Recommended Posts

NASA and the European Space Agency have tested out a prototype system that may one day help enable Internet-like communications between Earth and robots on another planet.

Astronaut Sunita Williams, commander of the International Space Station's current Expedition 33 mission, used NASA's experimental Disruption Tolerant Networking (DTN) protocol to drive a small LEGO robot at the European Space Operations Center in Germany late last month.

The European-led experiment simulated a scenario in which an astronaut orbiting another world controls a robotic rover on the planet's surface, NASA officials said.

"The demonstration showed the feasibility of using a new communications infrastructure to send commands to a surface robot from an orbiting spacecraft and receive images and data back from the robot," Badri Younes, deputy associate administrator for space communications and navigation at NASA Headquarters in Washington, said in a statement.

"The experimental DTN we've tested from the space station may one day be used by humans on a spacecraft in orbit around Mars to operate robots on the surface, or from Earth using orbiting satellites as relay stations," Younes added.

NASA's DTN architecture is a new technology designed to enable standardized communications over long distances and through time delays, agency officials said. At its core is something called the Bundle Protocol (BP), which is similar to the Internet Protocol, or IP, that serves as the heart of the Internet here on Earth.

The big difference between the two is that IP assumes a seamless end-to-end data path, while BP is built to account for errors and disconnections ? glitches that commonly plague deep-space communications.

Data move through the BP network in a series of short hops, waiting at one node until the next link becomes available, NASA officials said.

source

NASA DTN Protocol: Interplanetary Internet, How It Works, What LEGOS Have to To With It

NASA is calling it the interplanetary Internet, and announcements have been hitting in recent weeks regarding the sending of the first emails, voicemails and, of late, news of an experiment that involved remote controlling of a LEGO space robot with it. But what?s truly cool is the technology enabling it ? it?s a protocol called Delay-Tolerant Networking, better known as DTN.

At its heart is Vint Cerf?s Bundle Protocol (BP), a version of the IP protocol he helped develop to pioneer the Internet decades ago.

In testing for several years, DTN got a major boost recently, says Badri Younes, a NASA administrator in Washington. Astronaut Sunita Williams ? she commanded the International Space Station?s current Expedition 33 mission ? used NASA?s experimental Disruption Tolerant Networking (DTN) protocol to drive a small LEGO robot at the European Space Operations Center in Germany late last month.

That was big news for the DTN and BP protocols, developed jointly by Internet pioneer +Vint Cerf and NASA?s Jet Propulsion Laboratory.

In a nutshell ? we?ll get down and dirty with the tech lower in the piece ? DTN allows a standard method of communication over long distances and through time delays, agency officials said. Its centering tech is similar to the IP protocol (that is the TCP/IP protocol) that is the building block of the Internet we use on Earth. That?s called the Bundle Protocol (BP).

The big difference between BP and IP is that, while IP assumes a more or less smooth pathway for packets going from start to end point, BP allows for disconnections, glitches and other problems you see commonly in deep space, Younes said. Basically, a BP network ? the one that will the Interplanetary Internet possible ? moves data packets in bursts from node to node, so that it can check when the next node is available or up.

?The demonstration (of the DTN controlled robot) showed the feasibility of using a new communications infrastructure to send commands to a surface robot from an orbiting spacecraft and receive images and data back from the robot,? Younes said. ?The experimental DTN we?ve tested from the space station may one day be used by humans on a spacecraft in orbit around Mars to operate robots on the surface, or from Earth using orbiting satellites as relay stations,? Younes added.

DTN-lego-NASA-ESA-robot-pic1-580x348.png

The first thing to understand is that the DTN testbed with BP driving it is in active testing now, NASA says.

Its first successful test was in 2008, when NASA announced that early DTN software for the first time enabled the transmission of more than a dozen of space images to and from a NASA science spacecraft located about 20 million miles (32M KM) from Earth. In a statement then, NASA?s Jet Propulsion Laboratory and Google?s +Vint Cerf said it kicked off the Interplanetary Internet. But what is DTN?

?The experimental DTN we?ve tested from the space station may one day be used by humans on a spacecraft in orbit around Mars to operate robots on the surface, or from Earth using orbiting satellites as relay stations,? Younes added.

In a nutshell, says NASA, ?The Disruption Tolerant Networking (DTN) program establishes a long-term, readily accessible communications test-bed onboard the International Space Station (ISS). Two Commercial Generic Bioprocessing Apparatus (CGBA), CGBA-5 and CGBA-4, will serve as communications test computers that transmit messages between ISS and ground Mission Control Centers. All data will be monitored and controlled at the BioServe remote Payload Operations Control Center (POCC) located on the Engineering Center premises at the University of Colorado ? Boulder,? reps said today.

interplanetary-internet-shot-nasa.gov_1-580x346.png

According to NASA?s Delay-Tolerant Networking Research Group (DTNRG), ?the DTN protocol is under active development.?

