Recommended Posts

LIPA customers who spent weeks without power got zapped with their normal electric bills ? as if the outages never happened.

The clueless utility charged Sandy-soaked Long Island residents an estimated rate that covered the entire billing cycle, and the statements made no mention of potential refunds to account for the prolonged blackouts.

Jonathan Saporta was slapped with a double whammy by the Long Island Power Authority ? a $649 bill for the Long Beach home he left in October and a $281 bill for his new Great Neck pad.

He also is expecting a $1,700 bill for his storm-ravaged restaurant, Jake?s Wayback Burger, which is in hard-hit Long Beach and remains without power.

?I can?t get LIPA to acknowledge my existence on earth to talk to me about anything,? he ranted. ?But I guess they had power, so they could print my bills. Nice, right??

Saporta, 33, moved to the Great Neck home on Oct. 1 and got the bill in the mail on Wednesday for a cycle covering 43 days ? including the two weeks he spent in the dark following the Oct. 29 storm.

Even though he switched his account to the new address on Sept. 26, he still received an e-mail bill for the Long Beach house on Nov. 10 ? and somehow it was $390 more than the previous month.

?I am not paying any of my bills, that much I promise,? said Saporta. ?They can put me into collections, and I?ll fight them tooth-and-nail.

?It?s simply criminal.?

Michael Hilferty, 29, an attorney from Long Beach, was e-mailed his bill ? which was about a dollar more than the previous month ? as he chowed down on some turkey.

?To get this message on Thanksgiving was crass and classless. It?s just heartless,? he said.

His oceanfront building was flooded with 7 feet of water and inundated with 4 feet of sand, covering the LIPA meters.

Hilferty left the apartment, which remains dark and boarded up, and has been staying in Connecticut.

Yet he was hit for 29 days of electric usage, including delivery and system charges.

David Wasserman, 40, of Merrick, tried to report online the difference between his actual and estimated electric usage.

?I got some message that said, ?Service records show your usage would be higher. Please call an operator for further assistance,? ? he said. ?No one ever picked up.?

more

Link to comment
https://www.neowin.net/forum/topic/1121982-electric-bills-shock-sandy-victims/
Share on other sites

Of course no one ever picked up, everyone else who was hit is also calling them up at the same time as you. Surprising that there is no website statement/Facebook/Twitter messages from the company, but it only takes 2 braincells to realise that it's a billing error they will most likely send out revised bills on their own accord since they would become aware of the mistake VERY quickly as soon as people started receiving them. Just don't pay and wait. No way that anyone will pay their bill, no way would they be in a position to force collections on anyone in these circumstances, and the only way they are going to get cashflow again is when they get around to clearing up the mistake.

edit: They are probably off for the Thanksgiving weekend too, and that's why no website/facebook/twitter updates or calls answered.

  • Like 2

Don't really see this big deal with this, and don't really see it being greedy when they're charging for a service they provide.

It's an estimate from the electricity based on their previous usages.

Oh give it up. There's no way you could possibly defend this stupidity. Is it greed? Probably not, more an error if anything. But it's still stupid. Don't pretend like it's not. It's not like nobody knows about Sandy and or what it's done.

In some cases, there's no meter left to read.

My point exactly. :D

I know how the power company does things. We had an ice storm a few years ago and we had our power off for a solid week. Our power bill never came down because they estimated what our bill should be according to our past bills. Needless to say, after thousand of complaints they read our meters much more regularly now.

Oh give it up. There's no way you could possibly defend this stupidity. Is it greed? Probably not, more an error if anything. But it's still stupid. Don't pretend like it's not. It's not like nobody knows about Sandy and or what it's done.

As I said it's an estimate based on the previous usage of the household. How do the electricity companies know if each individual house is receiving electricity and using how much?

Until they get an actual meter reading they give out an estimate. It's really not a big deal.

As I said it's an estimate based on the previous usage of the household. How do the electricity companies know if each individual house is receiving electricity and using how much?

Until they get an actual meter reading they give out an estimate. It's really not a big deal.

"Oh look! A hurricane just ravaged the east coast! I bet they're all still using electricity though." Yeah...I'll go with stupid mistake. Thanks anyway.

  • Like 2

I think the power company is simply greedy.

Well, I can pretty confidently confirm that's true. But I'm betting that this most likely has to deal with lazy meter workers. This will especially be an issue when you have older buildings where the worker has to physically visit your house and read the meter on the outside. If there's any chance of inclement weather (rain, cold, debris) or even if the meter is on the inside of your house, the worker will normally simply guess. With guessing what many of them do is to not use the same number every time but vary it to make it look like they are doing their job. Normally you're sure to get an accurate reading maybe once a quarter or yearly.

