[Fixed] Mobile Skin & The Front Page


Recommended Posts

Like I said, new phone here so no cache issues, yet the skin was not like this 2 days ago. Clearly, you DID change something, and others on this thread seem to agree.

Oh, and nice bit of support there... Not.

Odds are you would probably have more luck if you tried asking nicely.

  • Like 2

IF it were a fact, then can you explain why a 1 month old device, using the mobile skin, was showing wrapped headlines instead of the scrolling ones, up until 2 days ago? Things like that just don't happen without someone changing something first.

Can't explain it. However I can verify that the change did happen months ago. Every single mobile device I own has shown the new version for months.

Maybe just something weird with your particular device like a rendering bug where it was showing the landscape view on portrait.

I'm thinking your browser had some sort of setting to where it was viewing the landscape version of the site in portrait. Theres nothing really to be done about it, sorry if I got crazy with you, but don't know what else I can do to explain it has been like this for months by design.

Currently the ONLY platform that does not wrap the headlines is WP8, due to the fact ms has us on some stupid compatibility list, so its ignoring the view port.

Did the front page mobile skin get changed recently? Suddenly, I have to scroll news headings left and right to see the whole thing, where yesterday they would wrap.

Please put it back, this is a crappy change and looks awful, even on my large screen Note 2.

+1

Same happening on my Symbian Belle device using Opera Mobile since yesterday.

Can't explain it. However I can verify that the change did happen months ago. Every single mobile device I own has shown the new version for months.

Maybe just something weird with your particular device like a rendering bug where it was showing the landscape view on portrait.

I did clear my cache yesterday. So, that might be the culprit if this change was made months ago. Anyways, unwrapped news sucks! :/

We think it has something to do with a compressed mobile css file.

We may at one time had a compressed css file on the live servers and obviously that doesn't work very well

And even though it may have looked better it didn't look the way it was intended.

Maybe an option is something to look into because tbh I found the "old" way of displaying news better also (it's not annoying enough to make this a priority)

It's been like this for months here to so it does seem odd that some people only just got it, even on new devices.

I actually quite like it. I can skim the articles find one i think is interesting and then swipe if i want to see if i actually would be interested.

I'm thinking your browser had some sort of setting to where it was viewing the landscape version of the site in portrait. Theres nothing really to be done about it, sorry if I got crazy with you, but don't know what else I can do to explain it has been like this for months by design.

Currently the ONLY platform that does not wrap the headlines is WP8, due to the fact ms has us on some stupid compatibility list, so its ignoring the view port.

OK, well, firstly.. Sorry for getting snippy with you... I was just getting rather frustrated with your replies.

I can guarantee you that there are no such settings changes going on with my device. Nothing at all has changed on it between one day having the wrapped headings, and the next day having the scrolling ones. I used several browsers, and they were ALL doing it one way, and are now doing it another.

This is a change at Neowin's end, not mine.

We think it has something to do with a compressed mobile css file.

We may at one time had a compressed css file on the live servers and obviously that doesn't work very well

And even though it may have looked better it didn't look the way it was intended.

Maybe an option is something to look into because tbh I found the "old" way of displaying news better also (it's not annoying enough to make this a priority)

Assuming this is something that got changed in the last 2 days, it's very likely the culprit.

To be honest, I really can't see how ANYone would rather have to manually scroll headings rather than seeing them wrap around. One gives you all the info at a glance, the other means you have to faff around scrolling the title just to see if you're interested in the topic or not.

Why not just have multiple skins, like we do for the desktop, and let the user decide which they prefer?

The fact you have to scroll to read the full headline, has bugged me from the first day I seen it. To the fact I switch to desktop mode. Which is probably harder to use, but at least I get to read the full headlines.

I'd prefer the headlines wrapped. If I'm being honest, the whole point of a mobile site is to make it more user friendly on mobiles? cutting of half the headlines goes against that.

It usually involves me doing this when I read the mobile site: Microsoft holds real and virt....(oh this seems like an interesting article, will scroll to read the rest. . . . . on 2nd thoughts not interest, just wasted my time scrolling to read the title)

This is strange, because for me, I had the opposite happen yesterday. The scrolling headlines vanished, and were wrapped instead. The headlines were also much larger. I actually liked it better tbh. Even though the scrolling is fancy, it's a pain in the arse.