An experiment using DTN to control the LEGO robot is in the news today, but NASA says there are real world, military and consumer applications that affect Internet users worldwide.

?In addition to network security, research goals for the DTN activity will focus on testing and evolving important network services including naming and addressing, time synchronization, routing, network management and class of service,? NASA reps add, saying that ?the DTN experiments on the International Space Station (ISS) consist of software which is to be placed on both Commercial Generic Bioprocessing Apparatus (CGBA), CGBA-4 and CGBA-5, and then tested from a ground operations center.

What?s going on? Researchers explain ?the DTN activity will focus on testing and evolving important network services including naming and addressing, time synchronization, routing, network management and class of service. The DTN experiments on ISS consist of software (that) is to be placed on both Commercial Generic Bioprocessing Apparatus, CGBA-4 and CGBA-5, and then tested from a ground operations center. This software is not in any critical path of the CGBA operations and may be turned off at anytime. This software does not preclude the use of the CGBA units for other purposes or research support.

DTN, say NASA reps, is ?a networked architecture required to successfully complete these missions. The experiments that will be performed are designed to test the DTN protocol suite in an actual space environment, and to determine how well the protocols perform and what improvements may need to be made. The impact of the results of the research will help to advance the technical maturity of the DTN communications technology so that it is available for NASA use in both human and robotic Exploration missions.

"The Delay-Tolerant Networking Research Group (DTNRG) is a research group chartered as part of the Internet Research Task Force (IRTF). Members of DTNRG are concerned with how to address the architectural and protocol design principles arising from the need to provide interoperable communications with and among extreme and performance-challenged environments where continuous end-to-end connectivity cannot be assumed. Said another way, we are concerned with interconnecting highly heterogeneous networks together even if end-to-end connectivity may never be available. Examples of such environments include spacecraft, military/tactical, some forms of disaster response, underwater, and some forms of ad-hoc sensor/actuator networks. It may also include Internet connectivity in places where performance may suffer such as developing parts of the world.

"DTNRG members research aspects of delay-tolerant networking in a number of ways including academic publications, technical specifications, several active mailing lists, and code (reference implementation) development. DTNRG holds semi-regular teleconferences for software developers and occasional face-to-face public meetings. The public meetings usually occur in conjunction with an IETF meeting. The current co-chairs for DTNRG are Kevin Fall (Qualcomm), Stephen Farrell (Trinity College, Dublin) and J?rg Ott (Aalto University, Helsinki). Back in 2006 Stephen wrote a book on DTN. Several of the members of DTNRG participated in the (highly-related) DARPA Disruption Tolerant Networking program."

DTN research is necessary in space especially, NASA says, for the maturation of protocols to enable Internet-like communications with space vehicles, remote planetary habitats, rover vehicles and support infrastructure on a planetary surface. ?It is being tested for the first time on ISS Onboard (local) ISS , ISS-to-ground, and NASA ground communications networks will become DTN-enabled,? NASA says. ?That is the key stepping stone to enabling the Interplanetary Internet.

http://anewdomain.ne...-to-to-with-it/

Every article I've read on this has been kinda light on details, there's obviously a reason why DTN/BP is better than IP/UDP/TCP, but they don't say why specifically (The reasons given, things like latency or packet drop are an issue on IP networks to, part of it's design is to handle them)