If they have "smart" meters, and if not waited until the next billing cycle, the next billing cycle will show greatly reduced usage and a smaller than normal bill... and maybe even a credit for over-charging for the previous cycle.

Any of you who say this is no big deal have clearly never dealt with LIPA before. They charge the highest electricity rates in the US and we get **** service for it. Oh and they expect you to pay even if there's an outage, they hardly ever give credits for outages.

CL&P tried that BS after last year's storm and freak snow storm, the State reamed the company a new one and were fined for that and many other issues that arose because the Company cut corners after the storm, hell we lost power for a week, before the bills went out it had the **** had already hit the fan, they had no choice but to make sure all the meters were read

And they still managed to completely screw up again this year, hopefully the fine will be twice as large as last year's and keep doubling till they get it right

And they still managed to completely screw up again this year, hopefully the fine will be twice as large as last year's and keep doubling till they get it right

And then they put the rates up so they can cover these fines without going into shareholders profits. Customer always loses.

Any of you who say this is no big deal have clearly never dealt with LIPA before. They charge the highest electricity rates in the US and we get **** service for it. Oh and they expect you to pay even if there's an outage, they hardly ever give credits for outages.

So my conclusion is correct.

I figured they were hoping few would notice or complain about the over-charging.

The power companies must have spent a fortune in overtime labor and new equipment, wiring, etc., and they want the customers to cover all the extra expenses, even tho they got little for the money they paid.

Nothing to see here folks. This is how electric bills are done. Until they do a meter reading (usually once every 2 months) it goes by estimated use.

The customers will be credited once the reading occurs.

Here in Jacksonville, the electric and water meters are automatically read via the computer, no longer does anyone come out to physically read the meter, and now they just recently installed a new meter that allows the company to shut off the service remotely, so that do not have to take the risk on sending a tech out who might get attacked by an irate customer...

I think the rules on power companies are far too lax. They have a natural monopoly, and too many of them use it to screw their customers. I had a nightmare of a time trying to get my electricity set up correctly at my new place. I'm not one who is usually for government regulations, but any natural monopoly should have VERY strict government regulations. We have no choice who to get power from, so it's not like we can just go with another company. There's absolutely no excuse for not billing an exact amount every single month. I hadn't heard about estimates before, but that shouldn't be allowed. I don't care how many accounts you have to service, smart meters make it so you don't have to physically check now, so every bill should be billed correctly each time. I don't think they'd be ok with people paying an "estimated" amount prior to getting my bill and just making it up next bill, so why is it ok the other way around?

I think the rules on power companies are far too lax. They have a natural monopoly, and too many of them use it to screw their customers. I had a nightmare of a time trying to get my electricity set up correctly at my new place. I'm not one who is usually for government regulations, but any natural monopoly should have VERY strict government regulations. We have no choice who to get power from, so it's not like we can just go with another company. There's absolutely no excuse for not billing an exact amount every single month. I hadn't heard about estimates before, but that shouldn't be allowed. I don't care how many accounts you have to service, smart meters make it so you don't have to physically check now, so every bill should be billed correctly each time. I don't think they'd be ok with people paying an "estimated" amount prior to getting my bill and just making it up next bill, so why is it ok the other way around?

Why can't you change energy provider?

So, for those of you who don't know how this works, and obviously the customers responsible for this story being written.

If for some reason your meter cannot be read, the power company will do a pro-rated billing for the last 6 or 12 months, usually 12 months. and your bill will turn out to be whatever the average is, for that period, say 12 months.

Then next month, when they actually do a read, if your actual bill was more then the average your bill will be higher or if it was lower then the average, your bill will be lower.

Yes, some houses are gone and meters are not there anymore, the power company will just continue it's automated billing until those situations can be assessed. People jump to conclusions and get all irate without even calling the power company first or trying to talk to someone. They instantly call the local news and get on facebook/twitter to complain. Apparently that is human nature in this day and age.

Why can't you change energy provider?

Because energy providers own their own infrastructure. In the US at least, if you live in one region, your power is provided by a specific company. And if you live in another region, it would be provided by another. The power companies are also regulated be federal and state law.

If there were 15 energy companies in one region, you'd have a ton of power poles and lines running down all the streets, it would look like a really badly organized network patch panel everywhere you went.

There's absolutely no excuse for not billing an exact amount every single month.

You can't be serious? So someone's house was destroyed and no longer standing, not to mention where the meter may have ended up... that's not a good excuse? Please explain how you expect them to get an exact reading... I'll wait while you reply.