That's the thing though.. Fancy effects will NEVER replace ease of use, and if there's one thing you NEED when browsing on a phone, it's a site that's easy to use.

For me, Neowin was easy to use on a mobile 2 days ago. Now it's just pants.

This is strange, because for me, I had the opposite happen yesterday. The scrolling headlines vanished, and were wrapped instead. The headlines were also much larger. I actually liked it better tbh. Even though the scrolling is fancy, it's a pain in the arse.

What platform are you using, if this is windows phone 8 we're in the hands of microsoft to remove us from the compatibility list :(

That's the thing though.. Fancy effects will NEVER replace ease of use, and if there's one thing you NEED when browsing on a phone, it's a site that's easy to use.

For me, Neowin was easy to use on a mobile 2 days ago. Now it's just pants.

And we appreciate the feedback, maybe the next update to the mobile skin will not have scrolling headlines. But for now, we just need to pretend its metro where everything is cu...

^ Nope. Not gonna happen. Instead I'll just keep away from the news page when mobile, and seeing as part of the site is now unusable for me on mobile, I might as well do away with the other annoyance on mobile that I've put up with for now, ads.

^ Nope. Not gonna happen. Instead I'll just keep away from the news page when mobile, and seeing as part of the site is now unusable for me on mobile, I might as well do away with the other annoyance on mobile that I've put up with for now, ads.

Feel free to subscribe to remove the ads from the mobile version of the site.

Yeah, that's really going to happen when I'm not happy with the mobile skin, isn't it? I'll leave ads on in the desktop version (which IS where most of my site use is), but they're gone on mobile. Sorry, but if I'm putting up with one annoyance, then I'll lose the other one.

I noticed the scrolling a while back and It appears to be working without issue for me. I suppose it would be a bit of a surprise for it to happen all of a sudden however, being used to it I assumed you were reporting an issue as well.

I'm aware of that, actually. I'm using it to point out that I'm -really- annoyed about the now broken mobile skin.

I'll happily leave ads on on my desktop, where 85% of my Neowin access happens; but I'm only putting up with ONE annoyance on my phone, especially as it costs me part of my allowance for them. I used to use the front news page a lot, now it's useless to me.

What platform are you using, if this is windows phone 8 we're in the hands of microsoft to remove us from the compatibility list :(

And we appreciate the feedback, maybe the next update to the mobile skin will not have scrolling headlines. But for now, we just need to pretend its metro where everything is cu...

WP7.5 but it had reverted back to scrolling headlines this morning. :iiam:

Ok. Here it is how it's looking on my Opera Mobile for Symbian for the last three days or so! :/

2lcnzhz.jpg

Hope the admins could empathize with my situation....it is really irritating ....I can still see the whole headline in landscape mode but then I don't use my mobile in landscape much and it's an irritating hassle particularly in situations where you don't have both hands available! :/