From reading Wikipedia I get the idea that BP is message based, rather than packet based, but that's about it.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • If Valve refused to let them make the case, I wonder if they've already partnered with someone else to do it? The fact that they didn't seek permission/licence before diving straight in is incredible though
    • OpenClaw now has native mobile apps on iOS and Android by Karthik Mudaliar OpenClaw, the viral open-source personal AI agent, now has its own mobile app, available on both Android and iOS. Users can pair the app with an existing OpenClaw gateway and can start using new mobile-native features that are now available on the app. The app supports all the existing features you'd already have seen on OpenClaw's TUI, as well as some more, such as real-time and background Talk mode, action approvals, sharing from iOS, and optional access to device capabilities such as camera, screen, location, photos, contacts, calendar, and reminders. These features are available on both the Android and iOS versions of the app. What's important with these apps is that they don't run OpenClaw on your phone, but are actually just companion apps that require a running OpenClaw Gateway on an existing device, on macOS, Linux, or Windows via WSL2. To pair the app with your existing OpenClaw gateway, users need to run the command "/pair qr" on the TUI or existing chat interface, which brings up a QR code. Users can then scan this QR code to pair it up with the mobile app. There's also an option to manually pair the app by entering the host and a port. Previously, OpenClaw had been available on phones via WhatsApp, Telegram, Slack, Discord, Microsoft Teams, Matrix, and others. Now, with a native mobile app, the interface is much cleaner and more focused on just the OpenClaw, of course, with the added support for camera, screen, location, and more. It's important to note that OpenClaw comes with its own security warnings. There's always a chance of prompt injection with these tools, so users are recommended to double-check authentication, tool policy, sandboxing, and execution approvals rather than prompts alone. For users well-versed with the AI harness, a native mobile app makes it easier to approve an automation, share a link, use voice, or let an agent react to phone-side context.
    • Google pitches Spanner as one database for all AI agents with these new featues by Karthik Mudaliar Google Cloud is introducing new features within Spanner, its distributed database, as a place where enterprises should keep their data, using which AI agents could make smarter and better decisions. In a detailed blog post, Google highlighted quite a few features coming to Spanner, including relational data, graph relationships, vector search, key-value access, full-text search, and operational analytics together in one database architecture. Google says that today's systems aren't well-made for AI agents. There could be data that is present in one system, search indexes in another, embeddings in a vector database, and relationship data in a graph database. This fragmentation isn't great for AI agents to do their jobs because they don't have access to all of this data in one place. This is where Google is positioning Spanner as a solution. Spanner is already a globally distributed relational database with strong consistency, and Google wants its customers to see it as a broader data layer for AI applications. The company introduced something called Spanner Graph, along with integrated vector search, full-text search, a Cassandra-compatible key-value endpoint, and a columnar engine for analytical queries on operational data. Google also added that its ScaNN-powered vector search can support indexes with more than 10 billion vectors, while the columnar engine can make some analytical scans up to 200 times faster. All of this isn't just exclusive to the Google Cloud Platform, and there's support for multi-cloud as well. This comes via Spanner Omni, which Google says is a downloadable, containerized version of Spanner that can run on Kubernetes and in environments outside Google Cloud, including Microsoft Azure and AWS, and even on-premises infrastructure as well as edge deployments. Google says that customers who are interested in the full-featured edition should contact the company, and there's no word on commercial availability or separate pricing. Those interested can read the full blog by Google Cloud, which details these features individually.
    • Kalmuri 4.2.5 by Razvan Serea Kalmuri is your all-in-one, portable screen capture and recording solution designed for speed, simplicity, and flexibility. Whether you need a full-screen snapshot, a custom area, a scrolling webpage, or smooth video recording, Kalmuri delivers with ease. Capture text instantly from images with built-in OCR, keep floating images on top for quick reference, and use the precise color picker for perfect design matching. Customize hotkeys to work your way and share results instantly with built-in upload options. Kalmuri runs without installation, making it ideal for USB use, and offers an intuitive interface that’s easy to learn. Kalmuri key features: Video recording support (designation of whole screen and area) Whole screen, active program, window control, area application Extract text from images using optical character recognition (OCR). Support for PNG, JPG, WEBP, BMP, GIF file formats MP4 video recording powered by FFmpeg for high-quality results Full web page capture Share the captured image on the web Color extraction function Printer output Hotkey settings Adjustable via keyboard for area capture (Arrow key, Ctrl+Arrow key, Shift+Arrow key) File name format (sequential, datetime) Free to use it at work, at home, in government offices, at school, etc. Using Kalmuri portable for video recording Kalmuri’s portable version doesn’t include FFmpeg, which is required for video recording. Without it, you’ll get an “error FFmpeg.exe not found” message. To fix this, download FFmpeg from the provided link, extract it, and place FFmpeg.exe in Kalmuri’s folder. Kalmuri will then recognize it automatically, allowing you to start recording in high quality instantly. Kalmuri 4.2.5 changelog: Fixed an intermittent crash when using Area Capture Improved stability for Area Capture and screen recording Resolved a capture issue that could occur right after startup Download: Kalmuri 4.2.5 | 24.2 MB (Freeware) Download: Kalmuri Portable 4.2.5 | 2.1 MB View: Kalmuri Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • First Post
      rosiecharles earned a badge
      First Post
    • Reacting Well
      Juan Dela earned a badge
      Reacting Well
    • Week One Done
      Collagen Project earned a badge
      Week One Done
    • Reacting Well
      Wakeen1966 earned a badge
      Reacting Well
    • Rookie
      Almohandis went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      515
    2. 2
      +Edouard
      273
    3. 3
      PsYcHoKiLLa
      143
    4. 4
      Steven P.
      99
    5. 5
      macoman
      54
  • Tell a friend

    Love Neowin? Tell a friend!