking about and when re installing using the clean ISO make sure you format the drive and nuke everything. I would even re partition it as well when making clean.

When reinstalling Windows 7 make sure you do the custom install NOT an upgrade. The next screen erase all your partitions so it is one unified un-allocated space. Then hit create NEW which will create one large partition also it is ok if you have 2-3 smaller partitions in front of the large one after creating this is normal. Then you can format that partition and in the end select the NEW C drive local disk and click NEXT to start the install process.

additionally make sure you back up anything important such as photos and documents off the machines before as well

This topic is now closed to further replies.
  • Posts

    • New AMD graphics driver fixes install issues and FSR 4.1 crashes on RX 7000 GPUs by Taras Buria AMD is rolling out yet another graphics driver. Version 26.6.4 is now available for download, bringing two important fixes. One is for those still using Windows 10 and having trouble installing driver 26.6.2. In fact, this patch is coming from the recently released hotfix, so it is not new if you are already running version 26.6.3. The second fix is for RX 7000 owners. AMD recently brought FSR 4.1 support to the previous-gen graphics cards, but there was a bug with certain games crashing when using FSR 4.1. I experienced this issue with Forza Horizon 6, so today's driver should take care of that. Here is the official changelog: Intermittent install issue seen when installing AMD Software: Adrenalin Edition 26.6.2 on Windows® 10 systems for Radeon™ RX 7000 series and above graphics products. Intermittent application crash may be observed in some games with AMD FSR Upscaling 4.1 enabled on Radeon™ RX 7000 series graphics products. Known issues include the following: Intermittent application crash or driver timeout may be observed while playing Battlefield™ 6 on AMD Ryzen AI 9 HX 370. AMD is actively working on a resolution with the developer to be released as soon as possible. Texture flickering or corruption may appear while playing Battlefield™ 6 with AMD Record and Stream on some AMD graphics products. AMD FSR Upscaling and AMD FSR Frame Generation may show as inactive in AMD Software: Adrenalin Edition while playing Battlefield™ 6 when enabled on Radeon™ RX 9000 series graphics products. Failure to install may be observed while installing AI Bundle components in some regions with limited access to HuggingFace and GitHub. Model flickering or rendering failure may be observed in Maxon Cinema 4D and Blender on Radeon™ RX 7000 series and above graphics products. Users experiencing this issue are recommended to install AMD Software: Adrenalin Edition 26.3.1. Intermittent application crash may be observed on some models while running Blender on Radeon™ RX 7000 series and above graphics products. Users experiencing this issue are recommended to install AMD Software: Adrenalin Edition 26.3.1. You can download the AMD Radeon driver 26.6.4 from the official website here. Full release notes are available on the same page.
    • Amazon may use OpenAI and Nova models after Anthropic reportedly raises costs by Karthik Mudaliar Amazon is reportedly considering to use OpenAI models and even its own Nova family of AI models after Anthropic raised the cost of using Claude inside Amazon services. According to a report from The Information, Amazon is weighing its options to reduce costs under a new arrangement with Anthropic. But back in April, Amazon said it would invest $5 billion more in Anthropic, with the possibility of adding up to another $20 billion if certain commercial milestones are met. That investment actually came on top of another $8 billion Amazon had already put into the Claude maker. Anthropic, meanwhile, committed to spend more than $100 billion over 10 years on AWS technologies, including Amazon’s Trainium chips. Amazon isn't just a customer of Anthropic but also one of the most important backers and cloud partners. This is why it makes it interesting that Amazon is considering other alternatives to handle its internal workloads. Although Amazon has been building its own options for a while now. Its Nova family of AI models was announced in late 2024 for Amazon Bedrock, with models aimed at text, image, and video tasks. Amazon pitched the model around cost and latency at that time. With that said, OpenAI has also become a more realistic option recently for AWS customers as well as for Amazon itself. Earlier this year, OpenAI brought its latest models and Codex coding agent to Amazon Bedrock, after changes to its previously more restrictive Microsoft cloud arrangement. This allowed AWS to serve even those customers who wanted other alternatives from Claude, without having to move workloads out of Amazon's cloud. Evaluating alternatives could also be due to commercial pressure and not necessarily a sign of a damaged partnership between Amazon and Anthropic. Whether or not Amazon is actually considering switching entirely to OpenAI's models or its own Nova models remains unknown at this moment.
