Neowin: A speed bump on the Information Superhighway.


Recommended Posts

Occasionally I get big slowdowns and find the "Slowing down" thread to report them but lately its been fine, (lately as in the last few days)

Main issue I see is quoting someone and then editing that quote, sometimes it doesn't refresh as posted, even though hitting the New Posts button shows the thread as having been updated

Just to throw some info into this. I've been lurking the Neowin IRC channel for a couple of months now.

The staff (be it Neobond, Redman, Timan or the moderators general) always respond to issues brought to their attention and do so quite rapidly.

I've been witness to discussions about the issue and what they have done to fix it, this was in a public channel, so I assume as much (and likely more) has been discussed in the dev channels.

I spoke to Redmak about it (because I'm a nerd and was curious) and he listed all of the things he'd done to look into it and where he thought the issue was. His checking was methodical and his conclusions sound. He's not oblivious to the issue and it's not being ignored.

Now I run IPB for forum software on my website, and I can tell you it is HORRIBLE to work with if you start getting hit hard. Making it run faster is a ###### of a job. I'd happily dump IPB except that translating forums (the information posted) from IPB to other formats is extremely difficult. IPB tend to make enormous changes to the structure of their software/data with each release, making porting extremely difficult. They also tend to do stupid proprietary bull****. I cringe at the thought of moving and IPB forum of this size to another forum software. I cringe thinking about their update process. My site is an enormous **** to update and rarely goes as intended, and takes forever to execute. I have a ton of extra resources on my machine and the update scripts take forever to execute. It's pathetically bad.

Whilst I agree that the issues just aren't good enough, that the issues are annoying; I wholeheartedly disagree with the assertion that Neowin aren't doing their utmost to fix it.

I just think you should know more about what's going on before you start asserting wildly into the night. I'd also like to see the Neowin staff bite back at some of this stuff, but they're way to controlled (dare I say professional) for that >.>

  • Like 2

I would be inclined to think it's something that loads with every pageload... Like the mini spy, or the edit function itself... Maybe the facebook, twitter functions... I know that this is PROBABLY a dumb question but... Could it be the server?

Just to throw some info into this. I've been lurking the Neowin IRC channel for a couple of months now.

The staff (be it Neobond, Redman, Timan or the moderators general) always respond to issues brought to their attention and do so quite rapidly.

I've been witness to discussions about the issue and what they have done to fix it, this was in a public channel, so I assume as much (and likely more) has been discussed in the dev channels.

I spoke to Redmak about it (because I'm a nerd and was curious) and he listed all of the things he'd done to look into it and where he thought the issue was. His checking was methodical and his conclusions sound. He's not oblivious to the issue and it's not being ignored.

Now I run IPB for forum software on my website, and I can tell you it is HORRIBLE to work with if you start getting hit hard. Making it run faster is a ###### of a job. I'd happily dump IPB except that translating forums (the information posted) from IPB to other formats is extremely difficult. IPB tend to make enormous changes to the structure of their software/data with each release, making porting extremely difficult. They also tend to do stupid proprietary bull****. I cringe at the thought of moving and IPB forum of this size to another forum software. I cringe thinking about their update process. My site is an enormous **** to update and rarely goes as intended, and takes forever to execute. I have a ton of extra resources on my machine and the update scripts take forever to execute. It's pathetically bad.

Whilst I agree that the issues just aren't good enough, that the issues are annoying; I wholeheartedly disagree with the assertion that Neowin aren't doing their utmost to fix it.

I just think you should know more about what's going on before you start asserting wildly into the night. I'd also like to see the Neowin staff bite back at some of this stuff, but they're way to controlled (dare I say professional) for that >.>

+1

EDIT -

Something I just thought of, I rarely, if ever use IE, but the times I do visit Neowin using IE it seems to load perfectly

Just throwing this out there, but maybe make a poll seeing if issues are browser specific, I use FF 99% of the time

I have to say I nearly never see load time issues. The worst I've seen is like, 5 seconds to post.

I have all facebook/twitter etc linky things blocked.

For those encountering issues with Chrome, perhaps take a look at:

https://chrome.google.com/webstore/detail/collusion-for-chrome/ganlifbpkcplnldliibcbegplfmcfigp

https://chrome.google.com/webstore/detail/disconnect/jeoacafpbcihiomhlakheieifhpjdfeo

Neither app has ever caused my problems, and it's dramatically improved my browsing life (I'm in what's called a Congestion Zone in Australia. We have an 8mbps connection, but the back haul isn't even close to being able to provide that speed for us and those around us.)

Redesign Neowin with touch tiles and a new Metro UI, that would speed things up!

/s

Can't do a metro theme, because if anyone has been following the mobile theme, people don't like things where text is cu.....