This topic is now closed to further replies.
  • Posts

    • Onkyo Dolby Atmos AV receivers are really solid deals by Sayan Sen Recently we covered great deals on several soundbar models from the likes of Sony, JBL, Samsung and others for really good prices (the lowest in several months). Aside from that we also reported on the Edifier S3000MKII, a hi-fi two-way bookshelf monitor that's available for only $800. Today we bring a list of AV receivers from Onkyo that are available at great prices including the Onkyo NR7100, RZ30, and 8470 (purchase links under the specs table down below). The Onkyo TX-NR7100 and Onkyo TX-RZ30 are both 9.2-channel AV receivers designed for immersive home theater setups but they occupy slightly different tiers within Onkyo’s lineup with the RZ30 positioned as the more advanced model. The TX-NR7100 is a THX Certified 9.2-channel receiver offering up to 100 W per channel (8 ohms, 2 channels driven). It supports Dolby Atmos, DTS:X, and IMAX Enhanced formats, with flexible configurations such as 5.1.4 or 7.1.2 speaker layouts. A key highlight is its built-in Dirac Live Room Correction which should help optimize sound based on your room and its acoustics. In comparison, both models share several core capabilities though the RZ30 is geared toward enthusiasts seeking more precise calibration and system flexibility, while the NR7100 is positioned as a slightly more accessible, value-focused option with strong all-round performance. The technical specs of the RZ30 and NR7100 9.2 AVRs are given in the table below: Specification Onkyo TX-RZ30 Onkyo TX-NR7100 Power Output (FTC, 2ch driven) ~100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) 100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) Dynamic / Peak Power 9 × 170 W (6Ω, 1kHz, 1% THD, 1ch driven) 220 W/ch (6Ω, 1kHz, 10% THD, 1ch driven) Frequency Response 5 Hz – 100 kHz (+1/-3 dB) 10 Hz – 100 kHz (+1/-3 dB) THD 0.08% 0.08% Room Correction Dirac Live (full bandwidth) Dirac Live (with AccuReflex support) Immersive Audio Dolby Atmos, DTS:X, IMAX Enhanced Dolby Atmos, DTS:X, IMAX Enhanced Speaker Layout Support Up to 7.2.2 / 5.2.4 / 9.2 processing Up to 7.2.4 / 5.2.4 / 9.2 processing HDMI Inputs / Outputs 6 inputs / 2 outputs (eARC) 6 inputs / 2 outputs (Main + Sub/Zone 2) HDMI 2.1 Support 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC Video Formats HDR10+, Dolby Vision, HDCP 2.3 HDR10+, Dolby Vision, HDCP 2.3 Streaming / Network Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Get them at the links below: Onkyo TX-RZ30 9.2-Channel AV Receiver: $797.00 (Sold and shipped by Electronic Expo) Onkyo TX-NR7100 9.2-Channel AV Receiver: $699.00 (Sold and shipped by Adorma) Onkyo TX-8470 2 Ch Stereo Receiver: $449.00 (Sold and Shipped by Adorma) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links or authorized dealer links (at the time of article publishing); ensure that you purchase from such links only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • A different thing with Russia. When you say is it better, depends on things. It is better that we don't have the E.U making rules and laws that have nothing to do with them. Is the trading part better? No, that is really mucked up, but then we knew that was going to happen and we would have make agreements, like we do with other parts of the world. Freedom of movement is certainly better, but could be improved, we still need more control over our borders. do you live in the U.K?
    • So what am I quoting from them? I never listened to what Farage or his cronies said. I wanted the U.K to leave the E.u years before the referendum and it had nothing to do with Farage and his cronies. So what country do you live in? Did we work much better together? We were always at logger heads with the E.U because we disagreed with them so much. Maggie was always on at them. I would have thought the E.U was glad to get rid of us as we stopped the integration or made it a two tier. Now without us they can integrate more. I would not have voted out if it was just a trading block and we can still work together on somethings.
    • MPC-BE 1.9.0 by Razvan Serea Media Player Classic - BE is a free and open source audio and video player for Windows. Media Player Classic - BE is based on the original "Media Player Classic" project (Gabest) and "Media Player Classic Home Cinema" project (Casimir666), contains additional features and bug fixes. The BE mod (Black Edition Mod) is a skinned version of Media Player Classic Home Cinema, much better looking than the plain old MPC. MPC-BE 1.9.0 changelog: Splitters Fixed crashes in some situations. AudioSplitter Added support for the RF64 format. Fixed reading of channel layout for some WavPack files. Added support for ID3 tags for Wave64 files. Unknown Wave64 chunks are now ignored. AviSplitter Added support for 'y408' video. Improved support for 'HEVC' video. FLVSplitter Added support for VVC video. MP4Splitter Improved handling of corrupted files. MatroskaSplitter Expanded support for V_UNCOMPRESSED video codecs. Fixed support for frame rotation (ProjectionPoseRoll). Improved support for "V_MS/VFW/FOURCC / HEVC". MpcDvdVideoDecoder Fixed conversion to YUY2. Fixed display of menus for some DVD-Videos. RoQVideoDecoder Output in NV12 and YV12 formats is allowed. Full range is used. MPC Video Decoder RGB32 format will be output as a top-down bitmap