This topic is now closed to further replies.
  • Posts

    • Depends on what you need. Might be a bit clearer on what you plan to do with it. Sort of a waste if you get the newest and greatest, but don't know how to use it.
    • NTLite 2026.06.11200 by Razvan Serea NTLite is a Windows configuration tool that allows you to modify your existing Windows install or an image yet to be deployed, remove Windows components, configure and integrate, speed up the Windows deployment process. Reduce Windows footprint on your RAM and storage drive memory. Remove components of your choice, guarded by compatibility safety mechanisms, which speed up finding that sweet spot. Windows Unattended feature support, providing many commonly used options on a single page for easy setup. Easily integrate a single or multiple drivers, update or language packages. Package integration features smart sorting, enabling you to seamlessly add packages for integration and the tool will apply them in the appropriate order, keeping hotfix compatibility in check. One of the important new features of NTLite (compared to its predecessors) is the ability to modify an already installed the operating system, by removing unnecessary components. Supports Windows 11, 10, 8.1 and 7, x86 and x64, live and image. Server editions of the same versions, excluding support for component removals and feature configuration. ARM64 image support in the alpha stage. Does not support Checked/Debug, Embedded, IoT editions, nor Vista or XP. NTLite 2026.06.11200 changelog: New Secure Boot Migration support: Verification, certificate staging, and boot-manager/sector update across the Image, Updates, Apply, and Create-ISO pages (2023 CA migration, optional 2011 revocation, Anti-rollback, Boot sector choice etc) Secure Boot Host Readiness: Live host Secure Boot migration monitor and Servicing-task control Option under Image page - C:\Windows row, or load the host as the target - Updates - Secure Boot Image: 'Sort mounted images first' option for the image list in Menu-Settings UI: Hover description card for Components and Unattended pages, selectable text and quick access to Compatibility options Command line: Relay commands into the already-running instance Enables controlling already running NTLite via ntlite.exe Use /NewInstance to launch an additional instance using CLI operations (premium) UI: 'New instance' option via main menu instead of a secondary ntlite.exe prompt Apply: Hide individual Apply-page notes with a per-note dismiss (X), critical excluded Settings: 'Unsigned RDP file launch warnings' tweak (RDP client), bypassing the April 2026 security-update prompt on RDP connections Upgrade Image: Live OS and deployed image editing now unlocked on free/test licenses, same licensing as images Image: 'Recompress' option in manual dialog Remove Editions to shrink the WIM in one session Image: SWM part size set inline on the Apply page and image dialogs, split-size popup retired Image: Relative 'Last change' dates; editions grouped by build time to reduce noise Image: 'Forget - Missing' on the Edit-cache menu to mass drop entries whose folder is gone Components: Root groups reorganized - user-facing groups first, system/critical last Components: Show filter options to view components by Template or App-type, since Apps are now merged into groups Presets: Delete confirmation now lists the multi-selected preset names UI: Design update propagated to the rest of the tool UI: Filter and search match words in any order and partially, better results filtering Components Unattended: Input-locale language derives from the user locale, with an independent keyboard picker, enables combinations previously unavailable Unattended: Input-locale now allows for a user value override Unattended: Localization OOBE WinPE now can be copied with the new WinPE Copy OOBE localization toggle, enter locale settings once for both stages Updates: Downloader greys and locks updates the image already carries (hotfix and MSIX) Updates: Resume interrupted update downloads Command line: Many upgrades, see /?, now prints help to the console or redirected output UI-Translation: Finnish language added, also thanks for Chinese Traditional (Matt), French (tistou77), Italian (clarensio), Russian (RDS), Swedish (1FF), Vietnamese (Vu Anh Vu) Fix Components: Containers removal breaking Apps deployment Components: Microsoft Account had leftovers when Easy Migrate is kept Image: Export to an existing WIM improvements, Append renamed to Merge Image: Improved 26H1 live removal support Image: No more 'X:\ not accessible' popup for certain drives during image scan Presets: Manual image refresh picks up presets added/removed outside the app Tweaks: Disabled visual-effect animations no longer return after first logon on a new profile Tweaks: Live Visual Effects toggles (animations, drag full windows, font smoothing) now apply correctly Download: NTLite 2026.06.11200 | 20.5 MB (Free, paid upgrade available) Link: NTLite Home Page | NTLite Features | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Ah. La Fontana De Incontinentia ! Bella ! Bella !
    • Hi everyone, I'm planning a small network upgrade and was wondering how others prepare their networks for future needs. Do you usually invest in higher-speed switches and better cabling from the start, or do you upgrade only when necessary? I'd be interested in hearing what has worked well for you and any lessons you've learned over time. Thanks!
    • Greetings and welcome!!
  • Recent Achievements

    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
    • First Post
      carols23 earned a badge
      First Post
    • One Month Later
      Tom Willson earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      497
    2. 2
      +Edouard
      257
    3. 3
      PsYcHoKiLLa
      151
    4. 4
      Steven P.
      93
    5. 5
      macoman
      67
  • Tell a friend

    Love Neowin? Tell a friend!