Can't do a metro theme, because if anyone has been following the mobile theme, people don't like things where text is cu.....

How about a Minecraft page next to "Contact" (top of page)? Wh... It... se... up... of... cour...

How about disabling the 'saving text' thing I see a lot whilst typing. If my browser crashes or I accidentally close the tab, I've lost the 'saved post' anyway and know no way to get it back so surely disabling it would speed things up without removing any features?

  1. Remove integration with social media, reputation, paste formatting and all the extra crap.
  2. Replace IPB with FluxBB.
  3. ????
  4. PROFIT!!

Or Vanilla!

I still the DB queries are to blame since the home page is relatively quick. But then again, you could easily find out.

It's to stop double posting, and its a great setting for a forum to have, there is no reason to have 3 separate posts from the same member one after another, grouping them makes perfect sense unless you're a spammer

How exactly is not knowing a lame excuse?

Do you know the cause? Do you know how to fix it? No, so stop giving staff sh*t for no knowing either.

And as for your OP, bye bye then, I'm sure you'll be greatly missed

Everyone wants the site to run perfectly, report the issue and carry on, if Neowins speed issues are causing your life to collapse, and in such a way you need to leave, you have bigger issues you need to address

EDIT - I guess this explains your childish outburst

http://www.neowin.ne...__fromsearch__1

What are you so butt hurt about? Someone expressing an opinion?

I guess from now on I will just have to shut up and not complain about anything on this site, since this apparently sends you into a tizzy.

There's entire threads dealing with more or less the same issues, with at least one of them being official.

But no. You gotta put on your shining armour, get up on your high horse, and smite all detractors.

What I do during my weekends ticks you off too? Well, well.

No, I'm in the same bag as detection.

You didn't just come out and say the site has issues and farewell. You came out and attacked the site proper.

Feel free to complain, but there's a difference between complaining and being a dick. Hell, you can do whatever you want, but expect people to call you out if you go about it wrong.

Also, look at my horse, my horse is amazing..

What are you so butt hurt about? Someone expressing an opinion?

I guess from now on I will just have to shut up and not complain about anything on this site, since this apparently sends you into a tizzy.

There's entire threads dealing with more or less the same issues, with at least one of them being official.

But no. You gotta put on your shining armour, get up on your high horse, and smite all detractors.

IMHO, you answered your own question. As you pointed out, there are already threads, with at least one of them being pretty official, yet you felt the need to create another thread instead of posting in one of them. Seems a tad self serving from those observing.

What are you so butt hurt about? Someone expressing an opinion?

I guess from now on I will just have to shut up and not complain about anything on this site, since this apparently sends you into a tizzy.

There's entire threads dealing with more or less the same issues, with at least one of them being official.

But no. You gotta put on your shining armour, get up on your high horse, and smite all detractors.

What I do during my weekends ticks you off too? Well, well.

Diddums :cry:

Believe me when I say, everyone here would like to replace IPB lol

I thought there was a plan to build a forum off of the Ignition concept from the home page?

I don't think there's any need to bash the OP. The performance issues can be pretty frustrating, especially when you've spent quite a bit of time responding to someone only to find that the post won't save. Right or wrong, I can understand why he felt the need to create a new thread because there's very little official news about the issues. Thanks to this thread I now know that staff are actively looking into these problems so some good has come from it.

Edit: As an example, I had to enter this post twice because the first attempt just got stuck at the saving stage. This sort of thing happens multiple times per day for me on a range of browsers.

A free site isn't as fast as I want it to be?

*demands answers*

*jumps out the window*

This thread almost amuses me as much as a post on Google Code. "Guys, I use the wifi tether on my Galaxy S3 and now it isn't working after Jelly Bean. Can we please make this a priority? Thanks."

People are ****ing hilarious.