by default. Added support for the "IID_MediaSideDataDOVIMetadataV2" interface. Removed support for the deprecated "IID_MediaSideDataDOVIMetadata" interface. Fixed retrieving the name of the video adapter when using NVDEC. Fixed crashes in some situations. MPC Video Converter Added support for AYUV video format. MpcAudioRenderer Improved input format validation. Optimized retrieval of supported formats for exclusive mode. Added the "Keep audio device active when paused" setting. Fixed crashes and freezes in various situations. Subtitles Added the ability to open the properties of an external subtitle renderer in the "Subtitles" settings panel. Fixed external subtitle connections for VSFilter. Fixed a crash when rendering PGS/SUP subtitles when using AVX2. YouTube Improved support for yt-dlp. The built-in YouTube parser is no longer used. Player The HTTP read strategy has been changed. If the playlist contains one entry, more key combinations can be used to control the player (jump through chapters, adjust volume). Improved support for reading ASX playlists. The translation of the MediaInfo report for Chinese, Korean and Japanese has been removed. Added blocking of 32-bit filter "PICVideo Lossless JPEG Decompressor" (pvljpg20.dll), because it crashes. Added blocking of the system filter "AVI Decompressor", which will eliminate the crash of VFW codecs. Fixed a rare crash when using the "/slave" key. Fixed a crash when getting a list of fonts for OSD. Added the ability to load an external audio file using hotkeys. Fixed opening a network path starting with \?\UNC. The "Determine duration when adding" playlist setting now works for YouTube video URLs. The "Online media services" settings panel has been redesigned. Added a "Merge files using FFmpeg" option to the file saving dialog. This option is activated when playing multiple streams obtained using yt-dlp. Added loading of local .dpl playlists ("DAUMPLAYLIST"). Fixed a hang when the user closes the player during the URL opening process. Various interface fixes. Installer Updated MPC Video Renderer 0.10.5. Updated MPC Script Source 0.2.17. Added MPC Image Source 0.3.6. Translations Updated Japanese translation (by tsubasanouta). Updated Chinese (Traditional) and Dutch translation (by beter). Updated Romanian translation (by Andrei Miloiu). Updated Hungarian translation (by mickey). Updated Turkish translation (by cmhrky). Updated German translation (by Klaus1189). Updated Chinese (Simplified) translation (by wushantao). Updated Italian translation (by mapi68). Updated Korean translation (by Hackjjang). Updated Chinese (Traditional) (by udfbe). Updated libraries dav1d 1.5.3-6-g04b69f9; ffmpeg n8.2-dev-1857-g4653e68aab; libpng git-v1.6.55-9-g7d52a8087; Little-CMS git-lcms2.18-26-gf739cda; MediaInfo git-v26.05-38-g702c9b7fd; ZenLib git-v0.4.41-91-g073f297; zlib 1.3.2. Download: MPC-BE 64-bit | Portable MPC-BE 64-bit | ~20.0 MB (Open Source) Download: MPC-BE 32-bit | Portable MPC-BE 32-bit Link: Media Player Classic - BE Home Page Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Apple reportedly looks to blacklisted Chinese memory chips as RAM prices climb by Karthik Mudaliar Image via Apple Apple is reportedly trying to get a clearance from the Trump administration to buy memory from ChangXin Memory Technologies (CXMT) to get some relief from soaring DRAM prices. As per a report by the Financial Times, Apple approached the Commerce Department more than a month ago and also spoke to other officials and allies in Washington. For starters, CXMT is a company that's already been placed on the Pentagon's list of Chinese military companies. The Chinese company is the country's top DRAM maker. For Apple, the timing is certainly awkward but not surprising. Tim Cook had recently warned that Apple would have to raise prices because AI companies are buying up large amounts of memory for data centers, and just like that, Apple raised MacBook and iPad prices. Micron also recently revealed that customers have committed billions of dollars to secure memory supply years in advance, which shows us how aggressive securing infrastructure has become. This gives suppliers such as Samsung, SK Hynix, and Micron more leverage, while pushing hardware makers to look for alternatives. CXMT is one of those alternatives, but not the simplest one. Apple has spent many years trying to diversify parts of its supply chain away from China, especially for final assembly, while still depending heavily on Chinese manufacturing and suppliers. Even domestic brands from China are moving towards CXMT and YMTC instead of relying on Samsung, Micron, and SK Hynix. For Apple, though, it would invite more scrutiny than local Chinese companies. For now, this is more like a lobbying effort rather than a confirmed supply deal. There's no official statement from either of the parties. What is clearer, though, is the pressure behind such a request. AI demand has certainly made hardware a bottleneck, and companies are trying everything they can to bring things back to normal, even if that means making politically sensitive choices. Source: Financial Times
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      493
    2. 2
      +Edouard
      227
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      Steven P.
      75
    5. 5
      FloatingFatMan
      70
  • Tell a friend

    Love Neowin? Tell a friend!