    • Samsung introduces new AI classroom tools and interactive displays at ISTELive 2026 by Fiza Ali Samsung has announced several new education-focused software features and interactive displays for schools during ISTELive 2026, taking place in Orlando, Florida, from 28 June to 1 July. The focus of these updates is on making shared classroom displays easier to use for teachers while giving IT administrators more control over managing devices. One of the key additions is the Samsung Account Management Solution (AMS). In many schools, multiple teachers share the same interactive display throughout the day, which means signing in and setting everything up can become repetitive. With AMS, teachers can log in by scanning a QR code or tapping an NFC-enabled ID card. Once signed in, their personalised workspace, including wallpapers, bookmarks, app shortcuts, and files, can be instantly accessed through Home Personalisation. Samsung has also included a screen lock feature, allowing teachers to lock the display if they need to step away briefly. Furthermore, the company is also updating its Education Portal with new tools designed for school IT administrators. The portal will allow IT administrators to register teachers, enrol devices, and manage user access from a central dashboard. Administrators can also link NFC cards to teacher accounts, making sign-ins quicker across shared displays. Another addition is a Tags feature that lets schools organise displays by building or classroom. Those tags can also be used to send emergency notifications to selected Samsung Interactive Displays through compatible platforms such as InformaCast and Raptor. Moreover, the tech giant's AI Assistant is gaining several new features aimed at supporting everyday classroom tasks such as lesson planning and classroom engagement. One of the features is Circle to Search, which lets teachers circle text or images on the display to quickly find related information, videos, or web results without interrupting the lesson. The content can then be brought into Samsung Whiteboard. Another feature, Live Transcript, converts spoken lessons into real-time captions, which could be useful for students with hearing impairments or those in multilingual classrooms. The AI Assistant also introduces AI Summary and AI Quiz. The summary tool creates summaries of recorded lessons, while AI Quiz generates questions based on lesson content so teachers can quickly check how well students are following along. Teachers signed in through Samsung AMS can also return to their previous AI-generated lesson materials without logging in again. Alongside the software updates, Samsung has expanded its Android-based Interactive Display range with three new models: the WAF-S, WAFX-PS, and WAHX-M. The WAF-S and WAFX-PS ship with Android 16, bringing updates to security, accessibility, and overall usability while maintaining compatibility with Google's education services including Google Classroom and Google Drive through EDLA certification. Meanwhile, the new WAHX-M is the biggest addition to the lineup, introducing a 98-inch display for larger spaces such as lecture halls and conference rooms. It will also be available in 65-inch, 75-inch and 86-inch sizes. Samsung says the WAHX-M further includes on-device AI features such as voice commands, text-to-speech, and an AI calculator, alongside support for Samsung AMS and AI Assistant. Samsung AI Assistant has been available since April, while Samsung AMS and the updated Education Portal will begin rolling out in July.
    • It's been $24 (single) or $89 (4-pack) for many days on both Amazon and Walmart as far as I know. That isn't a big discount. If these end up like the 1st gen, the 4-pack will routinely get down around $80, give or take a dollar. I think they have even hit $69 at times.
    • Microsoft brings Claude to its own Azure infrastructure, powered by Nvidia GB300 Blackwell by Karthik Mudaliar Anthropic's Claude models are now generally available in Microsoft Foundry on Azure and are running on Nvidia's GB300 Blackwell Ultra systems. Nvidia wrote in its announcement that the models are hosted on Microsoft Azure and accelerated by GB300 Blackwell Ultra GPUs, with Quantum-X800 InfiniBand networking used to support larger agentic systems and specialized sub-agents that can operate across business domains. This is great for customers and enterprises that want to build autonomous and domain-specific AI agents using Claude without moving outside Microsoft’s cloud platform. Microsoft currently offers Claude models in Foundry in two forms: “Hosted on Azure,” which runs end-to-end on Azure infrastructure and is generally available, and “Hosted on Anthropic infrastructure,” which remains in preview. This separation is quite important for organizations that have procurement, compliance, data processing, or internal governance requirements tied to Azure. Anthropic currently has 11 Claude models listed in Microsoft Foundry, including Opus 4.8, Sonnet 4.6, and even the unavailable Mythos and Fable models. Billing is handled through Claude Consumption Units (CCUs). Microsoft says CCU is an invoicing unit for Claude models in Foundry, with token usage converted using Anthropic’s published per-model token rates. The usage is billed through Azure Marketplace just like models from other distributors and appears on the customer's Azure invoice, while eligible spend can count against a Microsoft Azure Consumption Commitment. For starters, GB300 NVL72 is a rack-scale, fully liquid-cooled system that combines 72 Blackwell Ultra GPUs and 36 Grace CPUs. Nvidia has listed 37TB of fast memory, 130TB/s of NVLink bandwidth, and FP4 Tensor Core performance of up to 1,440 petaflops with sparsity. The deal is also part of a three-way partnership between Microsoft, Nvidia, and Anthropic. Under the deal, Anthropic has committed to buying $30 billion in Azure compute capacity and contracting additional capacity up to one gigawatt. Nvidia and Microsoft also said they would invest up to $10 billion and $5 billion in Anthropic, respectively.
  • Recent Achievements

    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      536
    2. 2
      +Edouard
      269
    3. 3
      PsYcHoKiLLa
      150
    4. 4
      Steven P.
      98
    5. 5
      macoman
      65
  • Tell a friend

    Love Neowin? Tell a friend!