This topic is now closed to further replies.
  • Posts

    • If Valve refused to let them make the case, I wonder if they've already partnered with someone else to do it? The fact that they didn't seek permission/licence before diving straight in is incredible though
    • OpenClaw now has native mobile apps on iOS and Android by Karthik Mudaliar OpenClaw, the viral open-source personal AI agent, now has its own mobile app, available on both Android and iOS. Users can pair the app with an existing OpenClaw gateway and can start using new mobile-native features that are now available on the app. The app supports all the existing features you'd already have seen on OpenClaw's TUI, as well as some more, such as real-time and background Talk mode, action approvals, sharing from iOS, and optional access to device capabilities such as camera, screen, location, photos, contacts, calendar, and reminders. These features are available on both the Android and iOS versions of the app. What's important with these apps is that they don't run OpenClaw on your phone, but are actually just companion apps that require a running OpenClaw Gateway on an existing device, on macOS, Linux, or Windows via WSL2. To pair the app with your existing OpenClaw gateway, users need to run the command "/pair qr" on the TUI or existing chat interface, which brings up a QR code. Users can then scan this QR code to pair it up with the mobile app. There's also an option to manually pair the app by entering the host and a port. Previously, OpenClaw had been available on phones via WhatsApp, Telegram, Slack, Discord, Microsoft Teams, Matrix, and others. Now, with a native mobile app, the interface is much cleaner and more focused on just the OpenClaw, of course, with the added support for camera, screen, location, and more. It's important to note that OpenClaw comes with its own security warnings. There's always a chance of prompt injection with these tools, so users are recommended to double-check authentication, tool policy, sandboxing, and execution approvals rather than prompts alone. For users well-versed with the AI harness, a native mobile app makes it easier to approve an automation, share a link, use voice, or let an agent react to phone-side context.
    • Google pitches Spanner as one database for all AI agents with these new featues by Karthik Mudaliar Google Cloud is introducing new features within Spanner, its distributed database, as a place where enterprises should keep their data, using which AI agents could make smarter and better decisions. In a detailed blog post, Google highlighted quite a few features coming to Spanner, including relational data, graph relationships, vector search, key-value access, full-text search, and operational analytics together in one database architecture. Google says that today's systems aren't well-made for AI agents. There could be data that is present in one system, search indexes in another, embeddings in a vector database, and relationship data in a graph database. This fragmentation isn't great for AI agents to do their jobs because they don't have access to all of this data in one place. This is where Google is positioning Spanner as a solution. Spanner is already a globally distributed relational database with strong consistency, and Google wants its customers to see it as a broader data layer for AI applications. The company introduced something called Spanner Graph, along with integrated vector search, full-text search, a Cassandra-compatible key-value endpoint, and a columnar engine for analytical queries on operational data. Google also added that its ScaNN-powered vector search can support indexes with more than 10 billion vectors, while the columnar engine can make some analytical scans up to 200 times faster. All of this isn't just exclusive to the Google Cloud Platform, and there's support for multi-cloud as well. This comes via Spanner Omni, which Google says is a downloadable, containerized version of Spanner that can run on Kubernetes and in environments outside Google Cloud, including Microsoft Azure and AWS, and even on-premises infrastructure as well as edge deployments. Google says that customers who are interested in the full-featured edition should contact the company, and there's no word on commercial availability or separate pricing. Those interested can read the full blog by Google Cloud, which details these features individually.
    • Kalmuri 4.2.5 by Razvan Serea Kalmuri is your all-in-one, portable screen capture and recording solution designed for speed, simplicity, and flexibility. Whether you need a full-screen snapshot, a custom area, a scrolling webpage, or smooth video recording, Kalmuri delivers with ease. Capture text instantly from images with built-in OCR, keep floating images on top for quick reference, and use the precise color picker for perfect design matching. Customize hotkeys to work your way and share results instantly with built-in upload options. Kalmuri runs without installation, making it ideal for USB use, and offers an intuitive interface that’s easy to learn. Kalmuri key features: Video recording support (designation of whole screen and area) Whole screen, active program, window control, area application Extract text from images using optical character recognition (OCR). Support for PNG, JPG, WEBP, BMP, GIF file formats MP4 video recording powered by FFmpeg for high-quality results Full web page capture Share the captured image on the web Color extraction function Printer output Hotkey settings Adjustable via keyboard for area capture (Arrow key, Ctrl+Arrow key, Shift+Arrow key) File name format (sequential, datetime) Free to use it at work, at home, in government offices, at school, etc. Using Kalmuri portable for video recording Kalmuri’s portable version doesn’t include FFmpeg, which is required for video recording. Without it, you’ll get an “error FFmpeg.exe not found” message. To fix this, download FFmpeg from the provided link, extract it, and place FFmpeg.exe in Kalmuri’s folder. Kalmuri will then recognize it automatically, allowing you to start recording in high quality instantly. Kalmuri 4.2.5 changelog: Fixed an intermittent crash when using Area Capture Improved stability for Area Capture and screen recording Resolved a capture issue that could occur right after startup Download: Kalmuri 4.2.5 | 24.2 MB (Freeware) Download: Kalmuri Portable 4.2.5 | 2.1 MB View: Kalmuri Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • First Post
      rosiecharles earned a badge
      First Post
    • Reacting Well
      Juan Dela earned a badge
      Reacting Well
    • Week One Done
      Collagen Project earned a badge
      Week One Done
    • Reacting Well
      Wakeen1966 earned a badge
      Reacting Well
    • Rookie
      Almohandis went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      516
    2. 2
      +Edouard
      273
    3. 3
      PsYcHoKiLLa
      143
    4. 4
      Steven P.
      98
    5. 5
      macoman
      54
  • Tell a friend

    Love Neowin? Tell a friend!